Kuppersbusch EKI 307.0 User manual

BEDIENUNGSANWEISUNG
mit Montageanweisungen
Instructions for use and installation instructions
Instructions d’utilisation et avis de montage
Gebruiksaanwijzing en montagehandleiding
Istruzioni di uso e di montaggio
Instrucciones de uso y de montaje
Instruções de uso e de montagem
Ðtv³wuÒ xvÒvÒ ÊËw Ò´ÎËxÑÐÌгvÒvÒ
EKI 307.0
223521 K81

EKI 307 13
For your information...
Please read the instructi ns in this b klet carefully as it c ntains imp rtant
inf rmati n c ncerning the safety, the installati n, the use and the
maintenance f y ur appliance.
The appliance sh uld nly be used f r c king in the h useh ld.
Keep the perati n instructi ns in a safe place.
Notes on disposal
Disposing of the packaging
The transp rt packaging c nsists f the f ll wing materials: C rrugated
cardb ard, cardb ard, styr f am (CFC-free), P lyethylen-f il.
D n t put these materials in the h useh ld rubbish, but ask y ur l cal
auth rity t give y u the adress f the m st c nvenient c llecti n p int.
What to do if you happen to have an old appliance
Old appliances c ntain many materials which can be recycled. F r this reas n
y u sh uld n t simply put y ur ld appliance n the rubbish tip, but ask y ur
l cal auth rity h w it might be recycled.
Conditions of guarantee
The c nditi ns f guarantee applicable f r this pr duct are subject t th se
published by the representative in the relevant c untry. Details regarding same
may be btained fr m the dealer fr m wh m the appliance was purchased.
F r claims under guarantee the sales receipt must be pr duced.
Contents
Your appliance at a glance . . . . . . . . . . . . . . . . . . . . . . . 14
The operation panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
C nnecti n and perati n
The h b
Before using the appliance for the first time . . . . . . . . . . . 15
The hob . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Advantages f the inducti n h b
S me instructi ns n c kware
Use of the cooking zones . . . . . . . . . . . . . . . . . . . . . . . . 16
Switching n the h b
Switching the c king z ne n and ff;
Changing the c king setting
Aut matic initial c king
The p wer functi n
Residual heat indicat rs
The p t rec gniti n
Switching the h b ff (rapid cut- ut)
Sens r-l ck (child-pr f l ck)
Time limit functi n (h liday functi n)
Other functi ns
N tes n use
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
What to do if trouble occurs . . . . . . . . . . . . . . . . . . . . . . 19
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
N te
N tes f r fitting
Installati n f the c king surface
Installati n f the h b
Electrical c nnecti n

14 EKI 307
Your appliance at a glance
The operation panel
1C king z nes
∅ 210 mm, 2200 / 3000* Watt
∅ 145 mm, 1400 / 600* Watt
(*using the p wer functi n)
2Sens r switch f r h b
3Sens r keys f r c king z nes
4Indicat r f r c king setting
5Display symb ls P siti n c king z ne
6LED display Sens r-l ck (child-pr f l ck)
7P-key (sens r key f r setting the p wer functi n)
8Plus and minus keys (preselecti n keys f r c king settings)
9Sens r key f r l ck f the perati n fascia (child-pr f l ck)
10 Sens r key ON (stand-by switch)/OFF

