Kramer 104R User manual

KRAMER ELECTRONICS LTD.
USER MANUAL
MODEL:
104R
RF Distribution Amplifier
P/N: 2900-001010 Rev 3

104R – Contents
i
Contents
1Introduction 1
2Getting Started 2
2.1 Achieving the Best Performance 2
2.2 Safety Instructions 3
2.3 Recycling Kramer Products 3
3Overview 4
3.1 Defining the 104R RF Distribution Amplifier 4
4Connecting the 104R 5
5Technical Specifications 7
Figures
Figure 1: 104R RF Distribution Amplifier 4
Figure 2: Connecting the 104R RF Distribution Amplifier 6

104R - Introduction
1
1 Introduction
Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been
providing a world of unique, creative, and affordable solutions to the vast range of
problems that confront video, audio, presentation, and broadcasting professionals
on a daily basis. In recent years, we have redesigned and upgraded most of our
line, making the best even better!
Our 1,000-plus different models now appear in 11 groups that are clearly defined
by function: GROUP 1: Distribution Amplifiers; GROUP 2: Switchers and Routers;
GROUP 3: Control Systems; GROUP 4: Format/Standards Converters; GROUP 5:
Range Extenders and Repeaters; GROUP 6: Specialty AV Products; GROUP 7:
Scan Converters and Scalers; GROUP 8: Cables and Connectors; GROUP 9:
Room Connectivity; GROUP 10: Accessories and Rack Adapters and GROUP 11:
Sierra Products.
Congratulations on purchasing your Kramer 104R RF Distribution Amplifier, which
is ideal for the following typical applications:
CATV and MATV systems
Modulation applications (for example, hotel systems)
Retail stores, schools, medical facilities
Home theater systems

2
104R - Getting Started
2 Getting Started
We recommend that you:
Unpack the equipment carefully and save the original box and packaging
materials for possible future shipment
Review the contents of this user manual
Go to http://www.kramerelectronics.com to check for up-to-date
user manuals, application programs, and to check if firmware
upgrades are available (where appropriate).
2.1 Achieving the Best Performance
To achieve the best performance:
Use only good quality connection cables (we recommend Kramer high-
performance, high-resolution cables) to avoid interference, deterioration in
signal quality due to poor matching, and elevated noise levels (often
associated with low quality cables)
Do not secure the cables in tight bundles or roll the slack into tight coils
Avoid interference from neighboring electrical appliances that may adversely
influence signal quality
Position your Kramer 104R away from moisture, excessive sunlight and dust
This equipment is to be used only inside a building. It may only be
connected to other equipment that is installed inside a building.
i
!

104R - Getting Started
3
2.2 Safety Instructions
Caution:
There are no operator serviceable parts inside the unit
Warning:
Use only the Kramer Electronics input power wall
adapter that is provided with the unit
Warning:
Disconnect the power and unplug the unit from the wall
before installing
2.3 Recycling Kramer Products
The Waste Electrical and Electronic Equipment (WEEE) Directive 2002/96/EC
aims to reduce the amount of WEEE sent for disposal to landfill or incineration by
requiring it to be collected and recycled. To comply with the WEEE Directive,
Kramer Electronics has made arrangements with the European Advanced
Recycling Network (EARN) and will cover any costs of treatment, recycling and
recovery of waste Kramer Electronics branded equipment on arrival at the EARN
facility. For details of Kramer’s recycling arrangements in your particular country
go to our recycling pages at http://www.kramerelectronics.com/support/recycling/.
!

4
104R - Overview
3 Overview
The 104R is a high−performance distribution amplifier for RF signals. It takes one
RF (CATV/MATV) signal and distributes it to four identical outputs.
In addition, the 104R features:
A single RF input such as a typical CATV/MATV signal and distributes it to
four identical outputs
Extra wide bandwidth of up to 800 MHz, ensuring that the unit remains
transparent in the most critical applications
Matches the inputs and outputs to 75Ω impedance
Comes with convenient screw-on “F” type connectors
3.1 Defining the 104R RF Distribution Amplifier
This section defines the 104R.
Figure 1: 104R RF Distribution Amplifier
#
Feature
Function
1
OUT 1 “F” type connector
Connects to the RF source 1
2
OUT 2 “F” type connector
Connects to the RF source 2
3
INPUT “F” type connector
Connects to the RF acceptor
4
OUT 3 “F” type connector
Connects to the RF source 3
5
OUT 4 “F” type connector
Connects to the RF source 4
6
ON LED
Illuminates when receiving power
7
12V DC
+12V DC connector for powering the unit

104R - Connecting the 104R
5
4 Connecting the 104R
Always switch off the power to each device before connecting it to your
104R. After connecting your 104R, connect its power and then switch
on the power to each device.
To connect the 104R as illustrated in the example in Figure 2:
1. Connect the TV source (for example, a satellite receiver) to the “F” type
INPUT connector.
2. Connect one or more of up to 4 of the following “F” type OUT connectors to
the respective TV acceptors:
You do not have to connect all the outputs.
OUT 1 to TV acceptor 1 (for example, a TV)
OUT 2 to TV acceptor 2 (for example, a TV)
OUT 3 to TV acceptor 3 (for example, a recorder)
OUT 4 to TV acceptor 4 (for example, a TV)
3. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity.
4. Switch on the TV source and the TV acceptors.
The RF INPUT signal automatically distributes to the TV acceptors.
i

6
104R - Connecting the 104R
Figure 2: Connecting the 104R RF Distribution Amplifier

104R - Technical Specifications
7
5 Technical Specifications
INPUT:
1 RF, 0.5Vpp/75Ω (max.) on an “F” type connector
OUTPUTS:
4 RF, 0.5Vpp/75Ω (max.) on “F” type connectors
BANDWIDTH:
40MHz to 3000MHz (+/−3dB)
COUPLING:
AC
RF GAIN:
+6dB typical across band
NOISE FIGURE:
3.5dB
POWER CONSUMPTION:
12V DC, 80mA
OPERATING TEMPERATURE:
0° to +40°C (32° to 104°F)
STORAGE TEMPERATURE:
-40° to +70°C (-40° to 158°F)
HUMIDITY:
10% to 90%, RHL non-condensing
DIMENSIONS:
12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:
0.32kg (0.71lbs) approx.
ACCESSORIES:
Power supply, mounting bracket
OPTIONS:
RK−3T 19" rack adapter
Specifications are subject to change without notice at http://www.kramerelectronics.com