Kuchef GTM-8305B User manual
MODEL: GTM-8305B PRODUCT CODE: 52064 12/2015
N13275
Model Number GTM-8305B
1.5L Blender
AFTER SALES SUPPORT
1300 886 649
AUS
INSTRUCTION MANUAL
IM Version No: V1.1 Issue Date: 10 September 2015
MODEL: GTM-8305B PRODUCT CODE: 52064 12/2015
2
Welcome
Congratulations on choosing to buy a Kuchef®product.
All products brought to you by Kuchef®are manufactured to the highest
standards of performance and safety and, as part of our philosophy of
customer service and satisfaction, are backed by our comprehensive
3Year Warranty.
We hope you will enjoy using your purchase for many years to come.
MODEL: GTM-8305B PRODUCT CODE: 52064 12/2015
3
Contents
02 Welcome
04 Warranty Details
05 General Safety Instructions
07 Product Overview
08 Getting Started
12 Instructions
14 FAQs and Troubleshooting Guide
15 Other Useful Information
18 Recipes
23 Repair and Refurbished Goods or Parts Notice
MODEL: GTM-8305B PRODUCT CODE: 52064 12/2015
4
The product is guaranteed to be free from defects in workmanship and parts
for a period of 36 months from the date of purchase. Defects that occur
within this warranty period, under normal use and care, will be repaired,
replaced or refunded at our discretion, solely at our option with no charge for
parts and labour. The benefits conferred by this warranty are in addition
to all rights and remedies in respect of the product that the consumer
has under the Competition and Consumer Act 2010 and similar state and
territory laws.
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for
a major failure and to compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.
Warranty Details
YEAR WARRANTY
3
1.5L Blender
MODEL: GTM-8305B PRODUCT CODE: 52064 12/2015
5
General Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Read this manual thoroughly before first use, even if you are familiar with this type
of product. The safety precautions enclosed herein reduce the risk of re, electric
shock and injury when correctly adhered to. Keep the manual in a safe place for
future reference, along with the completed warranty card, purchase receipt and
carton. If applicable, pass these instructions on to the next owner of the appliance.
Always follow basic safety precautions and accident prevention measures when
using an electrical appliance, including the following:
Electrical Safety and Cord Handling
• Correct voltage: Make sure your local outlet voltage and frequency correspond
to the voltage indicated on the appliance rating label. If it does not match,
contact the after sales support line and do not use the appliance.
• Safe connection: Insert the plug rmly into the mains socket. Do not alter the plug.
• Do not immerse: To protect against electric shock, do not immerse the cord,
plug or the motor base in water or other liquid. Only clean these parts with a
damp cloth, never wash them in water. If the appliance is accidentally immersed,
immediately unplug it, dry it and have it checked by qualied service personnel.
• Moisture: Do not leave the blender in the rain or exposed to moisture or exces-
sive humidity. Ensure your hands are dry before handling the plug or switching on.
• Protect the power cord: Do not kink, squash or strain the power cord and
protect it from sharp edges and heat. Do not let it hang over the edge of a
benchtop; do not place anything on top of the cord. Do not wrap it around the
appliance, and never pull the cord to lift up, carry or unplug the appliance.
• No extension cord: Do not use this appliance with an extension cord.
• Damaged power cord: Check the power cord regularly for visible damage. If
it is damaged, it must be replaced by the manufacturer, its authorised service
centres or similar qualified personnel in order to avoid any hazards.
• Do not use when damaged: Do not pick up or operate an appliance with
a damaged cord or plug, or after it malfunctions or has been dropped or
damaged. In case of damage, contact our after sales support line for advice.
• Disconnect: Switch off the appliance and unplug it from the power supply:
• If anything unusual occurs during operation.
• Before assembly, and before adding or removing parts, and before
approaching parts that move in use.
• After use, and before cleaning, servicing or moving the machine.