EKI 307 15
Safety instructions
C nnecti n and perati n
■ KÜPPERSBUSCH appliances are c nstructed in acc rdance with the relevant
safety regulati ns.
■ If the h b is perated with an ven installed underneath, this may nly be
a KÜPPERSBUSCH ven with fan c ling.
■ The appliances may nly be c nnected t the mains, maintained and
repaired by a qualified electrician acc rding t valid safety regulati ns. W rk
carried ut inc rrectly places y ur safety at risk.
■ Pers ns with cardiac pacemakers r implanted insulin pumps must make
sure that their implants are n t affected by the inducti n field (the frequency
range f the inducti n field is 25-50 kHz).
The h b
■ Owing to the very fast reaction at the high power setting (power
level), do not use the induction hob without supervision!
■ When c king, pay attenti n t the heat-up speed f the c king z nes.
Av iding b iling the p ts dry as there is a risk f the p ts verheating!
■ D n t place empty p ts and pans n c king z nes which have been
switched n.
■ Immediately switch ff the c king z ne after using with the respective
minus key and n t just by p t rec gniti n.
■ Overheated fats and ils may sp ntane usly ignite. F d inv lving the use
f fats and ils, e.g. chips, may nly be c ked under supervisi n. Never
extinguish ignited fats and ils with water! Put the lid n the pan and switch
ff the c king z ne.
■ The glass ceramic h b is extremely r bust. Av id dr pping hard bjects nt
the glass ceramic h b. P inted bjects falling nt y ur h b might break it.
■ If cracks, fractures r any ther defects appear in y ur glass ceramic h b,
immediately switch ff the appliance. Disc nnect fuse immediately and call
the Cust mer service.
■ If the h b cann t be switched ff due t a defect in the sens r c ntr l
immediately disc nnect y ur appliance and call the Cust mer service.
■ The glass ceramic h b sh uld n t be used as a st rage area.
■ D n t put kitchen f il r plastic nt the c king z ne.
■ Metal bjects, e.g. kitchen utensils, cutlery, must n t be left n the surface
f the inducti n h b as they can bec me h t.
■ Take care with metal bjects which are w rn n the b dy if they c me int
the direct vicinity f the inducti n h b as they can bec me h t. N n-
magnetisable bjects (e.g. g ld r silver rings) are n t affected.
■ D n t heat any un pened f d cans r laminated packing n the h b.
There is a risk f bursting!
■ Be especially careful t keep the sens r keys clean since s iling c uld be
mistaken f r finger c ntact by the appliance. Never put anything (pans, tea
t wels etc.) nt the sens r keys!
If f d b ils ver nt the sens r keys, we advise y u t activate the OFF-
key.
■ H t pans sh uld n t c ver the sens r keys, therwise the appliance
switches itself ff aut matically. In this case the ven aut matically shuts
ff.
■ If there are any pets in the apartment which c uld c me near the h b,
activate the child-pr f l ck.
Before using the appliance for
the first time
Rem ve f reign matter and packaging.
Bef re first use the h b sh uld be cleaned with a damp cl th and a little
washing-up liquid.
The h b is resistant against thermal sh cks (c ldness and heat) and als very
r bust.
Please bserve the cleaning and servicing instructi ns.
The hob
The h b is pr vided with an inducti n c king area.
An inducti n c il underneath the glass ceramic surface generates an
electr magnetic alternating field which penetrates the glass ceramic and
induces the heat-generating current in the p t base.
With an inducti n c king z ne the heat is n l nger transferred fr m a
heating element thr ugh the c king p t int the f d being c ked but the
necessary heat is generated directly in the c ntainer by means f inducti n
currents.
Advantages f the inducti n h b
– Energy-saving c king thr ugh the direct transfer f energy t the p t
(suitable p ts/pans made f magnetisable material are required).
– Increased safety as the energy is nly transferred when a p t is placed n
the h b.
– Energy transfer between inducti n c king z ne and p t base with high
efficiency.
– High heat-up speed.
– The risk f burns is l w as the c king area is nly heated thr ugh the pan
base, any f d which b ils ver d es n t stick t the surface.
– Rapid, sensitive c ntr l f the energy supply.
S me instructi ns n c kware
The c kware used f r the inducti n c king z ne must be made f metal,
have magnetic pr perties and a sufficient base area. Only use pots with a
base suitable for induction.
This is how to establish the suitability of a pot:
C nduct the magnet test described bel w r make sure that the p t bears the
symb l f r suitability f r c king with inducti n current.
Magnet test:
M ve the magnet t wards the base f y ur c kware. If it is attracted, y u can
use the c kware n the inducti n h b.
Note:
When using p ts suitable f r inducti n fr m s me manufacturers, n ises may
ccur which are attributable t the design f these p ts.
Suitable c kware Unsuitable c kware
Enamelled steel p ts with thick
base
P ts made f c pper, stainless
steel, aluminium, ven-pr f glass,
w d, ceramic and terrac tta
Cast ir n p ts with an enamelled
base
P ts made f multi-layer stainless
steel, stainless ferrite steel and
aluminium with special base

