Kogan KASMM39S12A User manual

FULL MOTION SPRING-ASSISTED RGB GAMING
MONITOR MOUNT WITH USB HUB (SINGLE)
KASMM39S12A

Read the entire user guide before you start Installation and assembly. If you have any
question regarding any of the instruction or warnings, please contact Kogan.com for
assistance.
•Please closely follow the assembly instructions. Improper installation may result in
damage or serious personal injury.
•Safety gear and proper tools must be used. This product should only be installed
by professionals.
•This product is designed to be installed on solid concrete walls, masonry walls or
wood stud walls.
•Make sure that the supporting surface will safely support the combined weight of
the equipment and all attached hardware and components.
•Use the mounting screws provided and DO NOT OVER TIGHTEN mounting
screws.
•This product contains small Items that could be a choking hazard If swallowed.
Keep these items away from children.
•This product is intended for indoor use only. Using this product outdoors could lead
to product failure and personal injury.
IMPORTANT: Ensure that you have received all parts according to the component checklist
prior to Installation. If any parts are missing or faulty, contact Kogan.com tor a replacement.
MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at
least every three months).
SAFETY & WARNINGS
CAUTION: Usage with products heavier than the rated weights indicated may
result in instability causing possible injury.

A(x1)
B(x1)
C(x1)
D(x1)
E(x1)
F(x1)
G(x1)
H(x1)
I(x1)
J M6x12 (x3)
K M6x10 (x2)
L(x2)
M 4mm (x1)
N 6mm (x1)
O (x1)
M4x12 (x4) M-A
M5x12 (x4) M-B
D5 (x4) M-C
COMPONENTS

Step 1: a-1
a-2
ASSEMBLY
A
C
J
M
L

a-3a
a-3b
D
M
K
10-55mm
D
M
K
50-85mm

a-4
a-5
G

b-1
b-2
A
E
J
M
F
L

b-3
Step 2
H
I
10-80mm
ø 10mm
(ø 3/8”)
B
M
-
C
M-B
M-A

Step 3
Lock
Unlock