Kurzweil KP-80 User manual

KP-80
0
5
25
75
95
100
KP 80_Manual_Rev A

INFORMATION FOR YOUR SAFETY!
PRECAUTIONS
PLEASE READ CAREFULLY BEFORE PROCEEDING
Please keep this manual in a safe place for future reference.
Power Supply
Please connect the designated AC adaptor to an AC outlet
of the correct voltage.
Do not connect it to an AC outlet of voltage other than that
for which your instrument is intended.
Unplug the AC power adaptor when not using the
instrument, or during electrical storms.
Connections
Before connecting the instrument to other devices, turn off
the power to all units. This will help prevent malfunction and
/ or damage to other devices.
Location
Do not expose the instrument to the following conditions to
avoid deformation, discoloration, or more serious damage:
Direct sunlight
Extreme temperature or humidity
Excessive dusty or dirty location
Strong vibrations or shocks
Close to magnetic fields
Interference with other electrical devices
Radios and televisions placed nearby may experience
reception interference. Operate this unit at a suitable
distance from radios and televisions.
Cleaning
Clean only with a soft, dry cloth.
Do not use paint thinners, solvents, cleaning fluids, or
chemical-impregnated wiping cloths.
Handling
Do not apply excessive force to the switches or controls.
Do not let paper, metallic, or other objects into the
instrument. If this happens, unplug the AC adaptor from the
wall outlet. Then have the instrument inspected by qualified
service personnel.
Disconnect all cables before moving the instrument.
2
THE FCC REGULATION WARNING (for USA)
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
Unauthorized changes or modification to this system can
void the user's authority to operate this equipment.
CAUTION
The normal function of the product may be disturbed by
Strong Electro Magnetic Interference. If so, simply reset
the product to resume normal operation by following the
owner's manual. In case the function could not resume,
please use the product in other location.
0
5
25
75
95
100
AW_M15_Manual_G07_160321
2016󾾠󾾠3󾾠󾾠21󾾠󾾠 14:45:22

Contents
3
Panel & Display Description
Front Panel..................................................................4
Rear Panel...................................................................4
Display.........................................................................5
Setup
Power Supply...............................................................6
Connections
Connecting a Footswitch.............................................7
Connecting a pair of Headphones...............................7
Connecting an Audio Equipment.................................7
Connecting a Microphone............................................7
Connecting a Computer...............................................7
Playing the Demos....................................................8
Playing the Voices
Selecting a Voice.........................................................8
Playing Two Voice Simultaneously-DUAL...................8
Touch...........................................................................9
Sustain.........................................................................9
Pitch Bend Wheel........................................................9
DSP Effect...................................................................9
Transpose..................................................................10
Octave.......................................................................10
Playing the Styles
Selecting a style........................................................11
Playing a Fill..............................................................11
Intro/Ending...............................................................11
Sync Start..................................................................12
Fade In/Out................................................................12
Accompaniment Volume............................................12
Tempo........................................................................12
Auto Bass Chord.......................................................13
One Touch Setting.....................................................14
Memory
Memory......................................................................15
Chord Dictionary.....................................................15
Metronome
Turning on the Metronome........................................16
Selecting the Beat.....................................................16
Playing the Songs
Listening to the Songs...............................................17
Lesson Mode.............................................................17
Recording and Playback.........................................18
MIDI Functions
What’s MIDI?.............................................................19
MIDI Terminals...........................................................19
Trouble Shooting.....................................................20
Specifications..........................................................20
Appendices
Voice List...................................................................21
Style List....................................................................23
Song List...................................................................25
Chord List..................................................................26
MIDI Implementation Chart........................................27
0
5
25
75
95
100
AW_M15_Manual_G07_160321
2016󾾠󾾠3󾾠󾾠21󾾠󾾠 14:45:22

