Koso Mini 3 User manual

wh003ba58a
INsTRUCTION
Temp sensor wire set (Accessory 2)
1-1
●Thank you for purchasing mini 3 the meter (Air temperature+Time+Temperature), before operating the unit, please read the instruction
thoroughly and retain it for the future reference.
12 3
2
4
5
M12 X P1.5 X 15L
M14 X P1.25 X 15L
M14 X P1.5 X 15L
M16 X P1.5 X 15L
M18 X P1.5 X 15L
M20 X P1.0 X 15L
M20 X P1.5 X 15L
M14
M16.M18
M22.M26 mm
M10.
M14 mm
M10 X P1.0
M12 X P1.5
M14 X P1.25
M14 X P1.5
M16 X P1.5 / M18 X P1.5
Temp sensor (Accessory 3)
1-2
12 3 4
Notice
1.The meter works for DC12V only!
2.For installation, please follow the steps described in manual. Any damage caused by wrong installation shall be imputed to the users.
3.Don't break or modify the wire terminal. To avoid the short circuit, please don't pull the wire when installing.
4.Do not disassemble or change any parts excluding the manual description.
5.The interior examination or maintenance should be executed by our professionals.
MARK MEANING:
WARNING!
CAUTION!
You could get the installation details from the information behind the mark.
Some processes must be followed to avoid the affection caused by wrong installation.
Some processes must be followed to avoid damages to yourself or the public.
Some processes must be followed to avoid the damage to the vehicle.
Press the
button one time
Press the
button 3
seconds
Accessory
Wiring installation instructions
Meter X 1 Mid-way connect X 3
Velcro X 1 set
Please contact the local distributor if the items you open are not the same, with the above-listed one.
Meter (Accessory 1)
WARNING! Temperature sensor is
Wrapped in the tube. Please do not cut
the tube to prevent the failure of the sensor.
Black / Ground wire connect to
the vehicle body or the engine
(It must be a good ground)
Red / Postive pole (Connect
to the battery DC 12V)
Brown / "+"Wire
connect key on DC 12V
main power switch
Temp sensor wire set X 1 Temp sensor X 1
Option accessory
Water temp
sensor adapter Cylinder head temp
sensor
Oil temp sensor
adapter Temp sensor
Some of the option accessories may not sell. For the details, please contact the local distributor.

30
11.5
60
-10~60°C
JIS D 0203 S2
●Effective temperature range
●Meter weight
●Meter size
●Meter standard
●EX: You want to set the hour
at 13.
●Press the button once to
choose the setting number.
●Press the button once to
choose the setting number.
Display range: -40~120ºC (-40~248ºF)
Display unit: ºC. ºF for alternative
Display range: -30~120ºC (-22~248ºF)
Display unit: 0.1ºC (ºF)
24H
●Air temperature
● Clock
●Temperature
●In clock screen, press the
button one time to enter
the temperature screen.
●Hold pressing the button for
3 seconds to enter the clock
setting screen (Check section
5 for detail).
Around 22g
●Effective voltage DC 12V
W60 X L30 X H11.5 mm
3
4
5
6
wh003ba58a
The following situation do not indicate malfunction of the meter.Please check the following before taking it in for repair.
※If still can't solve the problems according to the steps above, please contact with distributors or us.
The meter doesn't work
when the power is on.
Temp does not appear
or appear incorrectly.
The clock is incorrect.
●The power doesn't supply to the meter.
→Please make sure the wiring is connected. The wiring and fuse are not broken.
●It is possible that the positive wire is connected wrongly.
→Please check is the red positive wire connect to the permanent power or battery and the brown
positive wire is connected to the key on switchpositive pole.
●Please check the sensor.
Does the wiring break or falling off ?
●In temperature screen, press
the button one time to enter
the air temperature screen.
●Hold pressing the button for
3 seconds to switch between
the ºC and ºF.
●In air temperature screen,
press the button one time to
go back to the clock screen.
●Hold pressing the button for
3 seconds to switch between
the ºC and ºF.
Setting unit: ºC or
ºF.
●EX: To change the setting to
13:06.
●Press down the button for 3
seconds to move to the digital
you want to set.
●Press down the button for 3
seconds to enter the minute
setting.
●EX. Now the setting is changed
from 0:00 to 13:00.
●In clock screen, hold
pressing the button for 3
seconds to enter the clock
setting screen.
●Press down the button for 3
seconds to go back to the
clock screen.
●EX. Now the minute is changed
from 13:00 to 13:06.
Function instruction
Setting unit: ºC or
ºF.
Design and specifications are subject to change without notice!
The setting screen instruction
The clock setting
Setting range: 0~23 H.
Trouble shooting
Trouble Check item