16 EKI 307
Use of the cooking zones
Please note the safety instructions!
The inducti n h b has tw c king z nes. The display symb ls n the c ntr l
panel indicate the p siti n f the c king z nes n the h b.
While the h b is in use, each activati n f a key is c nfirmed by an ac ustic
signal.
Switching n the h b
T uch the sens r key ON/OFF (stand-by switch).
The appliance is in perati n (stand-by m de).
The c king z nes can n w be used.
In the setting displays f the f ur c king z nes the setting “0” appears.
The stand-by m de aut matically switches itself ff,
– if y u d n t press an ther sens r key during the f ll wing 10 sec nds
and n c king z ne is in perati n.
– if y u d n t press any ther key again after y u switch ff the last
c king z ne in use.
The switching- ff time f r this is 10 sec nds.
– if ne r m re keys are pressed f r m re than 10 sec nds.
Switching the c king z ne n and ff;
Changing the c king setting
F r each c king z ne y u have nine c king settings available.
By using the plus r minus keys the c king z ne is switched n and ff and
the desired c king level is selected.
The number f the c king level will be indicated in the respective display.
– Brief activati n f the keys changes the c king setting by ne unit.
– Pr l nged t uching increases r reduces the setting t the c rresp nding
st p.
As far as p ssible, start c king at the highest setting and c ntinue at a
smaller setting.
If y u t uch the plus key, the
c king z ne starts at c king
setting “1”. The value f the
c king setting can then be set.
If y u t uch the minus key, the
c king z ne starts at the
maximum setting (setting “9”).
The value f the c king setting
can be changed.
T uch simultane usly the plus and
minus keys t switch ff the
c king z ne.
After the c king z ne has been switched ff, the display changes after
3 sec nds, fr m “0” t “ ”.
Aut matic initial c king
All c king z nes have an aut matic initial c king functi n. The parb iling
b st is activated at full p wer. The parb iling b st time depends n the
c king level which has been selected after the activati n (subsequent c king
level). The c king z ne aut matically changes t the selected subsequent
c king level as s n as the set parb iling b st time has elapsed.
Select the c king level “9“ with
the minus key.
Then switch n the aut matic
initial c king by means f the plus
key.
The display will read “A”.
Within 10 sec nds the desired
subsequent c king level (1-8) has
t be selected by means f the
minus key.
During the parb iling b st the
selected subsequent c king level
and “A“appear alternatively in the
display.
By pressing the plus key a higher
subsequent c king level can be
selected. The parb iling b st time
is adapted c rresp nding t the
values f the table.
By pressing the minus key the
parb iling b st is st pped
bef rehand.
or
Subsequent
c king level
Time f parb iling
b st in secs.
177
2102
3128
4178
5305
6460
7102
8128
9–

EKI 307 17
The p wer functi n
The back c king z ne has a p wer functi n with which this c king z ne can
be activated with a higher utput (3000 Watt).
If the p wer functi n is switched n, there is nly heating p wer f 600 W
available f r the fr nt c king z ne.
T activate the p wer functi n, the P-key is pressed.
The display will read “P”.
The p wer functi n is effective f r a peri d f 10 minutes. Then the appliance
is switched back t the maximum c king setting.
Renewed activation f the P-key after the aut matic return activates the
p wer functi n f r an ther 10 minutes.
If the p t is rem ved while the p wer functi n is active, the time is st pped.
If the p t is placed n the z ne again bef re the p t detecti n time
(10 minutes) has elapsed, the p wer functi n c ntinues t run f r the
remaining peri d.
Interaction of the two front cooking zones
If the c king z ne is perated with the p wer functi n, the p wer f the fr nt
c king z ne is reduced t 600 Watt. The fr nt c king z ne can then be
perated at a maximum setting f 7. If a higher setting is selected, the
numbers f the c king setting selected and the setting currently in use are
displayed alternately in the c king setting display, e.g. 9 and 7.
Premature cut-out f the p wer functi n is p ssible by
– pressing the P-key again;
– activating the minus key bel nging t the c king z ne.
Residual heat indicat rs
As l ng as the c king z ne is still h t
(heating f the glass ceramic nly thr ugh
h t p t) an “ ” will appear in the display
when the c king z ne has been switched
ff.
The p t rec gniti n
All c king z nes have a p t rec gniti n functi n.
If n pan r a p t unsuitable f r inducti n
is placed n the activated c king z ne, a
appears in the display. Then the
c king z ne switches ff aut matically
after 10 minutes.
The p t rec gniti n is f r y ur safety and saves energy as it immediately
deactivates the p t rec gniti n if n p t is placed.
[Switch ff the c king z ne with the c rresp nding minus key after using.
D n t use the pan rec gniti n functi n.
An empty p t that has been placed n the c king z ne can activate the
c king z ne again and heat up the empty p t.
Switching the h b ff (rapid cut- ut)
– T uch the sens r key ON/OFF .
The c king setting display g es ff. All c king z nes are immediately
switched ff.
Sens r-l ck (child-pr f l ck)
Operating the sens r l ck detains unauth rised pers ns fr m using the
appliance.
– The switched ff appliance can nly be put in the stand-by m de when
the sens r-l ck is activated.
– If the sens r-l ck is activated while c king the c king z nes cann t
be switched.
The p wer functi n cann t be switched n.
By t uching the l cking key the
sens r-l ck is activated.
Successful l cking is indicated by
the c rresp nding c ntr l lamp.
By t uching the l cking key again
the sens r-l ck is deactivated.
Attention:
Switching the h b ff d es n t
cancel the sens r-l ck!