Panel & Display Description
Front Panel
4
32.
Connect DC IN power adaptor (optional).
33. POWER ON/OFF
Turn the power on and off.
34. AUDIO OUT
Connect the audio equipment.
35. PHONE
Connect a pair of headphones.
36. MIC
Connect a microphone.
37. SUSTAIN
Connect a sustain pedal.
38. USB
Connect to a computer
DC IN
Rear Panel
1
23 4 5 6 78
9
10 11 12 13
14
15 16 17
1. MASTER VOLUME
Adjust the master volume.
2. START/STOP
Start or stop playing the song in Song Mode.
Start or stop playing the style in Style Mode.
3. SYNC START
Turn the SYNC START on and off.
4. INTRO/ENDING
Play the Intro or Ending.
5. FILL A/MAIN A
Play the Fill-in, and change to MAIN A.
6. FILL B/MAIN B
Play the Fill-in and change to MAIN B.
7. FADE IN/OUT
Turn the Fade In or Fade Out on.
8. A.B.C.
Turn the Auto Bass Chord on and off.
9. ACC.VOL
Adjust the accompaniment volume.
10. TEMPO
Adjust the current tempo.
11. CHORD DICT.
Enter the Chord Dictionary.
12. LESSON
Change the Lesson Mode.
13. L/R PART
14. DSP
Turn the DSP effect on and off.
15. STORE
Register the memory.
16. M1-M4
Recall the memory settings.
17. O.T.S.
Enter the One Touch Setting Mode.
31. PITCH BEND
Bend notes up or down.
31
32 33 34 35 36 37 38
DC IN
0
5
25
75
95
100
AW_M15_Manual_G07_160321
Change the left and right hand in Lesson Mode.

Panel & Display Description
Display
RECORD
PLAY
SUSTAIN
TOUCH
1
2
3
4
12
13
15
16
17
5
19
20
21 22
23 24 25 26 27 28
18
23. DUAL
Turn the Voice R2 on and off.
24. SUSTAIN
Turn the Sustain effect on and
off.
25. TOUCH
Turn the Touch response on and
off.
26. METRO
Turn the metronome on and off.
27. RECORD
Enter the Record Mode.
28. PLAY
Play back the recorded
performance.
29. DATA DIAL
Increase and decrease the value.
30. +,-,NUMBER KEYS
Select the number or adjust the
parameters.
1. RECORD
2. PLAY
3. SUSTAIN
4. TOUCH
5. VOICE/STYLE/DEMO/SONG
6. MEASURE
7. BEAT
8. TEMPO
9. STROE M1-M4/ONE TOUCH SETTING
10. DUAL/DSP
11. LEFT/RIGHT HAND LESSON MODE
12. NOTE INDICATION
13. A.B.C./FADE/A/B
14. CHORD
15.TREBLE CLEF
16.BASS CLEF
17.USB
29
30
678
9
10
11
14
5
18. VOICE
Enter the Voice Mode.
19. STYLE
Enter the Style Mode.
DEMO
Enter the Demo Mode.
20. SONG
Enter the Song Mode.
21. OCTAVE
Adjust the Octave value.
22. TRANSPOSE
Adjust the Transpose value.
0
5
25
75
95
100
AW_M15_Manual_G07_160321

DC IN
6
Setup
This section contains information about setting up your instrument and preparing to play. Please go through this section carefully
before turning the power on.
Power Supply
You can power the unit either by batteries or by power adaptor. Follow
the instructions described below.
Using Batteries
6 pieces of AA size (SUM-3 or Lr6) or equivalent alkaline batteries
must first be installed into the battery compartment.
1. Open the battery compartment cover located on the bottom cabinet
of the unit.
2. Insert the batteries, carefully follow the polarity markings on the
cabinet.
3. Replace the compartment cover, making sure that it locks firmly in
place.
Caution:
Do not mix old and new batteries.
Always use same types of batteries.
Always remove the batteries from the unit when it is not being used for
an extended period of time.
Using Power Adapter
1. First, please make sure that POWER ON/OFF switch of the
instrument is set to OFF.
2. Connect the AC adaptor to the power supply jack.
3. Plug the AC adaptor into an AC outlet. And when turning the power
OFF, simply reverse the procedure please. This will automatically
cut off the battery power supply.
4. Turn the power ON.
Note:
When the keyboard is not in use or in the time of thunderstorm, please
disconnect the power for safety purpose.
0
5
25
75
95
100
AW_M15_Manual_G07_160321
2016󾾠󾾠3󾾠󾾠21󾾠󾾠 14:45:24

