Kogan SMARTERHOME KAFXIDIPCWA User manual

KOGAN SMARTERHOME™ FULL
HD INDOOR WI-FI CAMERA
(WIDE ANGLE)
KAFXIDIPCWA

Indoor Wi-Fi Camera
Power Adapter
Reset Pin
3M adhesive tape
User Guide
COMPONENTS

OVERVIEW
Lens
Infrared light
Indicator light
Microphone
Base
microSD card slot
Reset button
Speaker
Power input

microSD card
Insert a microSD card (not included) gently into the slot on the side edge of camera.
Connect power
Connect the power to the camera via the Micro USB power adapter.
OPERATION

Install App
Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS).
Register
If you do not have a Kogan SmarterHome™ account, register or sign in with a verification
code sent by SMS.
To register:
1. Tap to enter registration page.
2. The system automatically recognises your country/area. You can also select your
country code manually. Enter your email address and tap ‘Next.’
3. Alternatively, you can select ‘Register by mobile number’ and enter the verification
code sent to you by SMS.
4. Create a profile on the next page to define your location and room.
CONNECT TO SMARTERHOME™ APP

Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (the red indicator
light will be flashing rapidly).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by pressing the Reset Pin into the Reset Button on the rear of the camera for 5
seconds until red indicator light begins to flash rapidly.
Add device through network
5. Once registered, tap “+” in the upper right corner of the app’s home page to add a
new device through the network.
6. Select the product type from the list of options in the app (Home Security >
Cameras).
7. Ensure that the device is in pairing mode, with the indicator light flashing red, and
tap “Confirm light is rapidly flashing”.

8. Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important
that your SmarterHome™ device and the app are connected to the same Wi-Fi
network during setup.
9. The device will commence the pairing process and connect to the app. Ensure your
Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close until
connection is complete. Indicator light will display blue when connection is
successful.
10. After successfully being added, you will have the option to rename the device and
assign it to a location. It will now be listed on the app’s home page. Tap the device
listing to enter its control page.
Camera
30cm-100cm
Smartphone
Router
Notes:
•The device and the app have to use the same Wi-Fi network.
•
The device is only compatible with 2.4Ghz networks.

Place or Mount Your Camera
You can place your camera on a shelf or other flat surface, or you can secure it to a wall
using the 3M adhesive tape supplied.
3M tape
MOUNTING THE CAMERA

Camera status:
Status
LED Status
Camera Status
1
Red LED on
System starting up
2
Red LED blinks quickly
Standby for configuration
3
Blue LED blinks quickly
Network pairing
4
Blue LED on
Camera online
5
Red LED blinks slowly
OTA upgrade
TROUBLESHOOTING

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com