18 EKI 307
Time limit functi n (h liday functi n)
The appliance has an aut matic time limit functi n. It prevents the appliance
fr m being in perati n f r a l nger peri d f time.
The timer f the time limit functi n depends n the setting f the c king level:
the higher the setting f the c king level the faster it switches ff.
The time limit functi n perates f r each c king z ne seperately.
Other functi ns
■ If tw r m re sens r keys are pressed at the same time – e.g. when a
pan is mistakenly put nt a sens r key – n functi n is activated. After
10 sec nds the electr nics switch ff aut matically.
Exception:
– Switching ff the c king z nes
■ If y u c ntinue t press a sens r key after having set the highest c king
setting, the electr nics switch ff aut matically after 10 sec nds.
■ If ne r m re keys are pressed f r m re than 10 sec nds, the electr nics
switch ff c mpletely.
■ The appliance d es n t aut matically switch n again after a p wer failure.
The sens r-l ck ist n l nger active.
■ The h b is switched ff if the electr nics bec me verheated (see N tes n
use)
N tes n use
If the h b is used at full p wer f r a lengthy peri d, the p wer electr nics may
n l nger be c led t the necessary extent at r m temperature.
T ensure that n excessive temperatures ccur in the electr nics, the p wer
f the c king z nes may be reduced aut matically.
This is indicated by tw numbers flashing alternately in the c king setting
display, e.g. 9 and 8. These are the numbers f the selected setting and the
setting currently in use.
If, during n rmal use f the h b and at n rmal r m temperature, tw
numbers frequently flash alternately in the c king setting display, the c ling
is pr bably n t sufficient. A lack f c ling penings in the furniture r leaks
in the air channel may be the cause.
The installati n may has t be checked.
Cleaning and Care
■ Never use sharp r abrasive agents!
Usually it is sufficient t clean the
appliance with a damp cl th and a
little washing-up liquid each time y u
use it. Wipe dry afterwards.
■ Incrustati n due t b iled ver f ds
sh uld first be s aked – best with a
wet cl th. Then rem ve them with a
glass scraper. Rem ve sugar and
melted plastic immediately while the
c king surface is still h t.
■ Clean the glass ceramic c king surface after every use. Be especially
careful t keep the sens r keys clean since s iling c uld be mistaken f r
finger c ntact by the appliance. Immediately rem ve s iling. If f d b ils
ver nt the sens r butt ns, we advise y u t switch ff the appliance.
■ Care f r y ur glass ceramic h b nce a week. Regular care builds up a
pr tective layer and als eases day t day cleaning. Please bserve the
cleaning and servicing instructi ns. Even heavy s iling can be cleaned with
a cleanser and en ugh water. Afterward always wipe dry with a cl th.
C king level Appliance switches ff after
110 h urs
2
35hurs
44hurs
53hurs
6
7
8
2hurs
9 / P 1 h ur

EKI 307 19
What to do if trouble occurs
Unplug the appliance before repair!
First check whether there has been any perating err r. Y u can deal with
s me pr blems that ccur y urself.
Important note:
Repairs sh uld nly be carried ut by a qualified gas fitter!
Even during the guarantee peri d repairs will n t be free f charge if due t
inc rrect perati n r t n n-adherence t ur instructi ns given under “What
t d if tr uble ccurs”.
Always indicate the data pr vided n the rating label when calling in Cust mer
Service r rdering spare parts. The rating label is l cated at the b tt m side
f the h b. It is als stuck nt the c ver page f this perating manual.
Fault Cause Remedy
N t p ssible t
switch ff the
appliance.
Electr nic c mp nent
defective.
Rem ve p t fr m c king
z ne, switch ff the fuse,
call Cust mer service.
LED display f r
c king settings and
heat display d es
n t c me n r nly
partially.
LED display defective. Call Cust mer service.
Risk f burning, as the
temperature warning is n t
guaranteed.
P t d es n t
bec me h t.
Unsuitable c kware
(n n-magnetic,
ferr magnetic, p t
diameter t small) -
in the display.
Use suitable c kware.
Sens r-l ck n t
deactivated.
Deactivate sens r-l ck.
Electr nics err r -
F in the display.
Call Cust mer service.
(C king areas which still
w rk can c ntinue t be
used until the cust mer
service staff arrive).
Thermal limit f the
p wer –
Flashing f the c king
setting display.
Wait until h b c ls d wn.
Plug r h useh ld fuse
defective –
Displays dark.
Check r replace plug r
fuse.
C ling f the inducti n
element verl aded.
Air sh rt-circuit – H t air/
c ld air can impair c ling,
All w appliance t c l
d wn.
Sens rs d n t react
t t uch.
P ts, wet cleaning cl ths
etc. in c ntr l area.
Clear away, clean and dry
the glass in the c ntr l
area,
if necessary call Cust mer
service.
N ises when using
p ts f s me makes.
Design f the p ts. Unav idable as due t
make.
(N ises may be reduced by
selecting the next c king
setting).

