Kodak 8004707 - MAX Water & Sport User manual

0
CIS-236
August 2002
Wind Off
Checktheframe-counterwindowtomake
sure the “0” is aligned with the arrow.
If not, grip the camera and cover the lens,
press the shutter button , and turn the
thumbwheel until the film is fully rewound.
The film is fully rewound when the thumb-
wheel rotates freely and does not stop or lock.
Insert the special tool into the end slot.
Break Off Film Door
Using the special tool, hold the camera firmly
and pull upwards to break off the film door
and remove the film.
Remove Film
Insert Tool
Exposed
Film
Opened camera
with film removed.
shutter button
thumbwheel
5•Place the used camera in the
Kodakrecyclebin.
•Visit our Web site at http://
www.kodak.com/go/kes fordetails
aboutKodak’s recycling program.
•Call Kodak’s advertising distribution
centerat(800)847-8755toorder
aKodakhand-openingtool.
CURRENT INFORMATION SUMMARY
Opening Instructions for the
KODAK FUN SAVER One-Time-Use Camera
Weareye protection when opening all cameras.
CAUTION:Before you attempt the
opening tasks, make sure the tool is
fully engaged with the camera body to
prevent tool slippage.
CAUTION: This camera body contains
a high-voltage capacitor and circuit
board. To avoid electric shock, do not
pry apart the front and back sections
of the camera. Remove only the film
from its respective compartment. If
sections of the camera are separated,
do not touch the circuit board.
© Eastman Kodak Company, 2002

Current Information Summaries provide information of limited or specific
application. Responsibility for judging the timeliness and applicability of the
information to a specific photographic use rests with the end user.
Kodak and Fun Saver are trademarks.
CIS-236, Opening Instructions for the
KODAKFUNSAVEROne-Time-Use Camera New 8-02
Consumer Imaging
EASTMAN KODAK COMPANY • ROCHESTER, NY 14650