M-I-7
KX61-3, KX71-3 WSM-M General
f. Machine specifications
Note:Kubota Japan Bucket
Unit KX61-3 EU KX71-3 EU KX71-3 PP
Engine
Type Vertical, water-cooled 4 cycle, 4 cylinders diesel
Model V1505-E2-BH-9-EU V1505-E2-BH-10-EU V1505-E2-BH-10
Output power (ISO 3406m Gross) kW
PS
18.3 kW/2100rpm
24.9 PS/2100rpm
20.6 kW/2300rpm
28.0 PS/2300rpm
←
(SAE-J1349)
Displacement cc 1498 1498 ←
Dimensions
Overall length STD/Long mm (in) 4270 / 4310 4520 / 4550 4550 (179.1)
Overall width mm (in) 1400 1500 ←(59.1)
Overall crawler width mm (in) 1400 1500 ←(59.1)
Overall height Canopy mm (in) 2430 2430 ←(95.7)
Cabin mm (in) 2410 2410 ←(94.9
Min. ground clearance mm (in) 305 ←←(12.0)
Max. digging depth STD. Arm mm (in) 2490 2680 —
Long Arm mm (in) 2740 2870 2970 (116.9)
Max. digging height STD. Arm mm (in) 4360 4470 —
Long Arm mm (in) 4540 4600 4700 (185.0)
Max. digging radius STD. Arm mm (in) 4480 4700 —
Long Arm mm (in) 4720 4890 4990 (196.5)
Max. dumping height STD. Arm mm (in) 3060 3170 —
Long Arm mm (in) 3240 3300 3180 (125.2)
Swing angle (left/right) deg 78 / 57 ←←
Travel speed Low speed R/I km/h (m/h) 2.8 / 2.7 2.7 / 2.6 2.6 (1.6) / 2.6 (1.6)
High speed R/I km/h (m/h) 4.4 / 4.3 4.6 / 4.5 4.5 (2.8) / 4.4 (2.7)
Swing speed rpm 9.5 9.4 ←
Max. traction force Low speed kN
(kgf)
lbw
20.2
(2060)
22.3
(2275)
22.1
(2250)
4960
High speed kN
(kgf)
lbw
11.7
(1193)
14.6
(1490)
11.1
(1130)
2491
Performance
Tumbler distance mm (in) 1560 ←←(61.4)
Tread mm (in) 1100 1200 ← (47.2)
Crawler width × No. of shoe × pitch Rubber mm (in) 300 × 53 × 80 ←←
Bucket
Capacity CECE heaped m3(yd3)0.06 0.07 0.08 (0.06)
Width mm (in) 450 480 450 (17.7)
Dozer
Width × height mm (in) 1400 × 300 1500 × 300 ← (59.1 × 11.8)
Lift above GL / below GL mm (in) 350 × 310 370 × 350 340 × 300 (13.4 × 12.2)
