KRAFTWERK 3988 User manual

Art. 3988
Instruction Manual
Creeper
EN
max.
180 kg

2
SAFETY and GENERAL INFORMATION
For your safety, read, understand, and follow the information provided with and on this roller creeper. The owner
and operator shall have an understanding of this product and safe operating procedures before attempting to use.
The owner and operator shall be aware that use of this product may require special skills and knowledge. Make
certain that the operator thoroughly understands the inherent dangers associated with the use and misuse of the
product. If any doubt exists as to the safe and proper use of this product, remove from service immediately.
Inspect before each use. Do not use if there are broken, bent, cracked or damaged parts (including labels).
Any creeper that appears damaged in any way, or operates abnormally shall be removed from service immediately.
If the creeper has been subjected to a shock load (a load dropped suddenly, unexpectedly upon it), immediately
discontinue use until it has been inspected by KRAFTWERK authorized service center. It is recommended that an
annual inspection be done by qualified personnel. Labels and Operator’s Manuals are available from manufacturer.
PRODUCT DESCRIPTION
Heavy steel framework with powder coat paint finish. Easy rolling Ø75mm swivel composite castors. Vinyl covered
back and headrest. Suitable for the professional workshop.
* Rated Capacity: One (1) person weighing 180 kg. or less- includes person, tools, equipment, personal items.
SPECIFICATIONS
Do not use this device for any purpose other than that for which it is expressly intended.
Model Capacity Wheels Size
3988 *180 kg 6 1135 x 510 x 185mm
COMPONENTS
Description Q'ty Description Q'ty
Body cushion with framework 1
1
6
1
4
Head cushion
Screw with plate washer
Caster with nut & plate washer
L hex wrench
Body Cushion With Framework
Head Cushion
Casters (6)
Figure 1

3
• Read, understand, and follow all printed materials provided with and on this product before use.
• Do not exceed rated capacity! Rated capacity is: 180 kg (includes person, tools, equipment,
personal items).
• Sit down gently! Avoid shock loads caused by jumping or falling onto creeper.
• Do not stand on creeper.
• Do not get the creeper wet or use in damp or wet locations or areas where there is condensation.
• Keep out of the reach of children! This device is not appropriate for children’s use.
• Use on smooth, level surfaces only.
CARE AND MAINTENANCE
MAINTENANCE
Little maintenance is required of this device. Wipe clean as needed. Use mild upholstery cleaner (not caustic) to
clean seat as needed.
Never add lubricant to casters!
ASSEMBLY INSTRUCTIONS (Refer to Figure 1)
1. Use a suitable screwdriver to attach the head cusion to head frame. Hand tighten with screwdriver.
2. Use a 5 mm hex-key to attach the casters to the rear frame. Insert the threaded fasteners from above, the
casters from below (as seen in Fig. 1), then hand tighten with hex key.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list
and Figure 1 illustration. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement parts.
Dimensions: 1135 x 510 x 185 mm
WARNING
WARRANTY
We do not take responsibility for any damage caused by misuse or any use that is not in compliance
with the safety standards described herein.
CUSTOMER SERVICES
Contact your local importer of your specialized dealer to obtain address of our service department.
FROM DATE OF PURCHASE RECEIPT
2 YEAR GUARANTEE
ON MATERIAL OR PRODUCTION DEFECTS

www.kraftwerktools.com
KRAFTWERK Europe AG
Mettlenbachstrasse 23
CH-8617 Mönchaltorf
Switzerland
Tel. [phone]
KRAFTWERK Sàrl.
25, rue du Stade
F – 67870 Bischoffsheim
France
Tel. [phone]