To disconnect, turn the control to the [ 0 ] position and unplug the machine from
the wall outlet. Grip the plug, do not pull the cord when disconnecting.
MODEL: GTM-8305B PRODUCT CODE: 52064 12/2015
6
General Safety Instructions (Cont.)
• RCD: Unless your home is already fitted with a residual current device (safety
switch), we recommend installing an RCD with a rated residual operating
current not exceeding 30mA to provide additional safety protection when
using electrical appliances. See your electrician for professional advice.
Usage Conditions and Restrictions
• Domestic use only: This appliance is suitable for indoor domestic use only.
It is not suitable for commercial or outdoor use.
• Intended purpose: This appliance is intended for processing domestic
quantities of food. Do not use it for anything other than its intended purpose,
and only use it as described in this manual. Any other use may be hazardous
and may result in personal injury.
• Accessories: Only use this appliance with the accessories supplied; do not
use it with any other accessories. The use of accessories not recommended
in this manual may cause fire, electric shock and/or personal injury.
• Usage restriction: The appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or lack of expe-
rience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety.
• Children: Supervise children to ensure they do not play with the appliance.
Close supervision is necessary when any appliance is used by or near children.
• Unattended: Never leave the appliance unattended when it is connected to
the power supply. Disconnect it from the power supply when you are finished
with it or when leaving the room.
• Work surface: To ensure safe and efficient operation, place the appliance on
a flat, stable surface, in a dry environment, close to a power point and away
from water and sources of heat.
• Protect from heat: Do not place the appliance near any open flame, hot
surface, radiant cooking elements or other source of heat.
• Do not use while empty: Never operate the blender without any food inside.
• Hot liquids: Do not use to blend hot liquid as it can be ejected out of the jug
due to steam development.
• Repair: This appliance contains no user-serviceable parts inside. Do not
attempt to open or repair the motor base yourself. Repairs are only to be
carried out by a qualified technician.
• WARNING! Improper assembly and misuse of the appliance can result in
severe injury and damage to the product. We assume no responsibility for
any eventual damages caused by misuse of the product or noncompliance
with the instructions.
MODEL: GTM-8305B PRODUCT CODE: 52064 12/2015
7
Product Overview
Scope of Delivery
A Blender
1 Lid cap (hole cover)
2 Lid
3 Glass jug
4 Cutting blade, 6-piece
5 Sealing ring
6 Jug base
7 Jug assembly
8 Ice-crushing button
9 Rotary speed control
10 Motor base
B Other inclusions (not shown):
Instruction manual
Quick start guide
Warranty card
8
9
10
7
1
2
3
4
5
6
MODEL: GTM-8305B PRODUCT CODE: 52064 12/2015
8
Getting Started
Before First Use
• This product has been packaged to protect it against transportation damage.
Unpack the appliance and keep the original packaging carton and materials
in a safe place. It will help prevent any damage if the product needs to be
transported in the future, and you can use it to store the appliance when it
is not in use. In the event the carton is to be disposed of, please recycle all
packaging materials where possible.
• Plastic wrapping can be a suffocation hazard for babies and young children, so
ensure all packaging materials are out of their reach and disposed of safely.
• Inspect all parts of the appliance for visual damage. Unwind the power cord
to its full length and inspect the cord and plug for damage. Do not use the
appliance if the appliance or its cord have been damaged or are not working
properly. In case of damage, contact our after sales support line for advice.
• Make sure you have read and understood all instructions and warnings in
this manual. Refer to the Product Overview on page 7 to familiarise yourself
with the product and identify all parts. Pay particular attention to the safety
instructions on the previous pages.
• Wash all parts that come into contact with food with a soft cloth or sponge
in warm water and mild detergent to remove any dust from transport or the
manufacturing process. Rinse and dry thoroughly. Wipe the motor base with a
damp cloth.
CAUTION: The blades are sharp: handle with care to avoid injury.
CAUTION: Never immerse the motor base in water for cleaning.
CAUTION!
