KT&C ACE-M321 User manual

M112-M321-002
Ultra-High Resolution
COLOR MODULE CAMERA
OPERATION MANUAL
Thank you for choosing our high quality camera.
Before attempting to connect operate this unit, please
read and follow these instructions.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European
countries with separate collection systems)
This marking shown on the product or its literature, indicate that
it should not be disposed with other household wastes at the end
of its working life. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, please separate
this from other types of wastes and recycle it responsibly to promote
the sustainable reuse of material resources.
This product should not be mixed with other commercial wastes
purchased this product, or their local government ofce, for details
of where and how they can take item for environmentally safe
recycling.
Business users should contact their supplier and check the terms
and conditions of the purchase contract.
Household users should contact either the retailer where they for
disposal.
CAUTION
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER(OR BACK). NO USER.
SERVICING TO QUALIFED SERVICE PERSONNEL.
This symbol is intended to alert the user to the presence
of uninsulated "dangerous voltage" within the product's
enclosure that may be of sufcient mangnitude to constitute
a risk of electric shock to persons.
This symbol is intended to alert the user to the presence of
important operating and maintenance(servicing) instruction in
the literature accompanying the appliance.
FEATURES
• 1/3” SONY EXview HAD CCD II
• High Resolution of 700TV Lines
• OSD (5-Port KEY)
• Multi Language
(ENGLISH / JAPANESE / GERMAN / FRENCH /
RUSSIAN / PORTUGUESE / SPANISH / CHINESE)
• 2DNR
• Privacy Zone 4Zones
• Motion Detection 4Zones
• DC IRIS Control (Option)
• Only DC12V
• ATR (Adaptive Tone-curve Reproduction / Digital WDR)
The function provides gradation compensation to improve
the contrast of subjects both low-luminance areas and high
luminance areas exist in the same picture
• IR Optimizer
If,when the night operation mode of the DAY/NIGHT function
is established, the mode is used together with an external
infrared LED light source, excessive front lighting may occur,
resulting in overexposure.
The IR Optimizer function makes it possible to minimize this
overexposure by optimizing the exposure
control during Night operations.
DIMENSIONS
Unit(mm)
CAUTIONS
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions;
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
Note -
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own
expense.”
WARNING -
This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be
required to take adequate measures.
Caution -
Any changes or modications in construction of this devies which
are not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
CAUTION
1. A regulated DC12V 300mA power supply is recommended for use with
this camera for the best picture and the most stable operation.
An unregulated power supply can cause damage to the camera.
When unregulated power supply is applied, product warranty will be
out of subject.
2. It is recommended that the camera is used with a monitor that has a
CCTV quality 75 video impedance level. If your monitor is switched to high
impedance then please adjust accordingly.
3. Do not attempt to disassemble the camera to gain access to the internal
componets. Refer servicing to your dealer.
4. Never face the camera towards the sun or any bright or reective light,
which may cause smear on the picture and possible damage to the CCD.
5. Do not remove the serial sticker for the warranty service.
- BOARD LENS - - PIN HOLE LENS -
- VARIFOCAL LENS -
CAUTIONS
Signal Format NTSC PAL
Image Device 1/3” 960H SONY EXview HAD CCD II
Scanning
System 2 : 1 Interlace
H.Resolution 750TV Lines
Scanning
Frequency 15.734KHz(H), 59.94Hz(V) 15.625KHz(H), 50Hz(V)
Total Pixels 1020(H) X 508(V) 1020(H) X 596(V)
Effective Pixels 976(H) X 494(V) 976(H) X 582(V)
Electronic
Shutter Speed 1/60~1/100,000sec 1/50~1/100,000sec
S/N Ratio More than 50dB(AGC OFF)
Gamma r =0.45
Min.
Illumination 0.1Lux / F2.0
Sync System Internal
Video Output 1.0 Vp-p Composite 75(Ω) unbalanced
OSD Built in
BLC OFF / BLC / HLC
White
Balance ATW / PUSH / USER1 / USER2 / ANTI CR / MANUAL / PUSH-LOCK
2DNR OFF / ON(Level adjustable)
ATR OFF / ON(Level adjustable)
IR Optimizer OFF / ON(Level adjustable)
Function MIRROR / BRIGHTNESS / CONTRAST /
SHARPNESS/HUE / GAIN
Privacy
Masking 4 Zones
Motion
Detection 4 Zones
Day & Night AUTO / COLOR / BW / EXT1 / EXT2
Lens Vari-focal, Board,
Pinhole, C/CS Mount (DC-IRIS only)
Language ENGLISH / JAPANESE / GERMAN / FRENCH / RUSSIAN /
PORTUGUESE / SPANISH / CHINESE
Input Power
Source DC 12V ±10% Max 100mA
Operating
Temperature 14°F~122°F (-10°C~+50°C)
Storage
Temperature -4°F~140°F (-20°C~+60°C)
Operating
Humidity Less than 80%
Dimension 32mmX32mm
Specications and designs are subject to change for improving
the functionality of this product without notice.
