contain dual signals. Follow steps 1
through 6 under Learning above,
then add the following steps:
7. Aim the original remote at the
front of the universal Krell remote
a second time. Press and hold the
same key on the original remote
until the universal Krell remote
displays a successful message.
8. Edit the key name on the univer-
sal Krell remote, or press OK to
confirm that you want the key to
retain the copied command.
Notes
1. The optimum receiving distance is
5–8 in. or 12.7–20.3 cm for remote
learning. If a problem report is dis-
played during the learning process,
adjust the distance between the 2
remotes and try again.
2. Check the remaining memory for
learning additional commands,
see Status, on page 7.
Brand Name
Setup the pre-programmed code by
selecting a brand name.
1. Before starting the setup proce-
dure, turn on the device for the
code you want to install in the
remote. For example, turn on the
Krell DVD Standard.
2. Press BRAND NAME from the
setup menu.
3. Select the device that is on. For
example, select DVD.
4. A brand name list in alphabetical
order is displayed.
5. Press the up or down arrows to
browse the brand name list, or
press a character to access a
brand name. For example, press
Kfor KRELL.
6. Press the brand name of your
choice, and it will be highlighted.
For example, press KRELL.
7. Press TEST, then press the test
keys on the touch screen, or
press any hard key to test the
selected code.
8. Press the CH+ hard key and then
the BACK key on the touch screen
to access the brand name search
menu again.
This section describes the SETUP
functions on the menu used to set up
device codes on the Universal Krell
Touch Screen Remote.
For a description of the REMOTE SET-
TING functions for the remote, see
page 7.
Press the MENU hot key and then
press SETUP on the main menu
page. Select: LEARNING, BRAND
NAME, ENTER CODE or AUTO
SEARCH.
Use the device code list and the
steps under ENTER CODE to set up
the menu quickly and easily. For a
written description of the steps
involved, see Enter Code, on page 6.
Learning (Copying)
Copy a key command from an origi-
nal remote control to the Universal
Krell Touch Screen Remote.
1. Press the LEARNING key on the
setup menu screen.
2. Select the device to which you
want to copy a command. For
example, select TV.
3. Press the key on the universal
Krell remote, which accepts the
copy command.
4. Aim the original remote at the
front of the universal Krell
remote, from a distance of 5–8
in. or 12.7–20.3 cm.
5. Press and hold the key on the
original remote until the universal
Krell remote responds with a suc-
cessful message. This normally
takes a short while.
6. Edit the key name on the univer-
sal Krell remote, or press OK to
confirm that you want the key to
retain the copied command.
7. Press another key to continue
copying more commands.
8. Press the MENU short cut key to
return to the main menu page, or
press the HOME short cut key to
return to the HOME page.
DUAL SIGNAL LEARNING
If a learned command works for
your A/V equipment only occasional-
ly, the original remote control may
Universal Krell Remote 5
Main Menu Setup
Functions
There are 7 function categories on
the main menu of the remote:
SETUP
EDIT*
PREFERENCE*
REMOTE SETTING
SMART*
CLONE*
PC LINK*
*For information on all items marked with
an asterisk, please download the owner’s
reference for the universal Krell remote,
on the Krell website.