DC IN
DC IN
DC IN
DC IN
DC IN
Connections
Connecting a Footswitch
Connecting a pair of Headphones
Connecting an Audio Equipment
Connecting a Computer
7
An optional footswitch can be plugged into the sustain jack and be
used to switch sustain on or off. Simply by pressing a sustain
footswitch, you will have a natural sustain as you play.
A standard pair of stereo headphones can be connected to the
PHONES jack for private practice or late-night playing. The internal
stereo speaker system is automatically shut off when a pair of head
phones is plugged into this jack.
Note:
Do not listen with the headphones at high volume for long periods
of time. Doing so may cause hearing loss.
Plug an audio cord into the AUDIO OUT jack.
Then plug the other end of the cord into AUX IN of the amplifier.
Note:
To avoid damaging the speakers, please ensure that the volume has
been set to the minimum level before connecting the power and other
devices.
The instrument receives and transmits MIDI messages via the USB
connector.
Connecting a Microphone
You can connect an external microphone to MIC IN jack.
0
5
25
75
95
100
AW_M15_Manual_G07_160321
2016󾾠󾾠3󾾠󾾠21󾾠󾾠 14:45:26

8
Playing the Demos
Playing Voices
The instrument features 300 voices, including 3 drum kits. Please refer to Voice List.
Selecting a Voice
8
The instrument features 100 demo songs.
1. Press the [STYLE] and [VOICE] buttons simultaneously to start
playing the demo.
2. Select a demo song.
Use the data dial, the number keys, the [+] button or the [-] button to
select the desired demo song.
Adjust the volume with the [MASTER VOLUME] knob.
Press the [STYLE] and [VOICE] buttons simultaneously again or
press the [START/STOP] button to stop playing and exit the demo
mode.
Note:
In the DEMO mode, all buttons except START/STOP, TEMPO+,
TEMPO-, +, -, DSP, VOLUME, POWER ON/OFF will not be available.
1. Press the [VOICE] button.
Enter the VOICE mode. LCD shows “VOICE R1”, the voice
number and the voice name.
2. Select a voice.
Use the data dial, the number keys, the [+] button or the [-] button to
select the voice you want to play.
3. Play the voice.
You can play the keyboard and listen to the selected voice.
Note:
While changing a voice, pay attention to the rules. If you press the
VOICE button, the voice will be changed between Voice R1 and Voice
R2 when the dual voice is on.
Playing Two Voice Simultaneously-DUAL
1. Press the [DUAL] button.
GrandPno
0
5
25
75
95
100
AW_M15_Manual_G07_160321
2016󾾠󾾠3󾾠󾾠21󾾠󾾠 14:45:28

Playing the Voices
9
2. Play the voices.
Two different voices are sounded simultaneously in a layer.
The number of the dual voice will be displayed on the LCD.
3. Selecting a voice for VOICE R2.
When the number of the dual voice is displayed, you can select a
voice for Voice R2. Use the data dial, the number keys, the [+]
button or the [-] button.
Strings2
VOICE R2
Touch
The keyboard is equipped with a touch response feature that lets you
dynamically and expressively controls the level of the voice with your
playing strength – just as on an acoustic instrument. Press the
[TOUCH] button to turn the touch response on and off.
GrandPno
VOICE R1
TOUCH
Sustain
When the Sustain feature is ON, all notes played on the keyboard
would have a longer sustain. Press the [SUSTAIN] button to turn the
SUSTAIN effect ON or OFF.
Note:
When you step on the “sustain pedal”, the sustain effect is stronger
than the effect by pressing the [SUSTAIN] button.
GrandPno
VOICE R1
SUSTAIN
Pitch Bend Wheel
Use the pitch bend wheel to bend notes up (roll the wheel away from
you) or down (roll the wheel toward you) while playing the keyboard.
The pitch bend wheel is self-centering and will automatically return to
normal pitch when released.
DSP Effect
This function allows you to perform the overall sound in a more realistic
effect.
The DSP effect is set to ON when keyboard power on.
Press the [DSP] button to turn on or off the DSP effect.
GrandPno
VOICE R1
0
5
25
75
95
100
AW_M15_Manual_G07_160321
2016󾾠󾾠3󾾠󾾠21󾾠󾾠 14:45:28

