KREPEL TOUCH VIEW User manual

TOUCH VIEW
OPERATING AND
USERS MANUAL
EN
Battery charger
controller
Accessory for
DOLPHIN Pro charger

TOUCHVIEW-01 TOUCHVIEW-01
EN
SAFETY PRECAUTIONS SAFETY PRECAUTIONS
TO PREVENT ANY RISK OF ELECTRIC SHOCK
OR FIRE, READ THIS MANUAL CAREFULLY
BEFORE INSTALLING THE DEVICE.
In the event of any problems or unclear points,
please contact KREPEL.
This equipment is not designed for use by people
(including children) with diminished physical, sen-
sory or mental capacities or people without expe-
rience or knowledge of such equipment, unless
they have received instructions in the use of the
equipment from a person responsible for their sa-
fety or are under the supervision of such a person.
Ensure that children are supervised to avoid them
playing with the device.
This equipment contains components that may
cause electric arcs or sparks, when connecting
cables for example. To prevent any risk of re or
explosion, do not install this equipment close to
inammable materials, liquids or gases.
Precautions for installation.
To prevent any risk of irreversible damage to
the equipment, ensure that you follow the
recommendations below scrupulously.
4This device must not be exposed to dripping
water, splashes or dust of any nature.
4In no sense is this device a toy.
4It should not be left in the hands of a child.
Precautions for connection.
To prevent any risk of electric shock or irre-
versible damage to the equipment, ensure
that you follow the recommendations be-
low.
The installation to which the device is connected
must conform to applicable standards.
To prevent undesirable heating, ensure that ca-
ble cross-sections are correct and that connec-
tors are properly tightened.
Precautions when switching on.
To prevent any risk of electric shock
when switching on or during operation,
you should comply strictly with the
following instructions.
The product should not be disassembled under
any circumstances.
This device complies with the applicable regu-
lations governing transmitted interference and
immunity from external disturbances.

TOUCHVIEW-01
TOUCHVIEW-01
EN
GENERAL CHARACTERISTICSCONTENTS of the BOX
ON RECEIPT OF THE PRODUCT
Contents of the packaging
Please check the contents of the package when
opening:
4TouchView box
with colour touch screen
4Chrome bezel
4Connection cable (3 m)
4Bag of xing screws
4User manual
GENERAL CHARACTERISTICS
TouchView is an accessory used to supervise
and control the DOLPHIN PRO range of 12V
and 24V chargers.
TouchView is simple to connect; it is supplied
directly from the charger.
TouchView may be used remotely (in the cab
for example), to view the charging status from
a distance.
TouchView has a non-volatile memory allowing
configuration settings to be stored, even when
there is no power, when it is reactivated.
Its intuitive navigation allows the user to be-
come familiar with it very quickly.
QUICK INSTALLATION GUIDE

TOUCHVIEW-01
TOUCHVIEW-01
EN
GENERAL CHARACTERISTICS GENERAL CHARACTERISTICS
Connection cable between the charger and
TouchView:
PRECAUTIONS TO TAKE WHEN INSTALLING
Any connection error could result in irreversible
damage to the equipment.
You should, therefore, give this aspect particular
attention.
TERMINAL CONNECTIONS
Wiring No
Supply + (8 to 16V) 1
CAN H 2
CAN L 3
0V 4
Clipping on the bezel
Position the bezel
Press rmly
Unclipping the bezel
Use a tool (screwdriver) as a lever
Do not push against the screen
Wiring
Yellow Supply +
Green CAN H
Red CAN L
Black OV

