L-TEK Dance Base MINI User manual

LTEK Dance Base MINI
for wireless pads

Dance Base MINI
#1
#2
#3
#4
HOLD BUTTON TO PAIR YOUR PAD
STATUS
BEAT/
The STATUS LED on Base MINI lights up
green after Base MINI is connected to the
computer's USB port
When StepMania is started and the L-TEK
Lights controller is selected in the LIGHTS
options, the LED starts ashing in orange
the Wheel MENU and during gameplay to
the beat of the song being played.

Dance Base MINI
#1
#2
#3
#4
HOLD BUTTON TO PAIR YOUR PAD
STATUS
BEAT/
Function 1:
Pairing new device with the Base MINI
Enabling the pairing function is possible
within up to 30 seconds after powering up the
Base MINI.
Pairing a device is made by holding one of the
4 buttons for at least 2 seconds - depending
on which devices you want to assign / pair.
After starting the pairing function, the LED
assigned to this channel (button) ashes
Within 30 seconds, turn on the Dance Pad
with buttons 3 and 4 pressed at the same time
- Arrows Up and Down on the DDR mat.
Completion of the pairing process will be
signaled by three ashes of all LEDs on the
Base MINI controller and lighting of the green
LED on the Dance Pat.
The controller and the mat are ready to work
immediately after the pairing process is
completed (device restart is not required)

Dance Base MINI
#1
#2
#3
#4
HOLD BUTTON TO PAIR YOUR PAD
STATUS
BEAT/
Function 2:
Changing Base MINI RF channel
Switching on the channel change function is
possible within up to 30 seconds after turning
on the controller.
Base MINI controller can work on one of 4
channels in ISM 2.4GHz band.
To activate the function of changing the
channel, press all 4 buttons (1+2+3+4)
simultaneously for at least 2 seconds. The
activation of the function is conrmed by
ashing of one of the #1/#2/#3/#4 LEDs,
which simultaneously signals the currently
selected channel (1-4).
Within 5 seconds after switching this function
on, you can change the channel using buttons
1-4.
The change of the channel is automatically
signaled by the ashing of the diode next to
the currently selected channel (1-4).
After 5 seconds of inactivity, all LEDs will ash
3 times and the new settings will be saved in
the device memory.
To view the channel monitoring function on
which the Base MINI controller works, press
simultaneously button 1 and button 4 for at
least 2 seconds. The activation of the function
is conrmed by ashing of one of the 1/2/3/4
LEDs, which simultaneously signals the
current operating channel (1-4). The LED
ashes as long as both buttons are pressed
(1+4)
Releasing the buttons ends the channel
preview procedure.
Dance Base MINI
#1
#2
#3
#4
HOLD BUTTON TO PAIR YOUR PAD
STATUS
BEAT/