10
Playing the Voices
Transpose function allows the overall pitch of the instrument to be
transposed up or down by a maximum of 6 semitone increments.
1. Press the [TRANSPOSE + ] or [TRANSPOSE - ] button. The LCD
show that the transpose value ranging from -6 to 6.
2. Use the data dial, the [TRANSPOSE + ] button or the
[TRANSPOSE - ] button to change the transpose value.
3. Press the [TRANSPOSE + ] and [TRANSPOSE - ] buttons
simultaneously to reset the transpose to 0. Transpos
Transpose
Octave
Octave function determines the relative octave setting for the
keyboard-played voice R1, R2.
1. Press the [OCTAVE + ] or [OCTAVE - ] button. The LCD show that
the octave value ranging from -1 to 1.
2. Use the data dial, the [OCTAVE + ] button or the [OCTAVE - ] button
to change the octave value.
3. Press the [OCTAVE + ] and [OCTAVE - ] buttons simultaneously to
reset the octave to 0. Octave
0
5
25
75
95
100
AW_M15_Manual_G07_160321
2016󾾠󾾠3󾾠󾾠21󾾠󾾠 14:45:28

Playing the Styles
The instrument features 200 styles in a variety of different musical genres. Try selecting some of the different styles (Refer to
Style List) and play with the auto accompaniment.
Selecting a style
11
1. Press the [STYLE] button.
Enter the STYLE mode. LCD shows “STYLE”, the style number
and the style name.
2. Use the data dial, the number keys, the [+] button, the [-] button to
select the style you want to play.
3. Press the [START/STOP] button to start the rhythm tracks of the
auto accompaniment.
8Beat1
STYLE
Playing a Fill
Auto fill in function automatically adds a fill to your performance. When
the fill-in is finished,accompaniment shifts to the Main section (A,B).
Note:
Hold down the FILL-IN A/B button when the style is playing, the
selected FILL pattern repeats continuously until button is released.
Press FILL-IN A/B when style stop, it will change to the normal section,
the icon A/B on LCD will be lightened.
8Beat1
STYLE
8Beat1
STYLE
B
Intro/Ending
The intro is an opening section of the song.Each preset style features
two different patterns. When the intro pattern finished, the system will
automatically shift to the main section.
Ending is used for the ending of the song. When the ending is finished,
accompaniment automatically stops.The length of the ending differs
depending on the selected style.
1. Press the [STYLE] button.
2. Select a style
3. Turn the Chord Mode on.
4. Turn SYNCHRONIZED START on.
5. Press the [INTRO/ENDING], the “A” or “B” flashes on LCD, the
style is ready to play.
6. It will start the accompaniment as soon as you start playing in Chord
section. When the playback of the intro is finished, it automatically
leads into main A or B section.
7. Press the [INTRO/ENDING] again will lead it into the ending section.
When the ending is finished, the auto accompaniment automatically
stops.
Note:
Press [FILL A] or [FILL B] before the ending finished will lead it into
main A or main B section.
0
5
25
75
95
100
AW_M15_Manual_G07_160321
2016󾾠󾾠3󾾠󾾠21󾾠󾾠 14:45:29

