Krüger & Matz ML0700 User manual

Modem 4G LTE
ML0700
BEDIENUNGSANLEITUNG
OWNER’S MANUAL
INSTRUKCJA OBSŁUGI
MANUAL DE UTILIZARE
DE
EN
PL
RO

Bedienungsanleitung
15
DE
SAFETY INSTRUCTIONS
Read the safety precautions carefully to ensure
the correct and safe use of your wireless
device. Keep this instruction manual for future
reference.
• Do not switch on your device when the use of
such devices is prohibited or when the device
use may cause interference or danger.
• Follow the rules and regulations in hospitals
and health care facilities. Switch o your
device near medical apparatuses.
• Switch o your device in an aircraft. The
device may cause interference to control
signals of the aircraft.
• Switch o you device near high-precision
electronic devices. The device may aect the
performance of these devices.
• Do not attempt to disassemble the device or
repair it yourself. In case of damage contact
authorized service point for check-up/repair.
• Do not place your device or its accessories
near strong electromagnetic elds.
• Do not place magnetic storage media near
the device. Radiation from the device may
erase the information stored on them.
• Protect this product from sources of heat,
direct sunlight and extreme temperatures.
• Do not use this device in a rapidly changing
temperature environment, as it may cause
condensation, and eventually damage the
device.

Owner’s manual
EN
16
• Protect this product from humidity, water
and other liquids.
• Keep your device and its accessories away
from children.
• Use only authorized accessories.

Owner’s manual
17
EN
1
2
3
PRODUCT DESCRIPTION
4
5
6
1. Standard SIM card slot: insert 4G/3G
standard SIM card here.
2. microSD card slot: insert microSD card
here.
3. USB interface: connect it with compatible
PC USB port.
4. 4G/3G signal strenght indicator:
• Blue: weak 4G/3G signal;
• Purple: strong 4G/3G signal;
• Blue/ Purple: 4G/3G network searched
but not connected;
• Blue/ Purple ashing: 4G/3G network
connected;
• Red ashing: No SIM card/network.

Owner’s manual
EN
18
INSTALLATION OF SIM AND MICROSD CARD
1. Pull the back cover downwards and remove it.
2. Install standard SIM card into the SIM card
slot with the gold plate of the card facing
downward; install microSD card into microSD
card slot as indicated on the picture.
3. Place the back cover on the device and pull
it upwards to close it.
5. 4G/3G network indicator:
• Yellow on: 4G network connected;
• Yellow o: 3G network connected;
• Purple on: 4G network searched but not
connected;
• Purple ashing: 4G network connected
• Blue on: 3G network searched but not
connected;
• Blue ashing: 3G network connected;
• Red ashing: No SIM card, SIM card
abnormal, no network;
6. External anetnna socket: insert external
antenna here.

Owner’s manual
19
EN
CHARGING
Insert the USB interface to the compatible PC
USB port to charge the device.
CONNECTING YOUR DEVICE
Note: Under dierent operating system
environments, the installation process may
dier slightly. If there are any dierences
between the actual operation and the
instruction described below, please follow the
specic installation instructions.
1. Connect the USB interface to the compatible
PC USB port.
2. Your device will automatically detect the
modem and display the installation window.
3. Carry out installation according to system
prompts.
Note: If the system does not support automatic
installation, please enter My Computer -
CD_ROM drive to start software installation.

Owner’s manual
EN
20
USER INTERFACE
Press [Connect] to establish a connection
with 4G/3G network. Select the local operator
network conguration le on [Name] drop-
down list in Settings menu (usually UI software
will automatically identify and match the
operator’s network and call the appropriate
conguration les without user settings). Then
click the [Connect] to launch 4G/3G network
connection.
Note: If there is no local network prole in
[Name] list in Settings or you need to modify
conguration parameters, enter Settings
- Network to add or modify the network
conguration le.

Owner’s manual
21
EN
STATISTICS
In this menu user can view the data rate of the
current network, the data transfer and connection
time.
RECORDS
This menu allows the user to see what amount
of transfer was used in selected period of time.

Owner’s manual
EN
22
USSD
This menu allows you to enter selected USSD
code of your network provider.
SETTINGS
Network

Owner’s manual
23
EN
This menu is used to set the 4G/3G network
access parameters and network selection priority.
If there is no user local network APN parameters,
ask the local operators to provide the necessary
information and press [New] button on the right
from the list to add the network.
PIN
This menu is used to set, modify and cancel PIN
code. When PIN code is enabled, you will be
required to enter it every time user interface is
lauched.

Owner’s manual
EN
24
TROUBLESHOOTING
Fail to connect with 4G/3G network:
• SIM card is not installed properly;
• SIM card does not have an access to the
Internet;
• SIM card is damaged;
• SIM card PIN code has been enabled; please
disable the PIN code via user interface;
• 4G/3G Manual dial mode has been set up;
please turn o.
LANGUAGE
In this menu, you can change the language of user
interface.

Owner’s manual
25
EN
SPECIFICATION
• Processor: Qualcomm MDM9200
• Supported OS: Windows XP, Vista, Win7/8/10
• Network: LTE FDD/DC-HSPA/HSPA+/HSUPA/
HSDPA/UMTS 900/2100 MHz
• Max rate:
• LTE FDD : DL/UL 100 Mbps / 50 Mbps
• HSPA+ DL: 42 Mbps, UL: 5,76 Mbps
• HSDPA/UMTS: 7,2 Mbps/ 5,76 Mbps
• Memory card slot: microSD card (up to 32 GB)
• USB port: 2.0
• SIM card slot
• External antenna socket
• Working temperature: -10°C ~ 45°C
• Storage temperature: -30°C ~ 80°C
• Storage humidity: 5% ~ 95%
• Charging voltage: 5 V / 1 A
• Dimensions: 97 x 36 x 12 mm
• Weight: 29 g

Owner’s manual
EN
26
Lechpol Electronics Sp. z o.o. Sp.k. hereby
declares that Modem 4G LTE ML0700 is
consistent with directive 2014/53/UE.
Full text of the EU Declaration of Conformity is
available at following Internet address: www.
lechpol.eu.
English
Correct Disposal of This
Product (Waste Electrical &
Electronic Equipment)
(Applicable in the European Union and other
European countries with separate collection systems)
This marking shown on the product or Its literature,
indicates that It should not be disposed with other
household wastes at the end of its working life. To
prevent possible harm lo the environment or human
health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle
it responsibly to promote the sustainable reuse of
material resources. Household users should contact
either the retailer where they purchased this product,
or their local government oce, for details of where
and how they can take this item for environmentally
safe recycling. Business users should contact their
supplier and check the terms and conditions of the
purchase contract This product should not be mixed
with other commercial wastes for disposal.
MadeinChinaforLECHPOLELECTRONICSSp.zo.o.Sp.k.,
ul. Garwolińska 1, 08-400 Miętne.