KRUGER MOON Le Franschhoek 2100 User manual

R
a
n
g
e
I t em
Dimen sio n
:
LE FRANSCHHOEK
: 2.1m DINING TABLE
: 1100mmx2100mm x780mmH
Assembly Instructions

R
a
n
g
e
I t em
Dimen sio n
:
LE FRANSCHHOEK
: 2.1m DINING TABLE
: 1100mmx2100mmx780mmH
Thank you for purchasing this quality product from Kruger Moon This product
has been designed for easy assembly and constructed for durability Please take
the time to read and follow the assembly instructions carefully
Be sure to check all packing material carefully for small parts which may have
come loose inside the carton during shipment Please separate, identify, and
count all parts and metal hardware Compare with part list to be sure all parts are
present
If hardware is missing or you have difficulty assembling this product, please call
Super Amart 1800 351 084
IMPORTANT NOTE:
- Place all wooden parts on a clean and smooth surface such as a rug or
carpet to avoid the parts from being scratched
- Remove all wrapping material, including staples & packing straps before
you start to assemble
- DO NOT tighten all screws and bolts until completely assembled
- Keep all hardware parts out of reach of children

R
a
n
g
e
I t em
Dimen sio n
:
LE FRANSCHHOEK
: 2.1m DINING TABLE
: 1100mmx2100mmx780mmH
When unpacking, please be careful not to discard any parts with the packaging
Before continuing, please make sure you have the following parts:
Parts List
Item Description Qty
A Top 1
B Legs 4
1 Bolt (M8x70mm) 8
2
Lock washer ( Φ 8 5x Φ 13mm)
8
3
Flat washer ( Φ 8 5x Φ 19mm)
8
4 Allen key (4mm) 1

R
a
n
g
e
I t em
Dimen sio n
:
LE FRANSCHHOEK
: 2.1m DINING TABLE
: 1100mmx2100mmx780mmH
Step 1
Place legs (B) in position as shown below Use bolts (1) and washers (2),(3) to
attach legs, tighten with the Allen key (4)
A

R
a
n
g
e
I t em
Dimen sio n
:
LE FRANSCHHOEK
: 2.1m DINING TABLE
: 1100mmx2100mmx780mmH
Now carefully turn dining table over to the upright position, ensuring this step is carried
out with two strong people at each end of the table Take extra care not to lean the table
on 2 legs as you move the table into its upright position as this may damage the table
Now the job is complete!
STEP 2