Kooima K125083 User manual

1-800-522-8874
ASSEMBLY INSTRUCTIONS
K125083 - CUTTER BUMPER ATTACHMENT

KOOIMA AG K125083 Assembly Instructions Page 2of 5
Thank you for your purchase of this Kooima Ag product.
Your Cutter Bumper Attachment will need to be attached to K125061 or K125072 (2020 model
or newer) per these instructions.

KOOIMA AG K125083 Assembly Instructions Page 3of 5
-REMOVE RUBBER BUMPERS
(FH005215), RUBBER MOUNTS
(FH005228) AND NECESSARY
HARDWARE FROM K125061/K125072.
SET ASIDE TO REUSE.
-FASTEN BUMPER
ATTACHMENT (FH5001149) TO
CUTTER BUMPER
(K125061/K125072)

KOOIMA AG K125083 Assembly Instructions Page 4of 5
- 5/8 -11 X 7-1/2” HEX BOLT (62120CH80)
- 5/8 FLAT WASHER (62WUSS)
- 5/8 NYLON LOCKNUT (62NS)
-FASTEN MATTING
(FH005258) TO BUMPER
ATTACHMENT (FH5001149) WITH
1/2-13 X 2” CARRIAGE BOLTS
(5032C8)AND 1/2 NYLON LOCKNUTS
(50NS). REPEAT FOR BOTH SIDES.

KOOIMA AG K125083 Assembly Instructions Page 5of 5
-ATTACH ALL RUBBER
BUMPERS (FH005215) TO
BUMPER ATTACHMENT
(FH5001149) USE 1/2-13 X 2-3/4”
HEX BOLTS (5044CH80), 1/2 FLAT
WASHERS (50WUSS) AND
HARDWARE REMOVED FROM
K125061/K125072 AS LISTED
EARLIER IN THESE INSTRUCTIONS.