• Handle the blender with extreme care, especially when assembling and
cleaning the appliance. The cutting blades are very sharp.
• Before switching on the appliance, make sure that all parts are properly
assembled and the lid is closed.
• Do not touch moving parts during operation. Keep hands, hair, clothing
and utensils away from the cutting blades during use to reduce the risk of
severe injury to persons or damage to the appliance. Switch off the appliance
and wait until the blades have stopped moving before opening the lid or
approaching parts that move during use. Do not move the appliance while it
is in use.
• To avoid personal injury or material damage, never try to defeat the safety
switch. The appliance will only operate with the blender jug properly placed
on the motor base.
MODEL: GTM-8305B PRODUCT CODE: 52064 12/2015
9
• Insert the lid cap into the pouring hole of the lid, aligning the lugs on the cap
with the notches in the lid hole. Then turn the cap clockwise to lock (Fig. 4).
Fig. 2 Fig. 3
Fig. 4
Assembling the Glass Jug
The blade assembly comes attached to the jug base. It consists of the cutting
blade, sealing ring and jug base. After use and cleaning, reassemble it as follows:
• Put the sealing ring on the inner edge of the blade assembly (Fig. 1a), then place
the blade assembly with sealing ring into the blender jug base (Fig. 1b).
• Mount the glass jug onto the jug base (Fig. 2) and turn the base clockwise until it
is securely in place (Fig. 3).
Getting Started (Cont.)
Fig. 1a
Fig. 1b
MODEL: GTM-8305B PRODUCT CODE: 52064 12/2015
Fig. 6
10
Getting Started (Cont.)
Assembling the Blender Unit
• Ensure that the appliance is disconnected from the mains power supply and
switched off: the Rotary Speed Control should be set to the OFF [ 0 ] position.
• Place the jug assembly into position on the motor base and press down until
securely engaged (Fig. 6).
• Your blender is now ready to use.
• After you have added your ingredients to the glass jug, secure the lid onto the
glass jug and press down (Fig. 5).
Fig. 5 NOTE
Press the lid
down firmly
to secure.
Do not use
the blender
without
the lid and
hole cover
properly in
place.
MODEL: GTM-8305B PRODUCT CODE: 52064 12/2015
11
Operating Modes
Getting Started (Cont.)
Fig. 7
Rotary Speed Control
Dial Position Action
ICE Crushing ice with short, powerful pulse action
[ P ] PULSE
Blending foods with short, powerful pulse action, or cleaning
the glass jug after use.
NOTE: The rotary speed control does not stay in this setting,
you have to keep turning it to, or hold it in the [ P ]
setting for repeated pulsing action.
[ 0 ] OFF Stop operation
[ 1 – 2 ] LOW Light blending of liquid foods
[ 3 – 5 ] HIGH Blending/mixing of liquid and solid foods to a smooth
consistency
MODEL: GTM-8305B PRODUCT CODE: 52064 12/2015
12
Instructions
Using the Blender
Preparation
• Place the jug assembly into position on the motor base and press down until
securely engaged (see Fig. 6 on page 10).
• Place the food you wish to blend into the blender jug, making sure you do not
overfill the jug. Always leave enough room at the top for the mixture to swirl
around.
• Place the lid on top of the blender jug and ensure it is properly in place. The lid
cap should securely cover the pouring hole in the lid.
• Before connecting the appliance to the power supply, make sure the Rotary
Speed Control is set to the OFF [ 0 ] position (see Fig. 7, page 11).
• When the appliance is plugged in, the backlit Rotary Speed Control will
illuminate.
Operation
• Place one hand on top of the blender lid and with the other hand select your
desired blending speed and start blending.
* Turn clockwise to select blending speed 1 – 5.Always start with a slow
speed and increase as necessary.
* Turn anticlockwise to the Pulse [ P ] setting for pulsing action.
* Press the ICE button for ice crushing.
