Kogan KALED32SMTZB User manual

Open the battery cover on the remote
control.
Insert two AAA size batteries, making
sure to match the positive and negative
icons of the batteries with the icons
marked inside the battery
compartment.
Replace the battery cover.
Master Power Switch
Note As this is an Android TV, please allow it to
boot completely, then wait 10 seconds once
you see the home-screen before performing
operations.
Also, it is very important that you put the TV
into standby mode before turning it off using
the master power switch or switching it off at
the wall socket.t
Auto Search
Highlight the large preview
window (in orange) in the top
righthand corner and press OK.
Press the MENU key on the
remote to enter the “TV menu”.
Use the keys to select
“program” and press OK to
approve.
Press keys to select “Auto
Search” option and press OK
to start a new window.
In this notice window, you can
select the country in the
“Country Selection” option,
then set the “Tuner Type”
option to DTV.
POWER SWITCH
(Press this button to
turn TV on or off.)
Preview window

The number of found channels
will be shown on screen. When
the search is complete, all
channels will be stored in
memory.t
Note if you want to exit during
the search, you can press the
EXIT button on the remote
control.
Input Setup
Press the INPUT key on the remote control to enter the
“INPUT SOURCE” menu.
Use the keys to move the cursor to the desired
input and press OK to confirm.
Connecting Cables
The INPUT button is on
the top left corner of the
remote control.
This LED TV has digital multimedia
performance and can be connected
to multiple sources.
This diagram displays the available
connections to various video and
audio devices.