SPECIFICATION
< TOP VIEW >
17.21.2
9.716.2 1.21.2
32
32
28
28
CONNECTION
1) J102(DN_EXT)
PIN NO. NAME I/O
1 +12V O
2 GND -
3 Day&Night SIGNAL I
2) J103(MAIN)
PIN NO. NAME I/O
1 Not used -
2 K_DOWN I
3 K_UP I
4 K_ENTER I
5 K_RIGHT I
6 K_LEFT I
7 GND -
8 VIDEO O
9 GND -
10 +12V I
3) J104(DC IRIS)
PIN NO. NAME I/O
1 DAMP + O
2 DAMP - O
3 DRV + O
4 GND -
J103
1 103 1
1 4
J102
J104

OSD MENU STRUCTURE
MAIN MENU 1st Sub MENU 2nd Sub MENU 3rd Sub MENU 4th Sub MENU
LENS
MANUAL
AUTO
TYPE DC
MODE AUTO,OPEN,CLOSE
SPEED (000 ~ 255)
RETURN
SHUTTER/AGC
AUTO
HIGH
LUMINANCE MODE SHUT,AUTO IRIS,
SHUT+AUTO IRIS
BRIGHTNESS (000 ~ 255)
LOW
LUMINANCE MODE AGC,OFF
BRIGHTNESS x0.25,x0.50,x0.75,x1.00
RETURN
MANUAL
MODE SHUT+AGC
SHUTTER
1/50(PAL),1/100(NTSC)
1/60(NTSC),1/120(PAL)
1/250,1/500,1/1000
1/2000,1/4000,1/10000
AGC 6,12,18,24,30,36,42,44.8
RETURN
WHITE BAL
ATW
SPEED (000 ~ 255)
DELAY CNT (000 ~ 255)
ATW FRAME x0.50,x1.00,x1.50,x2.00
ENVIRONMENT INDOOR,OUTDOOR
RETURN
PUSH
USER1
B-GAIN (000 ~ 255)
R-GAIN (000 ~ 255)
RETURN
USER2
B-GAIN (000 ~ 255)
R-GAIN (000 ~ 255)
RETURN
ANTI CR
MANUAL LEVEL NTSC:(30 ~ 115)
PAL:(28 ~ 134)
RETURN
PUSH LOCK
BACK LIGHT OFF,BLC,HLC
PIC ADJUST
MIRROR OFF,ON
BRIGHTNESS (000 ~ 255)
CONTRAST (000 ~ 255)
SHARPNESS (000 ~ 255)
HUE (000 ~ 255)
GAIN (000 ~ 255)
RETURN
ATR ON
LUMINANCE LOW,MID,HIGH
CONTRAST LOW,MIDLOW,MID,
MIDHIGH,HIGH
RETURN
OFF
MOTION DET ON
DETECT SENS (000 ~ 127)
BLOCK DISP OFF,ON,ENABLE
(CONTROLER)
MONITOR AREA ON,OFF
AREA SEL
1/4, 2/4, 3/4, 4/4
TOP NTSC:(000 ~ 244)
PAL:(000 ~ 288)
BOTTOM NTSC:(000 ~ 244)
PAL:(000 ~ 288)
LEFT NTSC:(000 ~ 474)
PAL:(000 ~ 468)
RIGHT NTSC:(000 ~ 474)
PAL:(000 ~ 468)
RETURN
OFF
NEXT
EXIT
SAVE ALL
*SHUT+IRIS: Both the Shutter and the Mechanical Iris are automatically adjusted according to brightness.
*Auto Iirs(Default):
The Shutter stays at the manually selected value and only the Mechanical Iris adjusts brightness.
MAIN MENU 1st Sub MENU 2nd Sub MENU 3rd Sub MENU 4th Sub MENU
PRIVACY ON
AREA SEL
1/4, 2/4, 3/4, 4/4
TOP NTSC:(000 ~ 244)
PAL:(000 ~ 288)
BOTTOM NTSC:(000 ~ 244)
PAL:(000 ~ 288)
LEFT NTSC:(000 ~ 474)
PAL:(000 ~ 468)
RIGHT NTSC:(000 ~ 474)
PAL:(000 ~ 468)
COLOR (1 ~ 8)
TRANSP 0.00, 0.50, 0.75, 1.00
MOSAIC OFF,ON
RETURN
OFF
DAY/NIGHT
AUTO
BURST OFF,ON
DELAY CNT 0 ~ 255
DAY -> NIGHT 0 ~ 255
NIGHT -> DAY 0 ~ 255
RETURN
COLOR
BW
BURST OFF,ON
IR OPTMIZER OFF,ON
MODE AUTO, CENTER
LEVEL 0 ~ 31
RETURN
EXT1
EXT2
NR
NR MODE OFF,Y,C,Y/C
Y LEVEL (000 ~ 015)
C LEVEL (000 ~ 015)
RETURN
CAMERA ID ON EDIT MODE
RETURN
OFF
LANGUAGE ENGLISH / 日本語 / DEUTSCH / FRANCAIS / Русский / PORTUGUÊS / ESPAÑOL / 中文
CAMERA
RESET
BACK
EXIT
SAVE ALL
*Important Note :
- Any changes made to the camera settings must be saved prior to exiting the OSD menu.
Else all changes will be discarded.
- By changing the lens option in the OSD from MANUAL to AUTO will automatically change the
SHUTTER/AGC setting from AUTO IRIS to SHUT+AUTO IRIS.(Default:AUTO IRIS)