Konica Minolta BIZHUB PRO C6500E User manual

C6500/C6500e
User Manual

bizhub PRO C6500 / bizhub PRO C6500e Contents-1
Contents
1 Introduction/Safety information
1.1 Energy Star®..................................................................................... 1-5
1.2 License .............................................................................................. 1-6
1.3 Available features ........................................................................... 1-27
1.4 Explanation of manual conventions.............................................. 1-33
1.5 Legal restrictions on copying ........................................................ 1-35
1.6 For EU member states only ........................................................... 1-36
1.7 Safety information .......................................................................... 1-37
1.8 Regulation notices.......................................................................... 1-46
1.9 Laser safety..................................................................................... 1-48
1.10 Ozone release ................................................................................. 1-51
1.11 Acoustic noise (For European users only).................................... 1-51
1.12 Caution notations and labels......................................................... 1-52
1.13 Space requirements ....................................................................... 1-55
1.14 Operation precautions ................................................................... 1-61
2 Preparation for use
2.1 Machine configuration ..................................................................... 2-3
2.2 Turning on/off the power ............................................................... 2-23
2.3 Automatically returning to the default settings: Auto Reset ...... 2-26
2.4 To use machine when Power Save LED lights............................. 2-27
2.5 Making user authentication ........................................................... 2-33
3 Paper and original information
3.1 Paper information............................................................................. 3-3
3.2 Original information........................................................................ 3-14

Contents-2 bizhub PRO C6500 / bizhub PRO C6500e
4 Supplies & handling
4.1 Loading paper.................................................................................... 4-3
4.2 Loading tabbed sheets ................................................................... 4-20
4.3 Adding toner .................................................................................... 4-25
4.4 Exchanging toner recovery box ..................................................... 4-30
4.5 Replenishing staples....................................................................... 4-33
4.6 Disposing punch waste................................................................... 4-41
4.7 Disposing trimmings ....................................................................... 4-45
4.8 Removing finished sets from large capacity stacker LS-501...... 4-48
5 Before making copies
5.1 Control panel and basic screens ..................................................... 5-3
5.1.1 Control panel .................................................................................. 5-3
5.1.2 Copy screen.................................................................................... 5-6
5.1.3 Machine Status screen ................................................................... 5-8
5.2 General copy operation .................................................................. 5-10
5.3 Positioning the original ................................................................... 5-15
5.3.1 Positioning originals into the ADF................................................. 5-15
5.3.2 Positioning the original on original glass ...................................... 5-19
5.4 Setting print quantity....................................................................... 5-20
5.5 Setting job during warmup ............................................................. 5-22
5.6 To stop scanning/printing............................................................... 5-26
6 Basic job settings
6.1 Original setting .................................................................................. 6-3
6.1.1 Selecting binding direction of the original: Bind Direction.............. 6-3
6.1.2 Specifying orientation of the original: Direction .............................. 6-5
6.1.3 Specifying original type: Image/Type.............................................. 6-7
6.1.4 Copying mixed size originals: Mixed ............................................ 6-11
6.1.5 Copying Z-folded original: Z-Folded............................................. 6-13
6.1.6 Specifying original thickness: Thickness ...................................... 6-14
6.1.7 Copying non-standard size original: Custom ............................... 6-15
6.1.8 Copying tabbed originals: Tab Paper ........................................... 6-21

bizhub PRO C6500 / bizhub PRO C6500e Contents-3
6.2 Separate Scan mode ...................................................................... 6-23
6.3 Selecting color mode ..................................................................... 6-26
6.4 Zoom................................................................................................ 6-28
6.4.1 Copying in 1.000 magnification mode ......................................... 6-28
6.4.2 Changing magnification ratio ....................................................... 6-29
6.4.3 Setting magnification ratio automatically: Auto Zoom................. 6-32
6.5 Simplex/Duplex setting .................................................................. 6-33
6.5.1 Making double-sided copies using ADF...................................... 6-33
6.5.2 Making double-sided copies using original glass........................ 6-37
6.5.3 Making single-sided copies from double-sided originals ............ 6-41
6.6 Paper setting................................................................................... 6-43
6.6.1 Selecting paper size automatically: Auto Paper Select ............... 6-44
6.6.2 Turning on/off the rotation ........................................................... 6-46
6.6.3 Using paper not specified to any tray: Paper Setting .................. 6-48
6.6.4 Adjusting fixing pressure of fixing unit......................................... 6-61
6.7 Setting reserve job ......................................................................... 6-63
6.8 Copy conditions incompatible with basic job settings ............... 6-65
7 Color adjustment
7.1 About colors...................................................................................... 7-3
7.2 Color copy quality............................................................................. 7-6
7.3 Adjusting density level ................................................................... 7-15
7.4 Changing colors using RGB values .............................................. 7-23
7.5 Changing colors using HSB values............................................... 7-26
7.6 Adjusting sharpness....................................................................... 7-34
7.7 Adjusting contrast .......................................................................... 7-36
7.8 Setting image distinction level ...................................................... 7-38
7.9 Selecting screen type or compression......................................... 7-41
7.10 Changing colors using CMYK value ............................................. 7-44
7.11 Selecting glossy.............................................................................. 7-46
7.12 Copy conditions incompatible with color adjustment ................ 7-48

