La Crosse Technology 616A-56647 User manual

SET UP GUIDE
MODEL: 616A-56647
Travel Projection Alarm Clock

POWER UP
1. With the cover/stand closed, insert two AAA batteries (not included) into
the back of projection alarm. Observe correct polarity.
2. Firmly pull the cover/stand open from the top to view the clock.
3. Optional Micro-USB power cable (included) for constant, adjustable
backlight and projection. Insert the Micro-USB end of the cable into the
clock and the USB end into your computer USB port or a USB outlet.
2
Pull firmly to open
clock cover.
Micro-USB Port
(Clock Power)
Standard USB Port
(Charge Mobile Devices)
Foldout Cover/Stand
Restart:
Unplug the Micro-USB cable and remove batteries from the
projection alarm, press any button 20 times. After 15 minutes, return to
Step 1 above.

3
Important: Only press or hold one button at a time to adjust settings.
1. Hold the MODE/SET button to enter the Settings Menu.
2. Press and release the ▲UP or ▼ DOWN buttons to adjust values. Hold to
adjust quickly.
3. Press the MODE/SET button to confirm adjustments and move to the
next item.
Settings Menu Order:
• 12/24 Hour Time Format
• Hour
• Minutes
• Year
• Month
• Date
SETTINGS MENU
Weekday: Weekday will set
automatically when Year, Month
and Date are set.
ALARM
Press to view Alarm Time.
When alarm time is showing press to activate/deactivate alarm.
Hold to set Alarm.
MODE/SET Press to display Calendar or Alarm Time.
Hold to enter Settings Menu.
SNOOZE/LIGHT
Alarm Sounding: Press to silence alarm for 10 minutes.
USB Powered: Press to adjust backlight HI-LOW-OFF
Battery Powered: Press for 10 second backlight and projection.
Projection: Press to rotate image
Settings: Press to adjust values. Hold to adjust quickly.
Settings: Press to adjust values. Hold to adjust quickly.
BUTTONS

4
TIME ALARM
Set Alarm:
1. Press the ALARM button to view alarm time. While viewing, hold the
ALARM button to enter the Alarm Settings.
2. Press and release the ▲UP or ▼ DOWN buttons to adjust values.
3. Press the ALARM button to confirm and move to the next item.
Alarm Settings Order:
• Hour
• Minutes
Silence a sounding alarm: Press any button except SNOOZE/LIGHT to
silence the alarm for 24 hours.
Activate/Deactivate Alarm:
1. Press the ALARM button to view alarm time. While viewing, hold the
ALARM button to activate or deactivatethe alarm.
2. The Alarm Icon will show when alarm is active.
Snooze:
• When the alarm sounds, press the SNOOZE/LIGHT button to silence
the alarm for 10 minutes. Zz will show.
Note: The alarm will sound with increasing frequency for two minutes,
then shut off automatically if not silenced.

5
CUSTOM DISPLAY MODES
Press the MODE/SET button to switch between the Alarm Time and Calen-
dar displays.
When using Micro-USB Power:
• Press the SNOOZE/LIGHT button to adjust the backlight intensity.
• There are 2 brightness levels, plus an o option.
When using Battery Power:
• Press the SNOOZE/LIGHT button to view the Backlight and Projection
Image for 10 seconds.
•Constant backlight requires use of the included Micro-USB power cable.
ADJUSTABLE BACKLIGHT
PROJECTION
Tilt Image: The Projection Arm can tilt forward and backward helping to find
the perfect location on your wall or ceiling.
Rotate Image: Press the ▲UP button to rotate the projected image in 90°
increments.

6
Battery Power: Press the SNOOZE/LIGHT button to view the projection
image and backlight for 10 seconds.
IMPORTANT: The clock needs to be powered with the included Micro-USB
cable for a constant projection.
USB CHARGING PORT
Important: The Clock must be connected to Micro-USB Power to charge a
mobile device.
• Connect your external device’s USB charging cable (not included) to the
USB Charging Port.
• Charging times will vary.
• USB Power Output: 1 Amp maximum current.
• Charge 1A devices or devices that are self- regulating.
Note: This clock was not designed to charge tablets or other devices
requiring more than a 1A current.

7
If you require additional support, get in touch
with our friendly customer support team based
in La Crosse, WI. Our Associates are available
Mon-Fri: 8am-6pm CST
Phone: [phone]
Email: bit.ly/contact_techsupport
Self-Help: bit.ly/616a-56647
WE’RE HERE TO HELP
Power Requirements: 2 “AAA” batteries (not included)
Optional: Micro-USB Power Cord (included)
Battery Life: Over 6 months
Dimensions:
Open: 4.5” L x 3” W x 3” H (114.3 x 76.2 x 76.2 mm)
Closed: 4.5”L x 0.94” W x 3” H (114.3 x 24 x 76.2 mm)
SPECIFICATIONS
Scan for Self-Help
This product can expose you to chemicals including acrylonitrile, butadiene, and
styrene, which are known to the State of California to cause cancer and birth
defects or other reproductive harm.
For more information, go to: www.P65Warnings.ca.gov
CA WARNING:

8
La Crosse Technology, Ltd. provides a
1-year limited time warranty (from date
of purchase) on this product relating to
manufacturing defects in materials &
workmanship.
La Crosse Technology, Ltd,
2830 S. 26th St.
La Crosse, WI 54601
For Full Warranty Details, Visit:
www.lacrossetechnology.com/pages/warranty
Patents:
www.lacrossetechnology.com/patents
Battery replacement instruction:
When batteries of dierent brand or
type are used together, or new and old
batteries are used together, some batteries
may be over-discharged due to a dierence of
voltage or capacity. This can result in venting,
leakage, and rupture and may cause personal
injury.
• Always purchase the correct size and grade of
battery most suitable for the intended use.
• Always replace the whole set of batteries at
one time, taking care not to mix old and new
ones, or batteries of dierent types.
• Clean the battery contacts and those of the
device prior to battery installation.
• Ensure the batteries are installed correctly with
regard to polarity (+ and -).
• Remove batteries from product during periods
of non-use. Battery leakage can cause
corrosion and damage to this product.
• Remove used batteries promptly.
• For recycling and disposal of batteries, and
to protect the environment please check
the internet or your local phone directory for
local recycling centers and/ or follow local
government regulations.
WARRANTY
BATTERY INSTRUCTIONS
Ask questions, watch setup videos, and
provide feedback on our social media
outlets.
Follow La Crosse Technology on You-
Tube, Twitter, Facebook and Instagram.
STAY IN TOUCH

9
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
( 1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form, even in part, or duplicated or
processed using electronic, mechanical or chemical process without the written permission of the publisher.
This booklet may contain errors or misprints. The information it contains is regularly checked and corrections
are included in subsequent editions. We disclaim any responsibility for any technical error or printing error,
or their consequences. All trademarks and patents are recognized.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of
the device.
FCC STATEMENT
CANADA STATEMENT
Designed in La Crosse, Wisconsin •Made in China •Printed in China •DC022222