20 EKI 307
Installation
N te
The KÜPPERSBUSC induction hob may only be built-in in accordance
to the instructions included in this manual:
–on a cover plate
– above a KÜPPERSBUSC electrical built-in oven with cooling fan
– above a drawer, only with acc. no. 136.
The KÜPPERSBUSC induction hob must not be installed above a
dishwasher.
In case of a failure to observe these instructions, KÜPPERSBUSC shall
decline any liability and the approved marks of conformity become
invalid!
N tes f r fitting
■ Sh uld the built-in c king surface be perated with an ven installed
underneath, nly Küppersbusch built-in baking vens with appliance c ling
are permitted.
■ If the c king surface is built in ab ve a b tt m cupb ard a c ver plate has
t be built int the kitchen cupb ard.
■ P ssible thickness f w rkt ps:
ab ve an ven installed underneath: 40 - 50 mm
ab ve a c ver plate: 30 - 50 mm.
If these dimensi ns are n t respected the electr nics f the h b can
verheat!
We rec mmend installati n similar t that illustrated bel w.
■ The distance t m unted
cupb ards sh uld be f r
technical reas ns at least
300 mm.
■ C ker h ds r wall
cupb ards m unted ab ve
the h b must be installed
with a minimum distance f
650 mm t the h b.
■ N cr ss-bars may be in the
area f the cut- ut
underneath. They have t be
reduced at least t the
pening size f the w rkt p.
■ The plastic finish r the veneer f built-in kitchen furniture must have been
pr duced using a heat-resistant adhesive (100 °C).
Dimensi n drawing f r the installati n in the inducti n h b:
■ The distances f the
pening t the wall f r
the fr nt, the back and
the side (see last
drawing) have t
c rresp nd t the
dimensi n drawing!
■ A c rner m ulding f
s lid w d may be fitted
t the w rkt p at the
back f the h b pr vided
that the minimum
clearances are
maintained.
■ The w rking surface must
be installed abs lutely
h riz ntally and the pening must be cleanly cut.
We rec mmend t seal the cut secti ns f the w rkt p f r built-in
dishwashers and ven h bs with a water-repellent pr tecti n paint.
■ Each time the appliance is rem ved fr m the w rkt p, replace the seals.
■ In the case f ceramic-tiled w rkt ps it is necessary t pr vide an additi nal
seal with the aid f a permanently elastic sealing c mp und. Such sealing
c mp und can be purchased as KÜPPERSBUSCH spare part N . 53 55 69.
■ A ventilati n slit f at least 7 mm must be pr vided ab ve the panel in every
meth d f installati n. Ventilati n penings are t be pr vided in the back
f the cupb ard.
C ld air is drawn in thr ugh the fr nt ventilati n slit. The heated air escapes
thr ugh the ventilati n penings in the rear. An air channel t be installed
(see f ll wing descripti ns) prevents the heated airfl wing back t the c ld
air intake side.
Installati n f the c king surface
– Insert ventilati n slits (see dimensi n drawing).
– Cutting- ut the pening.
– Seal the edges f the w rkt p.
– Install the w rking t p h riz ntally.
Encl sed t the appliance are tw f am m uldings. Which ne has t be used
depends n the installati n f the h b:
■ Above a cover plate:
Use f am m uldings with
50 mm height.
■ Above an oven installed
underneath:
Use f am m uldings with
20 mm height.
– Rem ve the pr tecti n tape n
the b tt m f the appliance.
Aspirati n
Venilati n