Contents-4 bizhub PRO C6500 / bizhub PRO C6500e
8 Application functions
8.1 To use application function .............................................................. 8-3
8.2 Inserting sheets and covers: Insert Sheet ...................................... 8-6
8.3 Locating title pages on the right side: Chapters .......................... 8-14
8.4 Lay out several pages onto one sheet: Combine Originals......... 8-18
8.5 Making a multiple page signature booklet:
Booklet Pagination .......................................................................... 8-22
8.6 Inserting different original images into printed sets:
Insert Image ..................................................................................... 8-25
8.7 Dividing spread image into right and left pages: Book Copy...... 8-29
8.8 Programming different settings for an output job:
Program Job .................................................................................... 8-35
8.9 Dividing an image for enlarged copy:
Multi-Page Enlargement ................................................................. 8-39
8.10 Erasing outside area of original: Non-Image Area Erase ............ 8-42
8.11 Reversing color in image: Neg./Positive Reverse ........................ 8-44
8.12 Repeating original image on one sheet: Image Repeat............... 8-46
8.12.1 Setting repeat times automatically ............................................... 8-46
8.12.2 Specifying repeat times: Repeat................................................... 8-51
8.13 Eliminating copy marks along borders: Frame Center Erase ..... 8-54
8.14 Copying image in the center of copy paper: Image Centering ... 8-59
8.15 Adjusting position of copy image: Page Margin - Shift ............... 8-61
8.16 Reducing images to create binding margin:
Page Margin - Reduce & Shift ........................................................ 8-66
8.17 Printing additional information: Stamp/Image Overlay................ 8-69
8.17.1 Printing stamp onto copies: Built-in Stamp.................................. 8-71
8.17.2 Printing distribution number: Set Numbering ............................... 8-73
8.17.3 Printing page number: Page No. .................................................. 8-75
8.17.4 Printing date/time: Date/Time....................................................... 8-77
8.17.5 Printing watermark onto copies: Watermark ................................ 8-79
8.17.6 Printing distribution number as watermark: Set Numbering......... 8-81
8.17.7 Detailed setting in "Stamp/Watermark"........................................ 8-83
8.18 Overlaying image onto printed pages: Image Overlay................. 8-89
8.19 Storing overlay image in HDD/ overlaying image
stored in HDD: Program Overlay.................................................... 8-91
8.20 Copy conditions incompatible with application functions .......... 8-97

bizhub PRO C6500 / bizhub PRO C6500e Contents-5
9 Output applications
9.1 Selecting an output tray................................................................... 9-3
9.2 Setting binding direction for duplex copies ................................... 9-7
9.3 Sorting/stapling copies (Finisher FS-503) ...................................... 9-9
9.3.1 Non-sort/collate/uncollate output to the primary (main) tray....... 9-11
9.3.2 Stapling output to the primary (main) tray ................................... 9-13
9.3.3 Collate/uncollate output to the secondary (sub) tray................... 9-16
9.4 Output modes using folding unit FD-501...................................... 9-18
9.4.1 Punching file holes in copies ....................................................... 9-19
9.4.2 Folding copies.............................................................................. 9-22
9.4.3 Attaching cover sheet (Post inserter on FD-501) ......................... 9-24
9.5 Output modes using saddle stitcher SD-501 ............................... 9-27
9.5.1 Making folded booklet ................................................................. 9-27
9.5.2 Folding copies.............................................................................. 9-30
9.6 Using folder/finisher functions manually...................................... 9-33
9.7 Using Finisher FS-607 .................................................................... 9-36
9.7.1 Non-sort/ Collate/ Uncollate output to the primary (main) tray.... 9-38
9.7.2 Stapling output to the primary (main) tray ................................... 9-40
9.7.3 Collate/ Uncollate output to the secondary (sub) tray ................. 9-43
9.7.4 Making folded booklet (Multi Half Fold / Fold&Staple) ................ 9-45
9.7.5 Folding copies in three (Multi tri-fold) .......................................... 9-47
9.7.6 Punching file holes in copies (Punch) .......................................... 9-49
9.8 Cover sheet feeding (Paper inserter)............................................ 9-52
9.9 Using Finisher FS-607 manually .................................................... 9-54
9.10 Loading/sorting a volume of copies
(Large capacity stacker LS-501) ................................................... 9-56
9.11 Copy conditions incompatible with output applications ............ 9-58

