Kyocera 2035 - QCP Cell Phone Installation manual

80-B6718-6 X1 August 2000 1
Tech Tip! –
Kyocera Wireless Corp.
QCP-2035 – Quick Service Programming Instructions
Overview
This document provides quick service programming instructions for the QCP-
2035 mobile phone.
Procedures
1. Press the End/Power key (red) to
power on the phone.
2. Wait for the wake up sequence
to complete.
3. Enter 111111 (six 1s).
4. Option should be highlighted. If
it is not, use the Navigation key
to highlight it.
5. Press the Select key (star key
located in the upper right corner
above the Navigation key).
6. The Options screen displays.
7. Use the Navigation key to scroll
down to Programming.
8. Highlight Programming and
press the Select key.
9. The Security screen displays.
10. Enter the six-digit security code.
The default is 000000 (six 0s).
FYI Note:
If code has been changed or is unknown,
you cannot proceed.

QCP-2035 – Quick Service Programming Instructions Procedures
2Kyocera Wireless Corp. Proprietary 80-B6718-6 X1
11. The ESN screen appears after
the Please Waiting Reading
Service Parameters message.
12. Press the left arrow of the
Navigation key to select OK.
13. Using the keypad, enter the ten-
digit mobile phone number
assigned by the carrier.
14. Press the left arrow of the
Navigation key to select OK.
15. Enter the home system ID (SID)
of the local carrier network.
16. Press the left arrow of the
Navigation key to select OK.
17. Enter the name to be associated
with this mobile phone (personal
name, company name, etc.).
18. Press the left arrow of the
Navigation key to select OK.
19. Basic system programming is
complete.
20. Press the left arrow of the
Navigation key to select EXIT.
21. The phone powers off.

Procedures QCP-2035 – Quick Service Programming Instructions
80-B6718-6 X1 Kyocera Wireless Corp. Proprietary 3
For more information, contact:
KWC Technical Support Hotline Toll-free: 1-[phone] (US and Canada ONLY)
KYOCERA WIRELESS CORP. Direct: 1-[phone]
10300 Campus Point Drive Fax: [phone]
San Diego, CA 92121 USA E-mail: [email protected]
This technology is controlled by the U.S. Government. Diversion contrary to U.S. law prohibited.
All data and information contained in or disclosed by this document is confidential and proprietary information of Kyocera
Wireless Corp., and all rights therein are expressly reserved. By accepting this material the recipient agrees that this material
and the information contained therein is held in confidence and trust and will not be used, copied, reproduced in whole or in
part, nor its contents revealed in any manner to others without the express written permission of Kyocera Wireless Corp.
Copyright © 2000 Kyocera Wireless Corp. All rights reserved.
Printed in the United States of America.