La Crosse Technology Payton 404-3015CC User manual

15-Inch Indoor/Outdoor
Payton Wall Clock
Model: 404-3015CC
DC: 081622
This product is warranted to be free from defects in material and workmanship under
normal use and service for a period of two years from the date of sale to the customer.
Warranty will not apply to defects resulting from abuse, accidents, or misuse. If a defect
that is covered by this warranty arises during the warranty period, promptly return
the clock (postage prepaid) with proof of purchase showing the date the clock was
purchased to the following address and such defects will be repaired, or the products
will be replaced at
La Crosse Clock Company option without charge.
La Crosse Clock Company
Warranty Department
2830 South 26th Street.
La Crosse, WI 54601
For online support visit: bit.ly/contact_techsupport
Patents: www.lacrossetechnology.com/pages/patent
WARRANTY & SUPPORT
Made in China - Printed in China
This product can expose you to chemicals including acrylonitrile, butadiene, and
styrene, which are known to the State of California to cause cancer and birth defects or
other reproductive harm. For more information go to: www.P65Warnings.ca.gov
CA WARNING:
Battery Requirements: 1 AA (IEC, LR6, 1.5V) required in the
Battery Compartment (Alkaline recommended)
Battery Life: 12 months
Temperature Range: 0ºF to 120ºF
Humidity Range: 10% RH to 90% RH
Dimensions: 15” x 2.12”
SPECIFICATIONS

CARE & MAINTENANCE
Battery replacement instruction:
When batteries of dierent brand or type are used together, or new and old batteries
are used together, some batteries may be over-discharged due to a dierence of
voltage or capacity. This can result in venting, leakage, and rupture and may cause
personal injury.
• Always purchase the correct size and grade of battery suitable for the intended use.
• Always replace the whole set of batteries at one time, taking care not to mix old and
new ones, or batteries of dierent types.
• Clean the battery contacts and those of the device prior to battery installation.
• Ensure the batteries are installed correctly with regard to polarity (+ and -).
• Remove batteries from product during periods of non-use. Battery leakage can cause
corrosion and damage to this product.
• Remove used batteries promptly.
• For recycling and disposal of batteries, and to protect the environment please check
the internet or your local phone directory for local recycling centers and / or follow
local government regulations.
THERMOMETER / HYGROMETER
POWER UP
1. Insert 1 fresh AA alkaline battery, according to polarity, into the
snug Battery Compartment.
2. Rotate the Time Set Wheel to set the time.
3. Mount on a wall and enjoy!
Note: The quartz movement
will keep the clock running
accurately. If the clock does not
operate, or steadily loses time,
replace the battery.
Time Set
Wheel
Battery
Compartment
AA
Learn more from our video: bit.ly/wallclock_setup
MOVEMENT COVER
1. OPEN: Turn the cover counterclockwise until the head is aligned
with the arrow. Then lift the cover o the clock.
2. CLOSE: Place the cover in the open position. Then turn it clock
wise until the head is back on top, directly under the hanger hole.
MOUNTING
Indoor: Mount the clock on a wall using the hanging hole on the back.
Outdoor: Choose a location with an overhang to protect the clock from
the overhead sun or standing snow or rain. A shaded location will
prevent inaccurate temperature readings. Mount the clock on a wall
using the hanging hole on the back.
CLOSE
OPEN
OPEN
CLOSE
OPEN
CLOSE
• Your thermometer and hygrometer have been pre-calibrated and
should not need adjustment.
• Before manually adjusting your sensors, allow the clock to sit for at
least 2 hours in the same location.
• To manually adjust your sensors, gently turn the temperature or
humidity sensor adjustment on the back of the clock until desired
setting is reached.