• After your ingredients are properly blended, turn the Rotary Speed Control back
to the OFF [ 0 ] position and unplug the appliance from the power point.
• Wait until the blades no longer move before removing the blender jug. Simply lift
it off the motor base. No rotation is required.
Adding Ingredients
• To add ingredients to the jug during operation, stop operation and remove the
lid cap from the lid. Turn the cap anticlockwise and take it out.
• Add additional ingredients through the pouring hole in the lid, then replace the
lid cap and resume operation.
CAUTION!
Do not use the blender for more than one minute at any one time.
For longer blending tasks, allow the motor to rest for three minutes before
another one minute operation to prevent overheating and consequent damage.
MODEL: GTM-8305B PRODUCT CODE: 52064 12/2015
13
Instructions (Cont.)
For Best Results
• For best blending of solid and liquid ingredients, pour the liquid into the jug
first, then add the solids. If required, gradually add more liquid through the
pouring hole in the lid.
• Cut larger ingredients into smaller (2-3cm) pieces before adding them into the
blender jug.
• To prepare fruit smoothies using fresh fruit, peel, core and then cut the fruit
into pieces.
• Ensure all fruit juices are chilled before blending to keep drinks cold for longer.
• Freeze fresh fruit when it is in season to ensure you always have fruit on hand
and ready to blend for smoothies. Peel and chop fruit as necessary before
freezing. Frozen bananas make smoothies extra creamy.
• When making cocktails or other drinks with more than 6 ice cubes, use the
ICE button to ensure the ice is properly crushed.
• When using ice-cream for thick shakes, take it out of the freezer 5–10 minutes
before blending, and add it to the blender jug in small chunks.
• To achieve the best results when pureeing solid ingredients, place small
portions into the glass jug one by one instead of adding all ingredients at once.
Depending on the type of fruit or vegetable, you may have to add a little liquid
for a creamier consistency.
• For blending solid or very thick liquid ingredients we recommend using the
blender on the Pulse [ P ] setting in short bursts to prevent the blades from
becoming stuck.
CAUTION!
• Handle the blender with care, the cutting blades are very sharp.
• Always place your hand on top of the blender assembly when you are
operating the appliance.
• Do not process hot liquids in the jug.
• Do not overfill the blending jug, always allow some room for the blended
ingredients to swirl around in the jug.
MODEL: GTM-8305B PRODUCT CODE: 52064 12/2015
14
FAQs and Troubleshooting Guide
Can I use the blender without the lid cap inside the lid?
No, the cap is part of the lid and must be in place for processing, otherwise you
risk food spilling out of the jug during processing. Remove the lid cap to add
ingredients, but make sure to replace it again for processing.
Blended food is leaking out of the glass jug. What has gone wrong?
If liquid is leaking out of the base of the jug, check and ensure that the jug
assembly is properly put together. The sealing ring should sit firmly on the inner
edge of the blade assembly, and the glass jug mounted securely on the jug base –
see page 9 for assembly instructions.
If food is leaking from the top of the jug, it may be overfilled. Always leave room in
the jug for processing. Also ensure the lid and lid cap are securely in place.
Does the glass jug come apart for cleaning?
Yes, the jug base and blade assembly can be removed for easy cleaning. Follow
the assembly instructions on page 9 in reverse order. Handle with care, the blades
are very sharp. Alternatively, let the machine run briefly for quick cleaning with a
little water and detergent, as described on the opposite page.
When should I use the Pulse function?
The Pulse function is useful for blending thicker or more solid ingredients, as
blending in short bursts prevents the blades from becoming stuck. It is also
recommended for blending ingredients which you do not want to overprocess but
retain a coarser consistency.
What is the best way to puree cooked vegetables for baby food?
For pureeing, feed small portions into the glass jug one by one instead of adding all
ingredients at once. Do not blend hot liquids; cooked vegetables should be cooled
to room temperature before processing. Depending on the type of vegetable, you
may have to add a little liquid for a creamier consistency.
