Kraun KR.MZ User manual

www.kraun.it
USB ADSL Modem V.2
User’s Manual
Manuale Utente
Cod. KR.MZ

www.kraun.it2
Quick Guide
Contents
1. Introduction 6
1.1 System Requirements 6
1.2 Package Contents 6
2. Product Features 7
2.1 Features and Benefits 7
2.2 Applications 7
2.3 ADSL Compliant 8
2.4 ATM and PPP Protocols 8
2.5 Encapsulation Mode 8
2.6 Supported OS 9
2.7 Interface 9
3. Hardware Indicators and Connectors 9
3.1 LED Descriptions 9
3.2 Front Panel 10
3.3 Rear Panel 10
3.4 Connect the Related Devices 10
4. Hardware Installation 11
4.1 Before You Start 11
4.2 Hardware Installation 11
5. Software Installation 12
5.1 Before You Start 12

www.kraun.it 3
Quick Guide
5.2 Windows Installation 13
5.3 Linux Installation 25
5.3.1 Directory Structure 26
5.3.2 Compiling the Driver 26
5.3.3 Loading Modem Driver 27
5.3.4 Verification of driver loading successfully 29
6. Customizing Communication Settings 30
6.1 Accessing Communication Settings on Windows 30
7. The DSL Status Application 33
7.1 Windows DSL Status Application 33
8. Software Uninstall 35
8.1 Windows Uninstall 35
9. Modifying TCP/IP Networking Option 38
9.1 WAN USB Driver 38
9.1.1 Microsoft Windows XP 38
9.1.2 Microsoft Windows 2000 42
9.1.3 Microsoft Windows ME 48
9.1.4 Microsoft Windows 98SE 52
9.2 LAN USB Driver 56
9.2.1 Microsoft Windows XP 56
9.2.2 Microsoft Windows 2000 59
9.2.3 Microsoft Windows ME 61
9.2.4 Microsoft Windows 98SE 65

www.kraun.it4
Quick Guide
1. Introduction
This USB ADSL Modem is an external ADSL modem that con-
necting broadband ADSL line to USB connector of PC system.
The USB ADSL Modem uses advanced ADSL chipset solution
with complete set of industry standard features for high-speed
Internet access. The USB ADSL Modem offers easy installation
and cost-effective connection for SOHO and residential users.
USB bus powered modem without external power is conven-
ient for using. This product complies with FCC part15 regula-
tions and CE approval.
1.1 System Requirements
• Pentium II 233MHz processor or above
• At lease 32MB RAM (64MB recommended)
• 20MB available hard disk or more
• Windows 98SE/2000/ME/XP
• Available USB port
• CD-ROM drive
• ADSL service enabled on your telephone line
• Windows 98SE installation CD, which will be prompted for
during installation.
1.2 Package Contents
• ADSL Modem

www.kraun.it 5
Quick Guide
• RJ-11 phone cable
• USB cable
• Software driver CD
• EZ setup guide
If any of above items is missing or damaged, please contact
your local dealer immediately.
2. Product Features
2.1 Features and Benefits
• USB specifications v1.1 compliant.
• USB bus power. Additional power adapter is unnecessary.
• Full rate operation with up to 8 Mbps downstream data rate
and up to 1 Mbps upstream data rate enables high-speed
Internet access.
• Friendly GUI configuration and management software.
• Firmware downloadable feature provides performance and
feature enhancements in the future release.
• Enables end-to-end ATM support, which allows traffic man-
agement and QoS.
2.2 Applications
• High-speed Internet access
• Video-On-Demand
• Telecommuting