Contents-6 bizhub PRO C6500 / bizhub PRO C6500e
10 Advanced information
10.1 Checking feature selections before copying: Mode Check ........ 10-3
10.2 Making sample set for checking results: Proof Copy.................. 10-7
10.3 Interrupting job in progress: Interrupt mode ................................ 10-9
10.4 Storing and recalling job conditions: Mode Memory................. 10-11
10.4.1 Storing job conditions................................................................. 10-11
10.4.2 Recalling stored job settings ...................................................... 10-14
10.5 Recalling previous job settings.................................................... 10-16
10.6 Displaying screen for operation guide: Help mode.................... 10-18
10.7 Adjusting response time of touch keys: Accessibility ............... 10-20
10.8 Controlling copier from browser: Remote Panel........................ 10-21
11 Job management
11.1 Overview of job list screen ............................................................. 11-3
11.2 Job operation on job list screen .................................................... 11-4
11.2.1 To check/control reserved jobs .................................................... 11-4
11.2.2 To display output history .............................................................. 11-7
11.2.3 To display send history................................................................. 11-8
11.2.4 To check incomplete jobs............................................................. 11-9
11.2.5 To check/operate suspended jobs ............................................. 11-10
12 Screen setting outlines
12.1 Machine status screen setting outlines ........................................ 12-3
12.2 Utility screen setting outlines......................................................... 12-8
13 Paper setting
13.1 Paper setting outlines ..................................................................... 13-3
13.1.1 Setting items in paper setting ....................................................... 13-4
13.1.2 Paper type specifications ............................................................. 13-6
13.2 Register paper type/weight .......................................................... 13-10
13.3 Delete paper setting...................................................................... 13-18

bizhub PRO C6500 / bizhub PRO C6500e Contents-7
14 Machine adjustment
14.1 01 Machine Adjustment ................................................................. 14-3
14.1.1 01 Printer Adjustment \ 01 Restart Timing Adjustment ............... 14-3
14.1.2 01 Printer Adjustment \ 02 Centering Adjustment ....................... 14-6
14.1.3 01 Printer Adjustment \ 03 FD-Mag. Adjustment......................... 14-8
14.1.4 01 Printer Adjustment \ 04 CD-Mag. Adjustment ...................... 14-11
14.1.5 02 Scanner Adjustment \ 01 Restart Timing Adjustment........... 14-14
14.1.6 02 Scanner Adjustment \ 02 Centering Adjustment .................. 14-16
14.1.7 02 Scanner Adjustment \ 03 FD-Mag. Adjustment .................... 14-18
14.2 02 Image Quality Stability ............................................................ 14-21
14.3 03 Execute Adjust Operation....................................................... 14-22
14.4 04 Finisher Adjustment (FS-503) ................................................. 14-23
14.4.1 01 Stapler Position Adj. \ 01 Staple Center Position ................. 14-23
14.4.2 01 Stapler Position Adj. \ 02 Paper Width (Staple) .................... 14-26
14.4.3 01 Stapler Position Adj. \ 03 Paper Width (Straight).................. 14-29
14.5 04 Finisher Adjustment (FD-501) ................................................. 14-32
14.5.1 02 Multi Folder (Punch) Adj. \ 01 Paper Width Adjustment ....... 14-32
14.5.2 02 Multi Folder (Punch) Adj. \ 02 Hole-Punch Vertical Pos. ...... 14-35
14.5.3 03 Multi Folder (Fold) Adj. \ 01 Half Fold Position Adj. .............. 14-38
14.5.4 03 Multi Folder (Fold) Adj. \ 02 Tri-Fold-in Pos. Adj................... 14-40
14.5.5 03 Multi Folder (Fold) Adj. \ 03 Tri-Fold-out Pos. Adj. ............... 14-43
14.5.6 03 Multi Folder (Fold) Adj. \ 04 Double Parallel Pos. Adj. .......... 14-46
14.5.7 03 Multi Folder (Fold) Adj. \ 05 Z-Fold Position Adj................... 14-49
14.5.8 03 Multi Folder (Fold) Adj. \ 06 Gate Fold Position Adj.............. 14-52
14.6 04 Finisher Adjustment (LS-501) ................................................. 14-55
14.6.1 05 Stacker Adjustment \ 01 Paper Width Adjustment ............... 14-55
14.6.2 05 Stacker Adjustment \ 02 Paper Length Adjustment ............. 14-57
14.7 04 Finisher Adjustment (SD-501)................................................. 14-59
14.7.1 06 Saddle Stitcher Adj. \ 01 Staple Center Adj.......................... 14-59
14.7.2 06 Saddle Stitcher Adj. \ 02 Staple Paper Width Adj................. 14-62
14.7.3 06 Saddle Stitcher Adj. \ 03 Staple Pitch Adjustment ............... 14-65
14.7.4 06 Saddle Stitcher Adj. \ 04 Half Fold Position Adj. .................. 14-68
14.7.5 06 Saddle Stitcher Adj. \ 05 Tri-Fold Position Adj. .................... 14-70
14.7.6 06 Saddle Stitcher Adj. \ 06 Fold Paper Width Adj.................... 14-73