Can I crush ice in the blender?
Yes, the blades are strong enough to crush ice. With the motor switched off, add
ice cubes to the blender, replace the lid and then press the ice-crushing button
repeatedly to process.
Can I blend soup in the blender?
No, always let liquids cool to room temperature before processing. Processing hot
liquids may result in steam creation and expulsion of hot liquid, which could cause
injury.
MODEL: GTM-8305B PRODUCT CODE: 52064 12/2015
15
Cleaning and Care
Always wash soiled parts immediately after use for easier cleaning. Do not let
food dry in the blender jug, as this will make cleaning more difficult.
Other Useful Information
IMPORTANT!
• Do not immerse! Never immerse the motor base of the blender in water or
other liquid. Never wash it under running water. Only wipe the motor base
with a well wrung out, damp cloth.
• What NOT to use for cleaning: Do not use alkaline, harsh chemical or
alcohol based cleansers for cleaning any part of the appliance. Do not use
abrasive cleaners, scouring pads or hard brushes.
NOTE
The jug, lid and lid cap may also be washed in a dishwasher.
Cleaning the Jug and Blade Assembly
• After use, take the jug off the base and remove all food.
CAUTION: Take care to avoid injury, the blades are very sharp!
• For quick cleaning of the blending jug after use, pour a little warm,
soapy water into the jug and attach the lid. Turn the Rotary Speed Control
anticlockwise to the Pulse [ P ] setting and hold for a few seconds, then empty
the jug, rinse and let it air dry.
• For thorough cleaning of the blender, make sure the Rotary Speed Control is
set to the OFF [ 0 ] position and the motor base is unplugged from the power
supply. Grip the plug, do not pull the cord when unplugging.
• Dismantle all detachable parts: unscrew the blender jug base from the jug
assembly, take out the blade assembly, remove the cover for the pouring
hole and the lid.
• Rinse the cover, lid and the blender jug in warm, soapy water (or wash in
the dishwasher), then let all parts dry thoroughly.
• Brush the blade clean with warm, soapy water and rinse under the tap.
CAUTION: Do not touch the sharp blades, handle with care. Leave the
blade assembly to dry upside down, away from children
Cleaning the Motor Base
• Wipe the motor base only with a damp cloth and dry thoroughly. Remove any
stubborn spots by rubbing with a damp cloth and non-abrasive cleaner.
MODEL: GTM-8305B PRODUCT CODE: 52064 12/2015
16
Other Useful Information (Cont.)
Storage
Store the clean and dry appliance, and all its parts, in the original carton, which will
protect it from dust. Store it in a clean and dry place, unplugged from the power
supply and out of children's reach. Do not wrap the cord around the appliance
during storage.
Service and Repair
The unit has no user-serviceable parts contained within. Do not attempt to repair,
disassemble or modify the appliance. If the appliance requires repair or service,
contact our after sales support centre for advice.
Spare Parts
Our after sales support centre stocks the following spare parts for the appliance.
• Blade assembly
• Glass jug
• Jug base
• Lid
• Lid cap (hole cover)
• Sealing ring
MODEL: GTM-8305B PRODUCT CODE: 52064 12/2015
17
Responsible Disposal
At the end of its working life, do not throw this appliance out with your household
rubbish. Electrical and electronic products contain substances that can have
a detrimental effect on the environment and human health if disposed of
inappropriately. Observe any local regulations regarding the disposal of electrical
consumer goods and dispose of it appropriately for recycling. Contact your local
authorities for advice on recycling facilities in your area.
Technical Specifications
Power Consumption 600W max.
Rated Voltage 220-240VAC 50Hz
Blender Jug Glass, 1.5L capacity
Speed Settings
5 Speeds
Pulse setting
Ice-crushing button
Rotary Speed Control Illuminated
Blade Assembly Detachable, consisting of 6 stainless
steel blades
Power Cord 1m
Dimensions (mm) 394 (H) x 180 (W) x 175 (D)
Weight (all parts) approx. 3.2kg
Dishwasher Safe Blender jug, lid, lid cap
Other Useful Information (Cont.)