Playing the Styles
Sync Start
12
While the style is not playing, press the [SYNC] button. The black dots
below the tempo and the metronome flash, indicating the standby
mode of the keyboard.
1. If the A.B.C. is OFF, pressing any key will automatically begins to
play the style (rhythm track).
2. If the A.B.C. is ON, pressing any key in the left-hand range of the
keyboard will automatically begins to play the style (all tracks).
Fade In/Out
8Beat1
STYLE
◢FADE
8Beat1
STYLE
FADE◣
Accompaniment Volume
Adjust the volume of the accompaniment with the [ACC.VOL] buttons.
Repeatedly press [ACC VOL+] or [ACC VOL-] to increase or decrease
the volume. The volume ranges from 0 (no sound) to 31( Maximum)
and the current accompaniment volume level appears on the display.
Note：
1. Press the [ACC VOL+] and [ACC VOL-] buttons simultaneously to
reset the the volume of the accompaniment to 28.
2. While in DEMO, SONG or RECORD PLAY, [ACC.VOL] buttons can
not use.
Accomp V
Tempo
Each style of the instrument has been programmed with a default
tempo; however, this can be changed by using the [TEMPO+] or
[TEMPO-] buttons.
1.Use the [TEMPO+] or [TEMPO-] button to change the tempo. The
value ranges from 30 to 280.
2.Hold down the [TEMPO] buttons can change the tempo quickly.
While the tempo is changing， the data dial can also change the
tempo quickly.
3. Press the [TEMPO+] or [TEMPO-] buttons simultaneously to restore
the default tempo setting.
8Beat1
STYLE
FADE
Fade In
Starting the style with fade in produces a smooth beginning, the
volume increases from low to high.
Press the [FADE] button when Style is stopped，LCD will show FADE.
Press the [START/STOP] button to start Style playing. LCD will show
◢FADE
The Accompaniment Volume will change from 0 to the Accompaniment
Volume set value in about 8 seconds.
The keyboard volume will change from 0 to default value at the same
time.
Fade Out
Stopping the style with fade out produces a smooth ending, the volume
increases from high to low. Press the [FADE] button during Style
playing. LCD will show FADE◣
The Accompaniment Volume will change from the Accompaniment
Volume set value to 0 in about 8 seconds, and the style stops.
0
5
25
75
95
100
AW_M15_Manual_G07_160321
2016󾾠󾾠3󾾠󾾠21󾾠󾾠 14:45:29

Playing the Styles
13
Auto Bass Chord
1. Press the [A.B.C.] button, LCD show “A.B.C.”. The 19 keys on the
left of the keyboard are called accompaniment keys. The
accompaniment keys you pressed determine the type of chords that
you played.
2. Press the accompaniment keys, the corresponding chord will
display on LCD.
3. Split Point Set
Hold down [A.B.C.] button will enter in Split Point Set mode, LCD
show “Split Pt” and the split point key number. Press keyboard
set the split point key, and release the [A.B.C.] button, new split
point key number is saved. The split point key and the other keys
on the left of it are accompaniment keys.
Single Finger
Single finger type not only can detect single finger but also can detect
multi finger. And the single finger makes it easily to play chords through
only one, two or three keys. Including major, minor, seventh, and minor
seventh chord. Refer to relevant picture on the right for details.
Multi Finger
Multi finger type only can recognize those chords have listed in the
chord list, and also can be found in the dictionary function.
8Beat1
STYLE
Split Pt
Major Triad
Only press the root note on the
keyboard.
Minor Triad
Press the root note and the nearest
left black key simultaneously.
Seventh chord
Press the root note and the nearest
left white key simultaneously.
Minor seventh chord
Press the root note and the nearest
left white and black keys
simultaneously.
C7
Cm7
Cm
C
C
0
C6
1 2
CM7CM 7(#11)
3
CM(9)
45
CM7(9)
Caug
78
Cm Cm6
911
Cm7(b5)
6
C6(9) Cm7
10
13
Cm7(9)
14
Cm7(11)
15
CmM 7
16
CmM 7(9)
17
Cdim
Cm(9)
12
18
Cdim7
19
C7
20
C7sus4
21
C7(b5) C7(9)
22 23
C7(#11)
7aug
C
2928
7aug
CM
27
C7(#9)
26
C7(b13)
25
C7(b9)
C7(13)
24
30
Csus 4C1+2+5
31
0
5
25
75
95
100
AW_M15_Manual_G07_160321
2016󾾠󾾠3󾾠󾾠21󾾠󾾠 14:45:29

Playing the Styles
14
One Touch Setting
When One Touch Setting is switched on, you can instantly recall all
auto accompaniment related settings including voices selection and
digital effects simply with a single touch of a button.
1. Press the [O.T.S.] button to turns on the One Touch Setting for
current style. LCD show O.T.S. 1.
2. Press one of the [ONE TOUCH SETTING] buttons [M1]-[M4]. Voice
match the selected style can be instantly recalled with just a single
button press.
3. A.B.C. is automatically turned on during O.T.S. mode.
4. Press the [O.T.S.] button again to quit One Touch Setting mode,
“O.T.S.” disappears.
8Beat1
STYLE
O.T.S.
0
5
25
75
95
100
AW_M15_Manual_G07_160321
2016󾾠󾾠3󾾠󾾠21󾾠󾾠 14:45:29