Contents-8 bizhub PRO C6500 / bizhub PRO C6500e
14.7.7 06 Saddle Stitcher Adj. \ 07 Trimming Adjustment .................... 14-75
14.7.8 06 Saddle Stitcher Adj. \ 08 Trimming Receiver Adj................... 14-77
14.8 04 Finisher Adjustment (RU-503/RU-504) ................................... 14-79
14.8.1 07 RU Adjustment \ 01 Curl Reform Direction............................ 14-79
14.9 Finisher Adjustment (FS-607) ....................................................... 14-81
14.9.1 01 Saddle Stitcher Stopper Adj. ................................................. 14-81
14.9.2 02 Half Fold Stopper Adjustment ............................................... 14-84
14.9.3 03 Punch Adjustment \ 01 Vertical Position Adj. ........................ 14-86
14.9.4 03 Punch Adjustment \ 02 Horizontcal Position Adj................... 14-88
14.9.5 03 Punch Adjustment \ 03 Registration Adjustment................... 14-91
14.9.6 03 Punch Adjustment \ 04 Paper Edge Detect Sensor Adj. ....... 14-94
14.9.7 04 Tri-Fold Adjustment ............................................................... 14-95
14.9.8 05 2 Position Staple Pitch Adjustment ....................................... 14-98
14.9.9 06 Paper Inserter Tray Size Adj. ............................................... 14-100
14.9.10 07 Output Quantity Limit........................................................... 14-102
15 Utility screen outlines
15.1 Chart of setting items on Utility screen......................................... 15-3
15.2 Function list of user setting.......................................................... 15-14
15.3 Function list of machine administrator setting........................... 15-21
16 User setting
16.1 User setting outlines ....................................................................... 16-3
16.2 01 System Setting............................................................................ 16-6
16.3 02 Initial Setting ............................................................................. 16-39
16.4 03 Common Setting....................................................................... 16-43
16.5 04 Copy Setting ............................................................................. 16-45
16.6 05 Scan Setting.............................................................................. 16-48
16.7 06 Printer Setting........................................................................... 16-50
16.8 07 Image Quality Setting............................................................... 16-55
16.9 08 Change Password .................................................................... 16-63

bizhub PRO C6500 / bizhub PRO C6500e Contents-9
17 Machine administrator setting
17.1 Machine administrator setting outlines........................................ 17-3
17.2 01 System Setting........................................................................... 17-7
17.3 02 Administrator Register............................................................ 17-78
17.4 03 Scanner Send Address............................................................ 17-80
17.5 04 User Auth./Account Track ...................................................... 17-98
17.6 05 Network Setting ..................................................................... 17-128
17.7 06 Common Setting.................................................................... 17-132
17.8 07 Copy Setting........................................................................... 17-134
17.9 08 Scan Setting ........................................................................... 17-137
17.10 09 System Connection ............................................................... 17-139
17.11 10 Security Setting...................................................................... 17-141
18 Touch Screen adjustment
19 Web Utilities setting
19.1 Web Utilities outlines...................................................................... 19-3
19.2 Setting account track data ............................................................ 19-5
19.2.1 Adding account track................................................................... 19-5
19.2.2 Editing account track data......................................................... 19-10
19.3 Remote panel setting ................................................................... 19-21
19.4 Setting scan transmission function ............................................ 19-24
19.5 Transmitting machine setting file................................................ 19-30
20 Security functions
20.1 Security modes ............................................................................... 20-4
21 Security strengthen mode
21.1 Description of security strengthen mode..................................... 21-3
21.2 Data protected by security strengthen mode .............................. 21-4