EKI 307 21
–Stick the right f am m ulding
f r the installati n n the
adherent strips.
Thus a back-fl w f warmed air
is prevented fr m entering the
c l air intake.
This is imp rtant f r pr per
functi ning!
Installation above a cover plate:
■ If the h b is built in ab ve a b tt m cupb ard a c ver plate has t be built
int the kitchen cupb ard.
■ The built-in c king surface has an
installati n depth f 90 mm (space
between the upper edge and the c ver).
If the installati n depth is n t reached
the aerial guide cann t be installed. If it
is exceeded the aerial guide is n t
effective.
– Install the c ver plate in the
menti ned installati n depth f
90 mm.
Installation above a KÜPPERSBUSC built-in electric oven.
■ Sh uld the built-in c king surface be perated with an ven installed
underneath, nly KÜPPERSBUSCH built-in baking vens with appliance
c ling are permitted.
■ The w rkt p must be 40 - 50 mm thick s that the aerial guide between
built-in baking ven and w rkt p can be c rrectly installed. If the installati n
depth is n t reached the aerial guide cann t be installed. If it is exceeded
the aerial guide is n t effective.
– Seal the penings in the ventilati n area in the ven t p with the encl sed
adherent strips.
– Imp rtant: Pay attenti n t the sealing. It is imp rtant n t t create an air
sh rt circuit between inlet and utlet side.
Installation above a drawer, only with acc. no. 136.
The inducti n h b may nly be built in ab ve a drawer with the air baffle plate
- access ry n . 136.
– The air baffle plate sh uld be attached in acc rdance with the instructi ns
f r access ry n . 136.
Only for ceramic-tiled worktops
– Clean the surfaces, apply the sealant in a c ntinu s strip and press the h p
int the pening.
– Rem ve excess sealant by cutting and clean the sealed surface immediately
with water.
Installati n f the h b
Using clips makes it easier and quicker f r y u t install these units. Y u can
carry ut the c mplete installati n w rk fr m ab ve:
■ Always lift the h b by h lding it at the sides. D n t lift it by the fr nt bar.
■ Be extremely careful when installing the glass ceramic c king surface!
D n t place r dr p any sharp r p inted t ls (screwdrivers, etc.) n the
glass surface!
■ The glass ceramic h b must have a level and flush bearing. Any dist rti n
may lead t fracture f the glass panel.
– Make sure that the sealing f the h b is pr perly seated. If the w rkt p
surface is uneven (tiles etc.), rem ve the sealing strip and seal with a
heat resistant sealing c mp und.
– Then drive in the clips int the w rkt p cut- ut as sh wn in the
illustrati ns. It is n t necessary t adjust the height due t the h riz ntal
st p m ti n device.
– W rkt ps with m re than 30 mm
thickness:
– With w rkt ps with 30 mm
thickness the clips have t be
screwed d wn with tw screws (n t
supplied)!
– P siti n the h b acc rding t the illustrati n n the left side (1), align it
(2) and insert the clips (3).
Sh uld the w rkt p recess have been cut
ut slightly t large, it is p ssible t
increase the pre-l ad f the clips by
screwing.

22 EKI 307
Electrical c nnecti n
■ The electrical connection must be carried out by a qualified
electrician who is authorised to carry out such work!
■ Statut ry regulati ns and the c nnecti n specificati ns issued by the l cal
p wer supply c mpany must be strictly bserved.
■ It must n t be p ssible t t uch c mp nents which are insulated under
perating c nditi ns.
■ The unit is ready t plug in and may nly be c nnected t a pr perly
installed pr tected s cket.
Installing and wiring a s cket r replacing the c nnecti n cable sh uld nly
be perf rmed by an electrician and in bservance f the relevant
regulati ns.
■ The s cket has t be pr tected seperately.
■ If the s cket is inaccessible after the installati n, safety regulati ns require
that an all-p l is lat r with a c ntact pening f at least 3 mm be used
n the installati n side.
■ The wall-s cket can be m unted under the w rking t p bel w the h b r
in a side cupb ard in the wall. D n t m unt it ab ve the c king area!
■ When c nnecting and repairing the appliance disc nnect it fr m the
electricity supply with ne f these devices.
■ Any superflu us cable must be rem ved fr m the installati n area beneath
the appliance.
Connection is via the mains plug int a wall s cket.
T tal rating at 230 V: 3.6 kW
Electrical c nnecti n 230 - 240 V, 50 Hz
Fuse current 16 A