KTI Networks KGD-600 User manual

Product Highlights :
 Panel/Din-rail/Wall mountable
 Wide operating temperature range
 In-band management
 Optional Fiber connectivity
 802.1Q Tagged VLAN support
 QoS WFQ support
 802.1x authentication
 Compact design
Specifications :
Industrial Managed 6-Port Gigabit Ethernet
Switch with 1 mini-GBIC Port
Key Features :
 Provides 5 10/100/1000Mbps Gigabit Ethernet ports and 1 mini-GBIC port
 Provides in-band web-based management interface
 All copper ports support auto-negotiation and auto-MDI/MDI-X detection
 Supports 802.3x flow control for full-duplex and backpressure for half-duplex
 Provides port status, statistic monitoring and control function
 Provides full wire speed forwarding
 Supports port-based and 802.1Q Tag-based VLAN
 Provides QoS function
 Provies 802.1x authentication
 Supports configuration backup and upload
 Provides port mirroring function
 Provides redundant ring function
 Industrial-rated emission and immunity performance
Standard IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.1Q
Network Ports 5 10/100/1000Mbps Gigabit copper ports
Shielded RJ-45, auto-negotiation, auto-MDI/MDI-X support
1 1000Mbps mini-GBIC SFP port
SFP supports standard SFP fiber transceiver installation
Network Cables 10/100Mbps : Cat.5 up to 100m, 1000Mbps : Cat.5e or higher up to 100m
MAC Address Table 8K entries
Buffer Memory 112KB
VLAN Port based VLAN, 8021Q Tag-based VLAN
Port Link Aggregation Trunking groups : 2 max., Ports/group : 2
QoS 4 priority queues, Classification : Port-based, 802.1p, IP DSCP
LED Indication Display on both top and front panels
Per unit : power
Per copper port : 1000M, 100M,10M speed/link/activity status
SFP port : 1000M speed/link/activity status, Optical link status
Management Support Web browser software, management VLAN ID
Management Objects System settings, port status/statistics, port control, VLAN, QoS,
802.1x, port mirroring, Firmware upgrade
7DC Power Input Screwed Terminal Block : +5VDC~+30VDC
DC IN Jack -D6.3mm/+D2.0mm, external power adapter rating +7.5V/1A
Power Consumption 3.6W max. @ +7.5V input
KGD-600
Top LED Display
Panel Mounting
Din-Rail Mounting
080110

FCC Part 15'Class B
CISPR 22 Class B
Katron Technologies Inc.
15F-7, No. 79, Sec. 1, Hsin Tai Wu Rd.,
Hsi-chih, Taipei Hsien, Taiwan.
Te l :886-2-2698-3878
Fax:[phone]
E-mail:[email protected]
URL:http://www.ktinet.com.tw
KTI Networks Inc.
7400 Harwin Dr., Suite 120 Houston,
Texas 77036 U.S.A.
Te l :713-266-3891
Fax:[phone]
E-mail:[email protected]
URL:http://www.ktinet.com
Trademarks: All brand names are trademarks or registered
trademarks of their respective holders.
This information is subject to change without prior notice.
Power Terminal Block
EMI EMS Safety Environmental Tests:
Specifications
Class B
Class B
< 75 W
Clause 5
Contact:+/-8KV
Air:+/-16KV
+/-4KV
Power:4KV
Strength:10V/m
Test
FCC/EMI
CE/EMC/EMI
CE/EMC/Harmonic
CE/EMC/VFF
CE/EMC/EMS
ESD Test
RS Test
EFT/BURST
Surge Immunity
Standard
FCC Rule Part 15
EN55022, CISPR 22
EN 61000-3-2
EN 61000-3-3
EN 55024
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
Level 3
50Hz 40A/m
Interruption : C
Dips : B
TP, 1500VAC/60sec.
TP, 500VDC/10Mohm
-20OC, 96hrs
+74OC 40%RH 96hrs
+60OC 90%RH 96hrs
5~30Hz, 0.5g
Operating
CS Test
Magnetic Field Imm.
Voltage Dips Imm.
Safety
Dielectric Voltage
Insulation Resistance
Cold Test
Dry Heat Test
Damp Heat Test
Storage Test
Vibration Test
NEMA TS2
Vibration test
NEMA TS2-2003
Proc, 2.2.8.3~4
5~30Hz, 0.5g
xYz, 1hr/axis
NEMA TS2
Shock test
NEMA TS2-2003
Proc, 2.2.9
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
EN 60950, IEC 60950
IEEE 802.3
IEEE 802.3
IEC 68-2-1 Test Ad
IEC 68-2-2 Test Bd
IEC 68-2-3
IEC 68-2-48
IEC 68-2-34
+85OC 40%RH 96hrs
-20OC 96hrs
Haif-sine pulse
10g, 11ms, +xYz
-
NEMA TS2
Environment test
NEMA TS2-2003
Proc, 2.2.7.3~6
Temp: -34~+74OC
Humid: 0%~90%
Power: +5V~+30V
Fiber Optical Specifications :
Model Connector Fiber Wavelength Tx Power Rx Sensitivity Rx Max. Distance
-SX LC 62.5/125 MMF 850nm -9.5~-4dBm -18dBm -1dBm 200m
50/125 MMF 500m
-LX LC MMF 1310nm -9.5~-3dBm -20dBm -3dBm 550m
SMF 10km
-LX20 LC SMF 1310nm -7~0dBm -24dBm -3dBm 20km
Dimension 144 x 104.5 x 26 mm (WxDxH)
Housing Enclosed metal with no fan
Mounting Support Screw Panel mounting, Din-rail mounting, Wall / desktop mounting
Environment Operating temperature : -20OC ~+74OC
Storage temperature : -20OC ~85OC
Humidity : 10%~90%non-condensing
Approval FCC Class B certificate
CE mark /EMC Class B certificate
EN60950 /IEC60950-1 safety
NEMA TS2-2003 Environment tests
Dimension : Panel Mounting
Dimension : Din-Rail Mounting
080110