Kogan LARVIK STUDIO STAND User manual

USER GUIDE
LARVIK STUDIO STAND
FOR 45”-65” TVS
(KALKTVSTNDA)

3
SAFETY AND WARNINGS
CAUTION
• Read all instructions before beginning instruction and assembly.
• Failure to follow these instructions may result in property damage, serious injury, or death.
• Surpassing the rated weight (including TV weight, screws and all attached hardware and
components) may result in instability and cause possible injury.
• This product is designed to be installed on wood stud walls, solid concrete walls or brick
walls.
• This product is designed for indoor use only. Use outdoors could lead to product failure and
personal injury.
• This product contains small items that could be a choking hazard if swallowed. Keep these
items and all packaging away from young children.
• This product is not a toy. Do not allow children to play near this stand without direct
supervision.
• Make sure these instructions are read and completely understood before attempting
installation. If you are unsure of any part of this installation, please contact help.kogan.com
or a professional installer.
• The wall or mounting surface must be capable of supporting the combined weight of the
mount and the display, otherwise the structure must be reinforced.
• It is highly recommended to install with the wall anchoring kit supplied. This is to prevent
the stand from toppling, which may cause product damage, property damage or death.
Failure to anchor this product to a wall is done so at the user’s risk.
• Safety gear, safe working methods and proper tools must be used. A minimum of two
people are required for this installation. Failure to use safety gear and safe working
methods may result in property damage, serious injury or death.
• Check the joints every 3 months, and ensure any loose screws have been re-tightened
before continued use.
• If you have any questions regarding any of the instructions, contact help.kogan.com

COMPONENTS

5
ASSEMBLY
NOTE
This product weight load differs depending on the floor surface.
• Maximum load for glossy floors (such as hardwood): 25kg
• Maximum load for normal floors (such as concrete): 32kg
Step 1
Step 2
Recommended 50-150mm
Note:
Please secure the locking collar
before attaching the TV screen.

6
ASSEMBLY (cont’d)
Step 3
Step 4

7
Step 4 (continued)
NOTE
Ensure the cable clips (G) are attached to the upper bracket throughout
step 4.

8
ASSEMBLY (cont’d)
Step 4 (continued)

9
Step 5
Step 6

10
Ensure the screen doesn’t touch the aluminium plate.
ASSEMBLY (cont’d)
Step 7

11
Step 8
TOPPLING FURNITURE WARNING
• It is strongly recommended that this product is permanently fixed to the wall.
• Wall anchoring kit has been provided with this product.
• Regularly check that anchors are securely maintained.
• Stability of tall items may be affected by floor surface.
• Caution! For your safety when installing the anchor fixings, please note:
• Check any electrical wires or plumbing inside the wall before drilling any holes
(if you are unsure please seek professional advice from a qualified tradesperson).

12
DIMENSIONS
Note:
• Design and specifications are subject to change without notice.

13
NOTES

USER GUIDE
Need more information?
We hope that this user guide has given you the
assistance needed for a simple set-up.
For the most up-to-date guide for your product, as well
as any additional assistance you may require,
head online to help.kogan.com