MODEL: GTM-8305B PRODUCT CODE: 52064 12/2015
18
Recipes
Smoothies, Shakes and Cocktails
Peach Smoothie
Ingredients
2 Peaches, stoned and cut into small pieces
1 Banana, thickly sliced
150g Yoghurt, plain
1tbsp Honey
1½ cups Orange juice, freshly squeezed
½ cup Mint leaves (optional)
Method
• Place the peach, banana, yoghurt, honey and juice into the blender jug, cover
and blend until smooth.
• Serve in a chilled glass and garnish with fresh mint leaves.
Strawberry Smoothie
Ingredients
250g Strawberries, hulled and washed (or 200g frozen strawberries)
180g Yoghurt, plain
250mL Milk
1tbsp Honey
Method
• Place all ingredients into the blender jug, cover and blend until smooth.
• If the consistency is too thick, you can add a little extra milk or water and blend
until the desired consistency is reached. Serve in a chilled glass.
Tropical Smoothie
Ingredients
1 Banana, peeled and chopped
½ cup Milk
½ cup Lychees, peeled
1 tbsp Honey
½ cup Yoghurt, plain
Method
• Place banana, lychees, yoghurt, milk and honey into the blender jug, cover and
blend.
• Serve in a chilled glass.
MODEL: GTM-8305B PRODUCT CODE: 52064 12/2015
19
Recipes (Cont.)
Vanilla Lime Smoothie
Ingredients
½ cup Yoghurt, plain
5-6 Ice cubes
½ cup Milk
1 tsp Vanilla extract
Contents of ½ Vanilla bean
½ Lime, freshly juiced
1/4 tsp Lime zest (and some more for garnish)
Protein powder (optional)
Method
• Add all ingredients to the blender jug, cover and blend until smooth.
• Serve in a tall glass, topped with lime zest and garnished with a wedge of lime.
Pineapple Smoothie
Ingredients
65–130g Pineapple, peeled and diced (if unavailable, use tinned)
½ cup Yoghurt, plain
½ cup Water
2 tbsp Sugar (or adjust the quantity according to your taste)
10 Ice cubes
Method
• Place all ingredients into the blender jug, cover and blend using the ICE button
until sufficiently processed for drinking.
• Serve in a chilled glass.
Berry & Banana Smoothie
Ingredients
½ cup Mixed berries, fresh or frozen
1 Banana, peeled and chopped
1 cup Milk
5 Ice cubes
Method
• Place all ingredients into the blender jug, cover and blend until smooth using
the ICE button.
• Serve in a chilled glass.
MODEL: GTM-8305B PRODUCT CODE: 52064 12/2015
20
Recipes (Cont.)
Lemon & Lime Slushy
Ingredients
4 Lemons, juiced
4 Limes, juiced
1 cup Sugar syrup (see opposite)
1 cup Ice cubes
Method
• Place all ingredients into the blender jug, cover and blend using ICE button.
• Serve with a straw in chilled glasses.
Watermelon and Mint Frappé
Ingredients
6 Ice cubes
1/3 cup Mint leaves
500g Watermelon pieces
Extra mint leaves, to garnish
Method
• Place all ingredients into the blender jug, cover and blend using the ICE button.
• Serve immediately in chilled glasses and garnish with extra mint leaves.
Traditional Milkshake
Ingredients (makes approx. 1L)
500mL Milk
180g Vanilla ice-cream, in small scoops or chunks
2 tsp Vanilla extract
Method
• Place all ingredients into the blender jug, cover and blend until smooth.
• Serve with a straw in chilled glasses.
• As a variation, replace the vanilla extract with chocolate or strawberry topping
and the vanilla ice-cream with chocolate or strawberry ice-cream.
Table of contents
Other Kuchef Blender manuals
