KStrong UFZ850100 Operator's manual

UFZ850100
THESE INSTRUCTIONS APPLY TO THE FOLLOWING MODELS:
SUSPENSION INTOLERANCE STRAP
USER INSTRUCTION MANUAL

Put your feet
into the loop
4
Unzip the
pouches fitted
on both sides
of Harness
1
Hold the 2
straps
together
2 3
Connect the straps
with each other
making a loop
with the help of
easy-to-use
buckle
6
Adjust the sit
strap towards
the front to
release pressure
and give a
seating posture
Stand onto the
loop, so that the
thigh strap are
free to move
5
WARNING: These instructions must be carefully read by all individuals who wear or maintain this product, including
those who have any responsibility involving the selection, application, use or repair of this product,. This product will
perform as designed only if it is used and maintained according to the instruction. Otherwise, it could fail to perform
as designed, and persons who rely on this product could sustain serious personal injury.
STEPS TO USE
Avoid the effects of suspension trauma with the use of .
1. Extremely effective, specially designed to help relieve the negative effects of suspension trauma.
2. Compact and light in weight, hence does not hamper the activity of worker while at work.
3. Allows the suspended worker to stand up in his harness to relieve pressure.
4. Easy to attach to the harness with the help of the textile loop and velcro provided.
5. Easy deployment, operation is fool-proof.
suspension intolerance strap
Max user weight - 310 lbs.
suspension intolerance strap
It is recommended that the should be inspected and examined by a competent
person for any damage of failure, if the need arises. The observation should be recorded in the equipment record
table below. In case damage is observed, the suspension trauma strap should be replaced immediately.

INSPECTION
Regular Inspection is recommended prior to using
this with harness. It can be used on numerous
occasions if it has been inspected prior to use and
shows no sign of damage.
MARKING ON PRODUCT
The suspension intolerance strap is marked with :
Identification of the manufacturer
Product code
Month and Year of Manufacture
Batch/Lot No
Serial No.
Material
HOW TO DISPOSE A SUSPENSION
INTOLERANCE STRAP
When the suspension intolerance strap becomes
unfit or in case of any wear and tear, dispose it
immediately.
Follow the following steps for disposal:
Make the three plastic crates namely- Textile,
Metal & Plastic for placing the
respective components of the suspension
intolerance strap.
Spread the suspension intolerance strap on a
table / flat surface.
Inspect the wear & tear present on the suspension intolerance strap.
If any wear and tear is observed, dispose the suspension intolerance strap using
a sharp scissors; first cut the Textile and dismantle the suspension intolerance strap.
Put the Textile, Plastic & Metal components in their respective plastic crates.
LIFESPAN: The estimated product Lifespan is 10 years from the date of first use. The following factors can reduce the
Lifespan of the product: intense use, contact with chemical substances, especially aggressive environments, extreme
temperature exposure, UV exposure, abrasions, cuts, violent impacts, bad use or maintenance.
DISCLAIMER: Prior to use the end user must read and understand the manufacturer's instructions supplied with this
product at the time of shipment and seek training from their employer's trained personnel on the proper usage of the
product. Manufacturer is not liable or responsible for any loss, damage or injury caused or incurred by any person on
grounds of improper usage or installation of this product.
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
Label

EQUIPMENT RECORD
Product:
Model and type/identification
Manufacturer
Year of manufacture
Other relevant information (e.g. Document number)
PERIODIC EXAMINATION AND REPAIR HISTORY
Date
Reason for entry
(periodic examination
or repair)
Defects noted, repair
carried out and other
relevant information
Name and signature
of competent user
Periodic
examination
next due date
Trade name Identification number
Address Tel, fax, email
Purchase date Date first put into use
UKS/UFZ850100/200320/V1
KStrong.com
USA BRAZIL ASIA
Kstrong LLC
150 N. Radnor Chester Road
Suite F200
Radnor, Pennsylvania 19087
United States
Contact number : 1-833-KSTRONG