Kogan SMARTERHOME KAWAKLGT2SA User manual

KOGAN SMARTERHOME™ SMART
SLEEP AID & WAKE UP LIGHT 2S
KAWAKLGT2SA

To reduce the risk of fire, electric shock or injury to persons:
1. Place the appliance on a stable, level and non-slippery surface.
2. Do not use the appliance at room temperatures lower than 10°C (50°F) or higher
than 35°C (95°F).
3. This appliance is only intended for household use.
4. Ensure the adapter does not get wet.
5. Do not use this appliance in wet surroundings, or any areas where exposure to
moisture is frequent (in the bathroom; near a shower; near a swimming pool; etc.)
6. Do not let the water run into the appliance or spill water onto the appliance.
7. Only use the original adapter. If the adapter is damaged, cease use immediately
and contact Kogan.com
8. This appliance has no On/Off switch. To disconnect the appliance from the power
source, remove the plug from the wall outlet.
9. Do not use this appliance to reduce your hours of sleep. The purpose of this
appliance is to help you wake up more easily. It does not diminish your need for
sleep.
SAFETY AND WARNINGS
Note:
This product includes a button battery that can be used as an emergency power
source and has a memory function. No need to reset the alarm after power off.
Remove the insulation sheet from the button battery when using for the first time.

1
Light Brightness Adjustment
9
FM Tuning
2
Light Switch
10
FM Switch
3
Alarm 1 / Alarm 2
11
USB Output
4
Setting "-" / Volume down
12
FM Antenna
5
Snooze / Night Light Switch
13
Micro USB Input
6
Setting "+" / Volume up
14
Reset
7
Fall Asleep
15
Button Battery
8
Display Brightness / Time Setting
OVERVIEW
Light

Alarm
1. Press: turn on/off the alarm.
2. Press and hold: Set the alarm with pressing to adjust.
Fall Asleep
1. Press: turn on/off the fall asleep function.
2. Press and hold: set the fall asleep mode, with pressing to adjust.
Display Brightness and Time Setting
1. Press: adjust the time display brightness.
2. Press and hold: set the time with pressing to adjust.
Light
1. Press to turn on/off sunrise light. Press to adjust the brightness.
2. Press twice to turn on/off the coloured light. Press to adjust the light colour.
FM Radio
1. Press to turn on/off the FM; Press twice to scan radio frequencies
automatically.
2. Press to adjust the frequency (0.1MHz). Press and hold to adjust the
channel.
Night Light
Vol –
Vol +

1. Install the stand
Insert the stand directly into the mounting hole until it is securely attached.
2. Remove the stand
Hold the stand and gently press down to remove it.
ASSEMBLY
Fig. 1
Fig. 2

Time and 12/24H Setting
1. Press and hold for 2s, the icon will illuminate, and the hour indication will
start to flash. Press to adjust the hour.
2. Press to confirm the setting, the minute indication will start to flash; press
to adjust the minute.
OPERATION
Press and
hold 2s
Press to
confirm

3. Press to confirm the setting, the 12H indication will start to flash; press
to choose between a 12-hour and a 24-hour clock. Press to complete
the time setting.
Display Brightness
Press to adjust the display brightness.
3 Levels: Bright - Auto – Off.
Default Brightness: Bright.
Press to confirm
Press to switch
over
Bright Mode
Auto Mode
Off
Press to switch
over
Press to switch
over

Alarm Groups
Allow users to program 2 alarms based on individual needs. For example, set Alarm 1 for
weekdays and Alarm 2 for the weekend.
Alarm Switch (Alarm 1 as the example)
Press to turn on/off the alarm. When Alarm 1 is turned on, the icon will illuminate
on the display.
Alarm 1 on
Note:
Although times may differ, the rest of the alarm settings will be the
same
ALARM FUNCTIONS

Alarm Setting
1. Press and hold for 2s, the icon and the hour indication will start to flash.
Press to adjust the hour.
2. Press to confirm the setting, the minute indication will start to flash.
Press to adjust the minute.
3. Press to confirm the setting, the sound indication will start to flash.
Press to choose the sound:
•S-00: Muted
•S-01 – S-07: Built-in sounds
•XX MHz: The most recent FM radio frequency listened to in FM Radio mode.
Press to
confirm
Press to
confirm
Press and
hold 2s

4. Press to confirm the setting, the volume indication will start to flash.
Press to adjust the alarm volume (V-01 – V-16).
5. Press to confirm the setting, the wake-up light brightness indication will start
to flash. Press to adjust the wake-up light brightness.
•L-00: Light is off
•L-01 – L-20: Minimum brightness – maximum brightness.
6. Press to confirm the setting, the “light up prior to alarm” indication will start
to flash. Press to adjust the duration (10~60 min). Press to confirm
and complete the alarm setting.
Press to
confirm
Press to
confirm
Press to
confirm
Note:
The light will reach the maximum brightness when the alarm goes off.

