LA CROSSE CLOCK 435-3256B-SM User manual

Model: 435-3256B-SM
DC: 111721
Page | 1Page | 4
INDOOR/OUTDOOR
LIGHTED SUN / MOON
WALL CLOCK
WARRANTY & SUPPORT
CARE & MAINTENANCE
When batteries of dierent brand or type are used together, or new and old batteries
are used together, some batteries may be over-discharged due to a dierence of
voltage or capacity. This can result in venting, leakage, and rupture and may cause
personal injury.
• Always purchase the correct size and grade of battery most suitable for the
intended use.
• Always replace the whole set of batteries at one time, taking care not to mix old and
new ones, or batteries of dierent types.
• Clean the battery contacts and those of the device prior to battery installation.
• Ensure the batteries are installed correctly with regard to polarity (+ and -).
• Remove batteries from product during periods of non-use. Battery leakage can cause
corrosion and damage to this product.
• Remove used batteries promptly.
• For recycling and disposal of batteries, and to protect the environment please check
the internet or your local phone directory for local recycling centers and / or follow
local government regulations.
This product is warranted to be free from defects in material and
workmanship under normal use and service for a period of one year from the
date of sale to the customer. Warranty will not apply to defects resulting from
abuse, accidents, or misuse. If a defect that is covered by this warranty arises
during the warranty period, promptly return the clock (postage prepaid) with
proof of purchase showing the date the clock was purchased to the following
address and such defects will be repaired, or the products will be replaced
at La Crosse Clock Company option without charge.
La Crosse Clock Company
Warranty Department
2830 South 26th Street.
La Crosse, WI 54601
For Online support visit:
www.lacrossetechnology.com/support
WARNING: This product can expose you to chemicals including acrylonitrile,
butadiene, and styrene, which are known to the State of California to cause cancer
and birth defects or other reproductive harm.
For more information go to: www.P65Warnings.ca.gov

Page | 3Page | 2
Note: The quartz movement will keep the clock running
accurately. If the clock does not operate, or steadily loses
time, replace the battery.
POWER UP CLOCK
1. Remove the round Battery Cover to access the clock’s
Battery Compartment.
2. Install the included AA battery into the center Battery
Compartment according to the polarity markings.
3. Spin the Time Set Wheel to set your time.
Learn more from our video: bit.ly/wallclock_setup
Note: For shipping purposes the battery is placed inside
the battery compartment with a plastic protection, please
remove it and install the battery correctly according to the
polarity markings.
Time Set
Wheel
Battery
Compartment AA
SPECIFICATIONS
POWER UP LIGHTED DIAL
Remove the Lighted Dial Battery Covers and insert 4 - D
batteries (not included) into the Battery Compartments.
IMPORTANT: Be sure all batteries are of the same voltage.
Light Sensor Switch
Set to ON to activate the Lighted Dial in
dark conditions. Set to OFF to deactivate
this function all together and conserve
batteries.
The Light Sensor is located on the front
of the clock between the six and seven.
The Light Timer will reset once the clock
is exposed to light. When it gets dark, the
Lighted Dial will stay on for 6 hours and
then automatically shut o.
ON/OFF Switch
OFF ON
D
D
Battery Requirements:
Clock: 1 AA (IEC LR6) (included), required in movement to
operate the Time.
Lighted Dial: 4 D (IEC LR20) (not included)
Clock Battery Life: 1 Battery - 1 year
Dimensions: 21in. (53.4cm) Diameter / 3.07in. (7.8cm) Deep
MOUNTING
Use the mounting hole on the back of the clock to securely
mount it on a wall.