15
Memory
There are 4 memories (M1-M4).
1. While holding the [STORE] button, press one of the MEMORY
buttons: [M1] - [M4] to register the panel settings. The new settings
will replace the previous memory data. LCD show “Mem Stor”.
The settings include the number of voice, the number of style,
tempo, beat value, sustain effect, etc.
2. Press one of the MEMORY buttons: [M1] - [M4] to recall the panel
settings.
Note:
The stored settings can not be recalled when the One Touch Setting
function is on.
The stored settings will be returned to the default settings after you
turned off the power.
Mem Stor
SquarLd1
Chord Dictionary
If you know the name of a chord but don't know how to play it, you can
use the Chord Dictionary function.
1. Press the [CHORD DICT.] button to enter this mode. The LCD
displays the Chord Type and Chord Notes.
2. The key above G#3 are used to assign the Chord Type, the keys
above C5 are used to assign the Chord Root. When the Chord
Type
and Chord Root are confirmed, the LCD will display the Chord and
its staff position.
3. Play the chords on the keyboard according to the display. If you
press the correct notes, you will hear a prompt applause sound.
4. Press the [CHORD DICT.] button again to exit this mode.
DICT
VOICE R1
VOICE R1
0
5
25
75
95
100
AW_M15_Manual_G07_160321
2016󾾠󾾠3󾾠󾾠21󾾠󾾠 14:45:30

Metronome
16
Turning on the Metronome
Press the [METRO] button to turn on the metronome.
Press the [METRO] button again to turn off the metronome.
Press the [TEMPO+] / [TEMPO-] button to change the tempo of the
metronome.
Selecting the Beat
Hold down [METRO] button will enter in Beat Set Mode. LCD show
“Beat” and beat value. Press number keys(0 and 2-9), and release the
[METRO] button, new beat value is saved. The default value is 4.
Beat
0
5
25
75
95
100
AW_M15_Manual_G07_160321
2016󾾠󾾠3󾾠󾾠21󾾠󾾠 14:45:30

Playing the Songs
17
The instrument features 100 songs (Refer to Song List). Each song can be practiced in LESSON mode.
Listening to the Songs
1. Press the [SONG] button to enter the song mode. It will play all
songs circularly. Press the [SONG] button again, it will stop the song
and exit the song mode.
2. In song mode, use the data dial, the number keys and [+] or [-]
button to select a song.
3. Once you start playing a song by pressing [START/STOP] button, it
will play current song repeatedly. Press the [START/STOP] button
again, it will stop the current song but not exit the song mode.
4. Use the [TEMPO+] or [TEMPO-] button to change the tempo of the
current song.
5. When the song is stopped, press [STYLE], [VOICE], [DUAL],
[M1] - [M4] to exit the song mode.
Lesson Mode
In the instrument, there are 3 different ways to practice the songs: time
value training, note correction training, melody off. And the keyboard
has a grading system to help you to know well about your progress.
1. In Song mode, press the [LESSON] button to enter the lesson mode
or switch the lesson mode.
2. Press the [START/STOP] button to start learning. The LCD will
display the note need to be played.
3. Press the [START/STOP] button again to stop learning.
4. There are 3 lesson modes and a grading system.
Lesson 1: the keyboard only grade the time value of the playing,
don't care the correction of the note.
Lesson 2: the keyboard only grades your practice by the note;
doesn't care about the correctness of the timing.
Only when you play the correct note, the song will
continue to the next note.
Lesson 3: the keyboard will score your practice by the correction of
the time value and note.
Grade: In lesson mode, when you finished learning the current
the song, the keyboard will play the prompt sound to tell
you the level you get.
Level 1: Ok
Level 2: Good
Level 3: Very Good
Level 4: Excellent
After grading, the song will be playing again, you can learn it again.
Cannon
0
5
25
75
95
100
AW_M15_Manual_G07_160321
2016󾾠󾾠3󾾠󾾠21󾾠󾾠 14:45:30