TOUCHVIEW-01
TOUCHVIEW-01
EN
TECHNICAL SPECIFICATIONSTECHNICAL SPECIFICATIONS
Technical specications
POWER SUPPLY
Supply voltage 12V dc (8 to 16V)
Consumption
150 mA approx. at maximum bri-
ghtness and 50mA with the screen
turned off
DISPLAY
Type of display
2.4 inch TFT screen with 320x240
pixel resolution and adjustable
backlight
Parameter selection Touch screen
SCREEN PARAMETERS
Languages
Choice of ve languages
English, French, Italian,
Spanish, German
Screen background Congurable: three available
colours
Screen brightness Adjustable
CHARGER PARAMETERS DISPLAY
Charger output
voltage Measurement accuracy ±1%
Charger current Measurement accuracy ±1%
Charging phases Boost, Abs, Float
Current cycle char-
ging time Hours: Minutes
Selected charging
cycle type 10 different types
Battery temperature -10°C to +100°C
(measurement accuracy ±2%)
Charger tempera-
ture
-10°C to +100°C
(measurement accuracy ±2%)
CONFIGURATION PARAMETERS
Charger maximum
power Four levels: 30%, 50%, 70%, 100%
Relay output polarity Default to on or off
Activation / Deacti-
vation of the charger Switching the charger on or off
PICTOGRAM ALARM FUNCTIONS
Battery or electronics
temperature fault
Charger supply
voltage fault
Fuse fault
Charger output
voltage fault
CAN bus fault
GENERAL
Operating tempe-
rature -10°C to +50°C
Storage temperature -20°C to +70°C
Relative humidity 10% to 70% condensation free
Electronics Resin tropicalised
Presentation Flush-mounting device, 93 mm
diameter
Flush mounting 72 mm dia. (use a 73 mm hole saw)
depth 15 mm
Fixing Four screws supplied
Overall dimensions
(width x height x
depth)
93 mm dia. x 23 mm
Weight < 500 g
Connection RJ9 connector

TOUCHVIEW-01
TOUCHVIEW-01
EN
TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS
USE
Main screen
Access to the
«Function» menu
Charging phase indi-
cator or reporting a
fault situation
Output voltage indi-
cator Output current
indicator
Charger power
indicator
Charging cycle
type indicator
Access to the
charger OFF switch
Automatic return to the main
screen if command not conr-
med within 25 seconds.

UK
Functions menu
Congurable screen
parameters:
4Language
4Unit
4Display
4Screen background
4Brightness
Set-up menu
Supervisor menu
Help menu
Screen
set-up
Charger
set-up
Congurable charger
parameters:
4Max. power
4Alarm relay polarity
Temperature display:
4Battery
4Charger MOS
4Charger diode
Charging information
display:
4Current charging
cycle time
4Charging phase
(Boost, Equal, Float)
4Power (30% – 50% –
70% – 100%)
4Charging cycle type
0-Open lead
1-Sealed lead
2-Calcium lead
3-Delphi
4-Optima
5-Wet lead winter sto-
rage
6-Sealed lead winter
storage
7-Gel and AGM
8-Power supply
9-LiFeSo4+BMS
Description of the
charging phases.
Description of how to
select the type of char-
ging cycle.
Description of the diffe-
rent charger faults and
conditions for clearing
them.

TOUCHVIEW-01
TOUCHVIEW-01
EN
WARRANTY WARRANTY
Warranty
TO AVOID ANY RISK OF INCORRECT USE OF THE EQUIP-
MENT, READ CAREFULLY THE LIST
OF EVENTS OR POTENTIAL FAULTS NOT COVERED BY THE
PRODUCT WARRANTY
4Pressing on the screen when tting or removing
the product could damage it (crack the screen).
4Dropping the device could irreversibly distort
the enclosure or smash the touch screen or cer-
tain electronic components.
4Modifying the enclosure (drilling extra holes in
it in particular) could cause mechanical stress on
the screen or electronics.
4Water splashes or drips inside the device could
cause irreversible damage to the electronics.
4Powering the set-up from an unsuitable source
(as a general rule, a supply voltage outside the
specication). Risk of irreversible damage to the
equipment.
Precautions when scrapping
This device contains electronic components and
materials that must be recycled at the end of the
product’s life for environmental reasons.
All devices at the end of their life must therefore
be either returned to the local distributor or to a
specialist electronic equipment recycling com-
pany.
EC conformity
This device conforms to current European stan-
dards and is CE marked. Its certicate of confor-
mity is available upon request.

For further information or assistance,
please contact:
KREPEL LTD.
9000, Varna, Bulgaria
Tel: [phone]
Fax: [phone]
e-mail: [email protected]
www.krepel.bg