Snooze and Stop
The wake-up light can simulate sunrise to gradually increase the brightness. The alarm will
go off at the set time as the wake-up light reaches the set brightness. When the alarm goes
off, you can tap to snooze, adjust the alarm volume or stop the alarm.
1. Press to snooze. After 9 minutes, the light will automatically come on and
the sound will play again. You may snooze up to 5 times, after this the alarm will
turn off.
2. Press to adjust the current volume when the alarm is ringing.
3. Press to stop the alarm.
4. If the alarm is ignored for 30 minutes, it will stop automatically.
Note:
If the alarm is turned on, it will still go off next time.

Night Light
Press to turn on/off the night light. The night light is intentionally dim, and
recommended only for use at night.
Sunrise Light
1. Press to tun on the sunrise light; the icon will illuminate.
2. Press to adjust the brightness. Press again to turn it off.
LIGHT FUNCTIONS

Coloured Light
1. Press twice to turn on the coloured light. The icon will illuminate and the
light will activate auto colour-change mode.
2. Press to manually adjust the light colour. Press and hold to quickly
adjust the light colour and the light will activate auto colour-change mode. Press
to turn it off.
Press
twice to
turn it on

Radio Switch
Press to turn on/off FM. The icon will illuminate on the display when the FM mode
is turned on.
Auto Scan
Press twice to scan radio channel automatically; the icon will start to flash. It
broadcasts the first channel after the search is complete.
FM RADIO

FM Tuning
When the FM mode is turned on, press to adjust the frequency (0.1 MHz). Press and
hold to adjust channels.
FM Volume
When the FM mode is turned on, press to adjust the volume.

Fall Asleep Switch
Press to turn on/off the fall asleep mode.
The icon will illuminate on the display when the fall asleep mode is turned on.
Fall Asleep Setting
1. Press and hold for 2s to start the setting, the icon will illuminate and the
time indication will start to flash. Press to adjust the fall asleep time (10
minutes - 120 minutes).
Fall asleep mode: ON
Press
and
hold for
2s
FALL ASLEEP FUNCTION

2. Press to confirm the setting, the fall asleep brightness indication will flash.
Press to adjust the fall asleep brightness.
•L-00: Light is off
•L-01 – L-20: Minimum brightness – maximum brightness.
3. Press to confirm the setting, the fall asleep sound indication will start to flash.
Press to adjust the fall asleep sound.
•S-00: Muted
•S-01 – S-03: Built-in sounds
•XX MHz: The most recent FM radio frequency listened to in FM Radio mode.
Press to adjust the radio frequency. Press and hold to adjust
the radio channel.
Press
and
hold
for 2s
Press to
confirm
Note:
The fall asleep brightness is the initial brightness when fall asleep mode is turned on.

4. Press to confirm the setting, the fall asleep volume indication will start to
flash. Press to adjust the volume (V-01 – V-16). Press to confirm the
completion and activation of fall asleep mode.
Fall Asleep Adjustment
Sunset simulation for peaceful bedtime: when the fall asleep mode is turned on, the light
will dim until it goes out and the sound will gradually decrease until there is no sound.
1. Press to adjust the brightness.
2. Press to adjust the volume.
Press to
confirm

Install App
Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS).
Register
If you do not have a Kogan SmarterHome™ account, register or sign in with a verification
code sent by SMS.
To register:
1. Tap to enter registration page.
2. The system automatically recognises your country/area. You can also select your
country code manually. Enter your email address and tap ‘Next.’
3. Alternatively, you can select ‘Register by mobile number’ and enter the verification
code sent to you by SMS.
4. Create a profile on the next page to define your location and room.
CONNECT TO SMARTERHOME™ APP