Contents-10 bizhub PRO C6500 / bizhub PRO C6500e
22 Machine administrator security functions
22.1 Turn security strengthen mode on/off........................................... 22-4
22.2 HDD lock password ........................................................................ 22-8
22.3 Print audit log................................................................................. 22-12
22.4 Analyze audit log ........................................................................... 22-15
22.5 Table of items saved in audit log ................................................. 22-17
23 Troubleshooting
23.1 If “Please Call Service C-####” message is displayed ................ 23-3
23.2 Clearing mishandled paper ............................................................ 23-6
23.3 If [MACHINE] tab blinks in orange ................................................. 23-9
23.4 If “Memory Full” message is displayed: Memory overflow ....... 23-13
23.5 If Power off/on screen is displayed ............................................. 23-15
23.6 Troubleshooting tips ..................................................................... 23-16
24 Maintenance
24.1 Cleaning the machine ..................................................................... 24-3
24.2 Checking copy count ...................................................................... 24-6
24.3 Cleaning conveyance belt of saddle stitcher tray ........................ 24-9
24.4 If “Trim receiver exchange” message is displayed .................... 24-12
24.5 Preventive maintenance ............................................................... 24-13
25 Specifications
25.1 Main body specifications................................................................ 25-3
25.2 Option specifications ...................................................................... 25-5
26 Appendix
26.1 How to input characters ................................................................. 26-3
26.2 Index ................................................................................................. 26-5

1Introduction/Safety
information

Introduction/Safety information 1
bizhub PRO C6500 / bizhub PRO C6500e 1-3
1 Introduction/Safety information
Thank you for choosing this machine.
This manual contains details on the operation of the various functions of the
machine, precautions on its use, and basic troubleshooting procedures. In
order to ensure that this machine is used correctly and efficiently, carefully
read this manual before using the machine. After reading the manual, store
it in the designated holder so that it can easily be referred to when questions
or problems arise during operation.
The illustrations used in this manual may appear slightly different from views
of the actual equipment.
ACKNOWLEDGEMENTS:
-KONICA MINOLTA, KONICA MINOLTA Logo, and The essentials of
imaging are registered trademarks or trademarks of KONICA MINOLTA
HOLDINGS, INC.
-bizhub is registered trademarks of KONICA MINOLTA BUSINESS
TECHNOLOGIES, Inc.
-Microsoft, MS, Windows and MS-DOS are registered trademarks or
trademarks of Microsoft Corporation in the United States and / or other
countries.
-IBM is a registered trademarks of the IBM Corporation.
-Macintosh and PowerMac are registered trademarks or trademarks of
Apple Computer, Inc. in the United States and / or other countries.
-Adobe, Adobe Logo, Acrobat, Acrobat Logo, PostScript and PostScript
Logo are registered trademarks or trademarks of Adobe Systems, Inc.
-RC4® is a registered trademark or trademark of RSA Security Inc. in the
United States and/or other countries.
-Other company names and product names used in this manual are the
registered trademarks or trademarks of their respective companies.
Copyright © 2006 KONICA MINOLTA BUSINESS TECHNOLOGIES, Inc.
Copyright © 2006 GoAhead Software, Inc. All rights reserved.

1Introduction/Safety information
1-4 bizhub PRO C6500 / bizhub PRO C6500e
EXEMPTION
-No part of this manual may be used or duplicated without permission.
-Manufacturer and Sales Company will have no liability for any influences
caused by using the printing system and this user manual.
-The information written in this user manual is subject to change without
prior notice.

Introduction/Safety information 1
bizhub PRO C6500 / bizhub PRO C6500e 1-5
1.1 Energy Star®
The ENERGY STAR®Program has been established to encourage the
widespread and voluntary use of energy efficient technologies that reduce
energy consumption and prevent pollution.
As an ENERGY STAR Partner, we have determined that this product meets
the ENERGY STAR guidelines for energy efficiency, based on the following
features.