Recording and Playback
18
You can record your performance (up to 500 notes), and the
accompaniment.
1. Press the [RECORD] button, the record flag appears on the left of
LCD, the beat flashes.
2. Play the notes you want to record or press the [START/STOP]
button to start recording. If you want to record your performance
accompanied with the style, please turn on the A.B.C, and play the
chords on the left of the keyboard.
3. Press the [RECORD] button again to stop recording. The record flag
disappears.
4. Press the [PLAY] button to play the notes you recorded. The play
flag appears on the left of LCD.
5. Press the [PLAY] button again to stop it. The play flag disappears.
6. When recording, press [PLAY] button can stop recording and play
the notes you recorded.
Note:
If you turned off the keyboard, the data you have recorded will be lost.
GrandPno
RECORD
GrandPno
PLAY
0
5
25
75
95
100
AW_M15_Manual_G07_160321
2016󾾠󾾠3󾾠󾾠21󾾠󾾠 14:45:30

DC IN
MIDI Functions
By using the MIDI functions you can expand your musical possibilities. This section explains what MIDI is, and what it can do, as
well as how you can use MIDI on your instrument.
MIDI (short for Musical Instrument Digital Interface) allows a wide
variety of electronic musical instruments, computers and other related
devices to connect and communicate with one another. MIDI carries
event messages that specify notation, pitch and velocity, control
signals for parameters such as volume, vibrato, audio panning, and
program change information to change the voice selections.
The instrument can output the real-time playback information via MIDI
and control external MIDI devices. The instrument can also accept
incoming MIDI messages and generate sound accordingly.
What's MIDI?
MIDI Terminals
MIDI Connection
The electronic keyboard is equipped with a standard USB interface instead of
conventional MIDI IN and MIDI out connectors. The USB interface allows the
keyboard to be connected to a computer without the need to separately
purchase a MIDI interface for the computer. Most computers will automatically
recognize the keyboard as a MIDI interface, allowing MIDI messages to be
received from, or sent to, music programs running on the computer.
To connect the keyboard to a computer you will need a standard USB A-B cable
and suitable software such a music sequencing program.
Note:
Activate the computer from a sleep/suspended/standby mode before
connecting the USB cable.
Connect the USB cable to the instrument and a computer before
turning the power of the instrument on.
19
0
5
25
75
95
100
AW_M15_Manual_G07_160321
2016󾾠󾾠3󾾠󾾠21󾾠󾾠 14:45:30

Trouble Shooting
Specifications
Keyboard
61
Display
Multi-functional LCD
Polyphony
32
Voice
300, including 3 drum kits
Style
200
Song
100
Demo
100
Tempo
30-280
Registration Memory
4
Problem
The speakers produce a “pop” sound whenever
the power is turned ON or OFF.
No sound results when the keyboard is played.
When using a mobile phone, noise is produced.
The auto accompaniment does not play back
even Sync is in standby condition and a key is
pressed.
Possible Cause and Solution
This is normal and is no cause for alarm.
Make sure the master volume is set at appropriate levels.
Using a mobile phone in close proximity to the instrument may
produce interference. To prevent this, turn off the mobile phone or
use it further away from the instrument.
You may be trying to start accompaniment by playing a key in the
right-hand range of the keyboard. To start the accompaniment with
Sync Start, make sure to play a key in the left-hand range of the
keyboard.
Control button
Power on/off switch, ACC.Vol , Tempo+/-, ChordDict,
Lesson, L/R Part, DSP, Style, Voice, Song, Memory,
M1-M4, O.T.S., Dual, Sustain, Touch, Metro,
Octave+/-, Transpose+/-, +, -
Accompaniment Control
Start/Stop, Sync Start, Intro/Ending, Fill A, Fill B, Fade
In/Out, A.B.C.
Record Function
Record, Play
Connectors
DC IN, AUX.OUT, Phones, USB, MIC IN, Sustain
Power Supply
DC IN
Speaker
4Ω 10W + 10W
Dimensions
955 X 360 X 145mm
Weight
4.75Kg(without batteries)
+/-
* All specifications and appearances are subject to change without notice.
20
0
5
25
75
95
100
AW_M15_Manual_G07_160321
2016󾾠󾾠3󾾠󾾠21󾾠󾾠 14:45:30