www.kraun.it6
Quick Guide
• E-Commerce
• On-line gaming
• Video conferencing.
2.3 ADSL Compliant
• ANSI T1.413 issue 2
• ITU-T G.992.1 (G.dmt)
• ITU-T G.992.2 (G.lite)
• G.994.1 (G.hs, Multimode).
2.4 ATM and PPP Protocols
• RFC 2516 (PPP over Ethernet)
• RFC 2364 (PPP over ATM)
• RFC 1577 (Classical IP over ATM)
• Multi Protocol over AAL5 (RFC1483 / 2684)
• VC and LLC multiplexing.
2.5 Encapsulation Mode
For WAN Connection
• PPP over ATM LLC (RFC 2364)
• PPP over ATM NULL (RFC 2364)
• PPP over Ethernet (RFC 2516)

www.kraun.it 7
Quick Guide
For LAN Connection
• Classical IP over ATM (RFC 1577)
• IP over ATM Bridged LLC (RFC 2684)
• IP over ATM Bridged VC (RFC 2684)
• IP over ATM Routed LLC (RFC 2684)
• IP over ATM Routed VC (RFC 2684)
VPI / VCI Settings
• VPI value: 0~255
• VCI value: 32~65535.
2.6 Supported OS
• Windows 98SE, ME, 2000, XP
• Mac / Linux (optional).
2.7 Interface
• One USB port compliant with USB v1.1, full speed (12Mbps)
• One RJ11 port for ADSL connection.
3. Hardware Indicators and Connectors
3.1 LED Descriptions
• When modem is establishing the connection, the LED will be
blinking.
• When modem is connected, the LED will be on steadily.

www.kraun.it8
Quick Guide
3.2 LED Descriptions
Connect this connector with Type-B end of USB cable.
3.3 Rear Panel
Connect this connector with RJ-11 cable.
3.4 Connect the Related Devices
1)Connect the provided RJ-11 cable into LINE port on the real
panel of the modem and insert the other end to splitter.
2)Connect the Type-A end of USB cable to your PC.
The diagram below illustrates a connection example.

www.kraun.it 9
Quick Guide
4. Hardware Installation
4.1 Before You Start
In MAC operating systems, you need to install the device driv-
ers first (see next chapter) and then perform the hardware in-
stallation steps below.
4.2 Hardware Installation
Install the USB ADSL Modem by following these steps with the
PC running:
1. Insert the rectangular end of a USB cable into the USB port
of your PC.
2. Insert the square end of the USB cable into the USB port pf
the USB ADSL Modem.
In Windows operating systems, the USB ADSL Modem will be
detected and the
“Found New Hard-
ware Wizard” will
be displayed on the
PC’s screen. Pro-
ceed with the soft-
ware installation
in the next section,
using the operating
system appropriate
to you.

www.kraun.it10
Quick Guide
5. Software Installation
The software installation procedures vary depending upon the
operating system of your PC. Be sure to follow the instructions
provided for the operating system appropriate for you.
5.1 Before You Start
The following information may be required for software instal-
lation. Contact your DSL service provider before proceeding
with software installation.
• IP Address Settings – the software installation process al-
lows the server to dynamically assign IP Address settings.
If your application requires static setting of specific address
information you will need to know:
IP Address
Subnet Mask (for Bridged Ethernet applications only)
Default Gateway (for Bridged Ethernet applications only)
• Name Server Information – the software installation proc-
ess allows the server to dynamically assign Name Server
Address settings. If your application requires static setting
of specific address information you will need to know:
Primary DNS Address
Secondary DNS Address
Primary WINS Address
Secondary WINS Address
• Type of Driver to be installed – WAN and LAN software driv-
ers are supported.

www.kraun.it 11
Quick Guide
Note: Required if not using default value
• ATM Virtual Path ID (VPI)
Note: Required if not using default value
• ATM Virtual Circuit ID (VCI)
Note: Required if not using default value
• Encapsulation type
Note: Required if not using default value
• Modulation type
Note: Required if not using default value
• User Name (for PPP applications only)
• Password (for PPP applications only).
5.2 Windows Installation
The software setup process for Microsoft Windows applications
(XP, 2000, Me, and 98SE) is described below with operating sys-
tem specific differences noted. The USB ADSL Modem should be
connected to your PC prior to installing the driver software. No
other Windows programs
should be running on your
PC during the software in-
stall process.
Step 1: The Microsoft Win-
dows “Found New Hard-
ware Wizard” will be dis-
played, click “Cancel”.

