KRIBEN Air SMALL+ User manual

Kriben AS | Energivej 3, DK-4180 Sorø, Denmark | Phone: [phone] |Mail: [e-mail] |Web: www.kriben.dk
Kriben Air©
Assembly Instruction – Montageanleitung
Instructions d’assemblage – Instrucciones de montaje
Samlevejledning
Max load 10kg per Shelf
SMALL |SMALL+ |MIDI |WIDE |TALL |LARGE

Package content:
Tools:
Important!
Anchor Plate: 1 pcs
Shelfs: 2 pcs (M +L)
Wall Bracket: 1 pcs
Screws: 2/4 pcs (ø4,5 x 50mm - cross head)
Rawl plugs: 2/4 pcs (ø6 x 30mm)
Please read the full assembly instruction before assembly, to secure
smooth and correct assembly of Your new Kriben Air©
Avoid position of Shelfs close to door openings, corners and do not place
them where kids run.
Max load 10kg per Shelf. The Shelfs are designed to bend downwards as
load increases - Do not overload!
Drill machine with ø6mm drill
Level
Measurer
Screwdriver or machine with PZ2 bit (Cross head)
2

Secure strong wall condition before assembly of the product.
Details:
UNLOCK Shelfs - top-handle UP!LOCK Shelfs - top-handle DOWN!
Wall Bracket
Shelf
Shelf
Anchor Plate
3

Attachment of the Wall Bracket:
Use a level to make sure the Wall Bracket is horizontal and mark the hole’s
positions on the wall with a pen, use the Wall Bracket as template and drill
4x Ø6x50mm holes in wall (55mm deep) - only 2 holes for SMALL/SMALL+.
4
Attach the Wall Bracket to the wall with the rawl plugs and screws.
*Kriben Air SMALL/SMALL+ models have 2 sets of screws - function as in larger models
en Air SMALL/SMALL+ models have 2 sets of
ø4,5 x 50mm screws*
ø6 x 30mm rawl plugs

1. Unpack the Anchor Plate and the Shelfs carefully.
Do not scratch the parts when handling!
2. Anchor Plate orientation:
Top-handles at the TOP –
Wiring at the BOTTOM.
(The top-handles are on the
back of the Anchor Plate)
3. Unlock the LEFT lock in the
Anchor Plate by sliding the
top-handle UP - and keep it
open by holding it UP.
Assembly of Anchor Plate and Shelfs:
LEFT
4. Make sure Shelf orientation is
with the cut for wiring at the
RIGHT.RIGHT
Wiring cut
Wiring
5

6. Unlock the RIGHT lock in the
Anchor Plate by sliding the
top-handle UP - and keep it
open by holding it UP.
7. Then slide the Shelf ALL THE
WAY into the RIGHT and LEFT
lock.
8. Secure that Shelfs are fully into
the Anchor Plate at both RIGHT
and LEFT.
5. Then slide the LEFT side of the
Shelf HALF-WAY into the LEFT
lock.
IMPORTANT:
Only HALF-WAY in the LEFT
and not at RIGHT. Be carefull -
do not use excessive force!
RIGHT
6

9. Now lock both the LEFT and
RIGHT locks by sliding the
top-handle DOWN.
IMPORTANT:
Be careful - do not use
excessive force!
If resistance, check if the Shelf
is slided all the way into the
Anchor Plate – If not, redo
above procedure and secure
that the Shelf are slided all the
way into the Anchor Plate.
10. Check that the Shelfs are locked
to the Anchor Plate by pulling
the Shelfs outwards.
IMPORTANT:
Make sure the Shelfs are locked.
11. Hang the Anchor Plate with the attached Shelfs on to the Wall Bracket.
We recommend, You screw the Wall Bracket to the wall before assembly
of the Anchor Plate and Shelfs, so the Wall Bracket is ready for the
assembled Kriben Air© Anchor Plate and Shelfs.
All done, ready to use.
RIGHT
LEFT
7

Enjoy Your new
Kriben Air©
We are proud that You have chosen one of our
designer products to be part of Your home
Kriben AS | Energivej 3, DK-4180 Sorø, Denmark | Phone: [phone] |Mail: [e-mail] |Web: www.kriben.dk
Max load 10kg per Shelf