La Crosse Technology 060414 User manual

WS-9245BK-IT www.lacrossetechnology.com/support Page | 1
Model: WS-9245BK-IT
Instruction Manual
DC: 060414
Wireless Temperature Station
Get Started
Step 1: Insert 2 fresh AAA, LR3 1.5 volt batteries into the
TX40U-IT sensor according to polarity markings.
Step 2: Insert 2 fresh AA, LR6 1.5 volt Alkaline batteries
into the temperature station according to the
polarity markings.
Restart: If the outdoor temperature is not displayed after
3 minutes, remove batteries from the temperature station
and outdoor sensor. Press any button on the temperature
station 20 times. After 15 minutes, return to Step 1
above.
Battery
Cover
TX40U-IT
Sensor
2 -AAA
batteries
Buttons
Removable Stand
Hanging hole
Battery compartment
2 “AA” Batteries
Outdoor Temperature
+ MIN/MAX
temperature
Buttons
Indoor Temperature
+ MIN/MAX
temperature
Time
SET
+
Note: This station reads in °F
and 12 hour time format only.

WS-9245BK-IT www.lacrossetechnology.com/support Page | 2
Set Time
1. Hold the SET button and the hour will flash. Press the
+button to set the hour.
2. Press the SET button and the minutes will flash. Press
the +button to set the minutes. Press the SET button
to exit.
MIN/MAX Readings
The minimum and maximum temperatures are from
setup, until you reset the min/max temperatures or
remove the batteries from the station.
For a 24-hour min/max reading: reset the min/max
temperatures at the same time each day.
Reset: Hold the + button for 3-5 seconds to reset all
the min/max values to current temperature.
Low Battery Icon
When the low battery icon is displayed above
the outdoor temperature, replace batteries in the
outdoor sensor.
When the low battery icon is displayed above the
indoor temperature, replace batteries in the
temperature station.
Position Outdoor Sensor
Mount the outdoor sensor on a north-facing wall or in
any well shaded area. Under an eave or deck rail is
preferred.
The maximum transmitting range to the temperature
station is over 200 feet (60 meters) in open air, not
including walls.
Low
Battery
Icon

WS-9245BK-IT www.lacrossetechnology.com/support Page | 3
Specifications
Indoor:
Temperature Range:
14.5°F to +139.5°F
-9.9ºC to +37.7ºC
Outdoor:
Temperature Range:
-39.8°F to +139.8°F
-39.9ºC to +59.9ºC
Distance:
Over 200 ft. (60 meters)
RF 915MHz (open air)
Interval:
About every 4 seconds
Power:
Temperature station
3-AA, IEC, LR6 batteries
(not included)
TX40U-IT Sensor:
2-AA, IEC, LR6 batteries
(not included)
Battery Life:
Temperature station
Over 24 months
TX40U-IT Sensor:
Over 12 months
Dimensions:
Temperature station :
5.6“ x 1.4“ x 3.6“
(142.2 x 35.6 x 91.4mm)
TX40U-IT Sensor:
5.05” x 1.50” x 0.83”
(128.3 x 38.2 x 21.2 mm)
Care and Maintenance
Do not mix old and new batteries
Do not mix Alkaline, Standard, Lithium or Rechargeable
Batteries
Do not expose to extreme temperature, vibration or shock.
Clean with a soft damp cloth. Do not use solvents.
The clock is not a toy. Keep it out of reach of children.
The clock is not to be used for medical purpose or for public
information. It is intended for home use only.
The specifications of this product may change without prior notice.
Improper use or unauthorized opening of housing voids warranty.

WS-9245BK-IT www.lacrossetechnology.com/support Page | 4
Warranty and Support Information
La Crosse Technology, Ltd. provides a 1-year limited time warranty
(from date of purchase) on this product relating to manufacturing
defects in materials & workmanship.
View full warranty details online at:
www.lacrossetechnology.com/warranty_info.pdf
For warranty work, technical support or other information
contact:
La Crosse Technology, Ltd
2830 26th Street S.
La Crosse, WI 54601
Contact Support:
1-608-782-1610
Online Product Support:
www.lacrossetechnology.com/support
Product Registration:
www.lacrossetechnology.com/support/register
Protected under U.S. Patents:
5,978,738 / 6,076,044 / 6,597,99
FCC Statement
This Device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) the device must accept any interference
received, including interference that may cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR
TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO
THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER
AUTHORITY TO OPERATE THE EQUIPMENT
All rights reserved. This handbook must not be reproduced in any
form, even in excerpts, or duplicated or processed using electronic,
mechanical or chemical procedures without written permission of the
publisher.
This handbook may contain mistakes and printing errors. The
information in this handbook is regularly checked and corrections
made in the next issue. We accept no liability for technical mistakes or
printing errors, or their consequences.