www.kraun.it12
Quick Guide
Step 2: Insert “ADSL MODEM Driver CD”, the front page of Easy
Setup window will be appeared.
Install Driver: Click here to install USB ADSL modem driver.
User Manual “Conexant AccessRunner USB ADSL”: Click
here to read user’s manual.
Acrobat: Click here to install Acrobat Reader.
Panda: Click here to start Anti Virus program.
Step 3: Click “Install Driver”, and then select the country you
are at:

www.kraun.it 13
Quick Guide
PS. If your country is not on the list, please click “*” to next page.
Select “Other”. Please see page 17.
Step 4: After country selection, the window below will appear.
Select the ISP, and then click “``” to next page.

www.kraun.it14
Quick Guide
Step 5: Enter your account “User Name, Password and Pass-
word Confirm” then click “``” to next page:
Step 6: Confirm modem settings and click “``” to next page.
Step 7: Software kit searches available USB modem.

www.kraun.it 15
Quick Guide
Step 8: Please wait for while during the device driver is install-
ing.
[For Windows XP and 2000]
Step 9: After the device driver is installed completed, you will
see the window as below, click “X” to exit the wizard.

www.kraun.it16
Quick Guide
[For Windows ME]
Step 9: After the device driver is installed completed, you will
see the window as below.
Step 10: Follow the previous appeared window, DSL Modem
Setup Wizard will appear and remind you the system will
automatically reboot within 10 seconds.

www.kraun.it 17
Quick Guide
Step 11: After reboot your system, please wait for DSL Modem
Setup wizard complete the device configuration process;
then, your ADSL USB Modem will be installed properly.
[For Windows 98SE]
Step 9: For Widows 98SE, during the installation process, the
system will ask you to insert Windows 98SE installation CD,
please insert the CD and click “OK”.

www.kraun.it18
Quick Guide
Step 10: Insert Windows 98SE CD-ROM in the selected driver
and click OK.
Step 11: After the device driver is installed completely, you will
see the window as below.

www.kraun.it 19
Quick Guide
Step 12: Follow the previous appeared window, DSL Modem
Setup Wizard will appear and remind you the system will
automatically reboot within 10 seconds.
Step 13: After system reboot, please wait for DSL Modem Set-
up wizard complete the device configuration process and
then your ADSL USB Modem will be installed properly.
Note: If your country ISP Setting is not in the ISP list,
If your country is not on the list, please click “*” to next page
and select “Other”,

www.kraun.it20
Quick Guide
a) After you select ”Other”, the window below will appear.
PS. Please refer to the following table before you select “Typi-
cal Default WAN Setting” or “Typical Default LAN Setting”.
Connection Type Encapsulation and Multiplexing method Network Information
WAN PPP over ATM LLC (RFC 2364) Internet Account
information:
PPP over ATM NULL (RFC 2364) •User name
PPP over Ethernet (RFC 2516) •Password
LAN Classical IP over ATM (RFC 1577) TCP/IP information:
IP over ATM Bridged LLC (RFC 2684) •IP address
IP over ATM Bridged VC (RFC 2684) •Subnet mask
IP over ATM Routed LLC (RFC 2684) •DNS
IP over ATM Routed VC (RFC 2684) •Gateway
Table of contents
Popular Modem manuals by other brands

Multitech
Multitech MultiConnect microCell MTCM2 quick start

Beckhoff
Beckhoff CU8210-D001-0101 manual

Multitech
Multitech MultiModem ZBA USB MT5634ZBA-USB user guide

Multitech
Multitech MultiConnect Cell 100 Series MTC-EV3 user guide

Black Box
Black Box USR3453C Specifications

Multitech
Multitech MultiModem GPRS with Ethernet Interface Brochure & specs