1Introduction/Safety information
1-6 bizhub PRO C6500 / bizhub PRO C6500e
1.2 License
For Information on Incorporated Softwares
The softwares installed in this product comprise various independent
software modules and components. Each software module or component is
copyrighted by the author, i.e. the one we wrote will be copywrited by us, and
others will also be copywrited by each author.
This product uses some free softwares as a part of software components.
The following is information on the end user license agreement provided to
the software components included in this product.
Using TimeSys Linux
As an operating system, this machine uses TimeSys Linux 4.0 distributed by
TimeSys Corporation in the Unite States. For details of the OS, please
contact directly to TimeSys Corporation or their sales representative.
http://www.timesys.com/
About License Granted to Each Software Component
The GPL, LGPL, or OpenSSL license is granted to some of the software
components included in this product. Grateful acknowledgements are due to
the authors of those softwares, and to members of the community being
engaged in data management and other activities concerning the softwares.
The GPL/LGPL is, as mentioned below, designed to guarantee (or even
responsible for) the users that they can receive the source code whenever
they want. For details, please refer to our homepage.
http://konicaminolta.com/opensource/
As for our software components, we hope you understand that the source
code cannot be provided because they need not be open.
Here is a copy of the original text of the GPL, LGPL, and Open SSL licence
granted to the software components included in this product.

Introduction/Safety information 1
bizhub PRO C6500 / bizhub PRO C6500e 1-7
GNU GENERAL PUBLIC LICENSE (Version 2, June 1991)
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
Everyone is permitted to copy and distribute verbatim copies of this license
document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your freedom to
share and change it. By contrast, the GNU General Public License is
intended to guarantee your freedom to share and change free software--to
make sure the software is free for all its users. This General Public License
applies to most of the Free Software Foundation's software and to any other
program whose authors commit to using it. (Some other Free Software
Foundation software is covered by the GNU Library General Public License
instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our
General Public Licenses are designed to make sure that you have the
freedom to distribute copies of free software (and charge for this service if
you wish), that you receive source code or can get it if you want it, that you
can change the software or use pieces of it in new free programs; and that
you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to
deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you distribute
copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for
a fee, you must give the recipients all the rights that you have. You must
make sure that they, too, receive or can get the source code. And you must
show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer
you this license which gives you legal permission to copy, distribute and/or
modify the software.
Also, for each author's protection and ours, we want to make certain that
everyone understands that there is no warranty for this free software. If the
software is modified by someone else and passed on, we want its recipients
to know that what they have is not the original, so that any problems
introduced by others will not reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We
wish to avoid the danger that redistributors of a free program will individually
obtain patent licenses, in effect making the program proprietary. To prevent
this, we have made it clear that any patent must be licensed for everyone's
free use or not licensed at all.

1Introduction/Safety information
1-8 bizhub PRO C6500 / bizhub PRO C6500e
The precise terms and conditions for copying, distribution and modification
follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND
MODIFICATION
0. This License applies to any program or other work which contains a notice
placed by the copyright holder saying it may be distributed under the terms
of this General Public License. The "Program", below, refers to any such
program or work, and a "work based on the Program" means either the
Program or any derivative work under copyright law: that is to say, a work
containing the Program or a portion of it, either verbatim or with
modifications and/or translated into another language. (Hereinafter,
translation is included without limitation in the term "modification".) Each
licensee is addressed as "you".
Activities other than copying, distribution and modification are not covered
by this License; they are outside its scope. The act of running the Program is
not restricted, and the output from the Program is covered only if its contents
constitute a work based on the Program (independent of having been made
by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's source
code as you receive it, in any medium, provided that you conspicuously
and appropriately publish on each copy an appropriate copyright notice
and disclaimer of warranty; keep intact all the notices that refer to this
License and to the absence of any warranty; and give any other recipients
of the Program a copy of this License along with the Program.
You may charge a fee for the physical act of transferring a copy, and you
may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion of it,
thus forming a work based on the Program, and copy and distribute such
modifications or work under the terms of Section 1 above, provided that
you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating
that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in whole
or in part contains or is derived from the Program or any part thereof, to
be licensed as a whole at no charge to all third parties under the terms of
this License.
c) If the modified program normally reads commands interactively when
run, you must cause it, when started running for such interactive use in
the most ordinary way, to print or display an announcement including an
appropriate copyright notice and a notice that there is no warranty (or
else, saying that you provide a warranty) and that users may redistribute