KWorld PC TO TV VIDEO BOX User manual

PC TO TV
VIDEO BOX
User’s Manual
Kworld Computer Co., Ltd.
www.kworld.com.tw

KWORLDPCTOTVVIDEOBOX
Chapter 1 Introduction
The PC TO TV VIDEO BOX is a high-resolution video scan converter that converts
computer’s RGB signal into NTSC or PAL signal. No software driver is required.
Simply connect the PC TO TV VIDEO BOX to any TV or video projector for a
hyper-effective presentation.
Features
zReal time external Scan Converter for NTSC or PAL systems
zSupport for PC and Macintosh
zPlug-n-Play installation, no software driver required
zSupports resolution up to 1024*768 (60Hz) with 16.7 million colors
zSimultaneous display on PC monitor and TV
zHigh clarity 5-line anti-flicker filter
zVGA pass through function when power off
zWireless remote control access to all function
zSave settings during power-off
z200% Zoom and Pan function
zAll-inclusive output types: Composite (AV) and S-Video
Applications
zBusiness presentation
zDemonstration tape production
zEducational aid-tools
zHome entertainment
zProvide VCD and DVD video to TV
Supported Systems
zAll IBM PC compatible systems and notebooks
zMost Apple Macintosh systems and PowerBooks (with optional Mac cables)
Package content
zPC TO TV VDIEO BOX
z15 Pin Male output to 15 Pin Male and 15 Pin Female (The Y shape Cable to
connect to VGACard and Monitor)
zPower Adapter from Keyboard (AT and PS/2).
zAV cable
zSVHS cable
zUser’s manual
zRemote control (Optional)
zRGB to SCART Cable (Optional for European system)
1

KWORLDPCTOTVVIDEOBOX
Chapter 2 Installation
Picture 1. The installation diagram of the PC TO TV BOX
1. Power off your computer. Disconnect your monitor with your computer.
2. Connect the 15 Pin Male Signal Cable (Y Shaped) to the “VGA IN/OUT” on this
PC TO TV BOX.
3. Other the other side of the Signal Cable:
Connect the 15 Pin Male to the VGAPort of your PC
Connect the 15 Pin Female to the Monitor.
4. Use AV cable or S-VHS cable to connect "VIDEO OUT" or "S-VIDEO OUT"
with your TV, VCR, or Projector. "S-VIDEO OUT" will produce sharper and
brighter image. Refer to the owner's manual of your TV, VCR, or Projector for
settings to accept video from the PC TO TV BOX.
5. Turn on your computer and TV/projector.
For IBM PC Notebooks
1. Using PC TO TV BOX to convert your notebook display to the TV, you may need
to turn on the notebook's external video function. Please refer to your notebook
user manual to turn on the external video function.
2. It's best for you to use the A/C power for your notebook if you use PC TO TV BOX
to convert notebook image to TV.
2

KWORLDPCTOTVVIDEOBOX
Chapter 3 Function Description
Picture 2. The PC TO TV VIDEO BOX
After installation, you should see your computer display on your TV. To configure
your PC TO TV VIDEO BOX, you can use touch button on the unit.
Button Definition
1.”POWER” button
Power On/Off the PC TO TV BOX
2.”RESET” button
Reset the PC TO TV BOX
3.”SIZE” button
Switch the display size on TV ( support only in 640X480 display mode)
4."ZOOM" button
Switch between Normal and 200% Zoom display mode
5.Position buttons
Adjust the TV display position or pan the Zoom area in Zoom mode
3

KWORLDPCTOTVVIDEOBOX
Chapter 4 Using Remote Control
Picture 3. The Remoter
Reset: Reset PC TO TV VIDEO BOX
Sharpness: Adjust the TV display sharpness
Size: Switch the display size on TV
Position buttons: Adjust the display position or pan the Zoom area in Zoom mode
Zoom: Zoom in and zoom out
Freeze: Freeze the display video on the TV
Chapter5SwitchTVSystem
The PC TO TV VIDEO BOX supports either NTSC or PAL TV system. You can use
the TV standard switch to change the TV system. Please power off the Video before
change the setting.
Switch
Television Standard 1 2 3 4
NTSC ON ON ON OFF
NTSC-EIA ON OFF ON OFF
PAL-M ON ON OFF OFF
PLA-N OFF ON ON OFF
PAL-B/D/G/H/I OFF OFF ON OFF
PAL-combination N OFF OFF OFF OFF
RGB OUT Enable ON
4

KWORLDPCTOTVVIDEOBOX
Chapter 6 Trouble Shooting
Problems Possible solutions
Abnormal TV Display 1.Press the RESET button
2.Check the TV Standard Switch in on right position
(Please refer to Chapter 5 Switch TV System)
3.Check the Signal Cable is connected well
No Power LED light 1.Check the power adapter plug-in correctly
2.Check the power switch was pushed down.
(Power ON)
No video output 1.Check the power is on
2.Check the cable of video out is connected correctly.
3.Check the TV channel of video input is correct.
4.Check the TV Standard Switch is correct.
(Please refer to Chapter 5 Switch TV System)
5.Check the VGAcable is connected correctly.
6.If connect from notebook, check the CRT output
is enabled.
Just black/white display
on TV
Check the TV Standard Switch in on right position
(Please refer to Chapter 5 Switch TV System)
Line flicker on TV Press the “SHARP” button on Remoter to adjust.
No extra video input
connector in TV set
You may need a special adapter call RF modulator, this
device converts the composite video signal of the PC
TO TV VIDEO BOX to an antenna signal.
5