La Crosse Technology Bonus Station User manual

BONUS STATION
LTV-D2

Initial Setup
Power Up
Note: It may take up to 10 minutes for the sensor data to appear on your stations’ screens.
Bonus Station: Install 2 fresh “AAA” batteries according to polarity and replace battery cover.
Back of Bonus Station
(LTV-D2)
Bonus Station Settings
When the station is first powered on, it will begin searching for the included
Thermo-Hygro Sensor, which should connect within the first 10 minutes.
Navigating the Settings Menu
Front of Station
Hold the SET/IN-OUT button to enter the
Settings Menu.
1.
Use the +/SEARCH button to adjust the
values.
2.
Press the SET/IN-OUT button to confirm
your selection & move to the next setting.
3.
Settings Menu Order
12/24 Hour Time Format • Hour • Minutes • Temperature Units (Fahrenheit/Celsius)

Search for Outdoor Sensor
Your indoor/outdoor temperature and humidity readings share the same section on the LCD.
Press the SET/IN-OUT button to view either Indoor or Outdoor Readings.
Accessing Indoor/Outdoor Readings
• If the signal is lost, the station will display the last data recorded for 10 minutes. After 10
minutes, the station will display dashes “--”. After 30 minutes, the station will automatically
start searching for the sensor.
• Hold the +/SEARCH button to manually search for the outdoor sensor. The Reception Icon
will animate while searching and be solid when signal is received.
OUTDOOR
OUTDOOR OUTDOOR OUTDOOR
12/24 Hour Fahrenheit/CelsiusMinutesHour

Viewing Temperature & Humidity Data
Station Buttons
SET/IN-OUT
Press to view indoor or outdoor readings.
Hold to enter settings menu.
+/SEARCH
Hold to search for sensor. While in the settings
menu, press and/or hold to increase values.
1. INDOOR ICON ( )
2. OUTDOOR ICON ( )
3. SENSOR RECEPTION INDICATOR ( )
4. SENSOR LOW BATTERY INDICATOR ( )
10.STATION LOW BATTERY INDICATOR ( )
5. INDOOR OR OUTDOOR TEMPERATURE
7. INDOOR OR OUTDOOR HUMIDITY
6. TEMPERATURE TREND INDICATORS
8. HUMIDITY TREND INDICATORS
9. TIME DISPLAY
Indicates you are viewing indoor readings
Indicates you are viewing outdoor readings
Indicates if the station is receiving data from
the sensor
Indicates batteries in the sensor should be
replaced soon
Indicates batteries in the station should
be replaced soon
Current indoor or outdoor temperature
(based on setting)
Current indoor or outdoor humidity
(based on setting)
Represents changes in temp. over the past hour
Represents changes in humidity over the past hour
Current time in 12 or 24-hour format

Specifications
BONUS STATION SPECIFICATIONS (LTV-D2)
• Indoor Temperature Range: 32°F to 122°F
(0°C to 50°C)
• Indoor Humidity Range: 10 to 99%RH
• Power Requirements: 2 “AAA” Batteries
(not included)
• Dimensions:
2.64 in. L x 1.32 in. W x 3.62 in. H
(6.7 cm L x 3.35 cm W x 9.19 cm H)
California Residents
WARNING: This product can expose you to chemicals
including acrylonitrile, butadiene, and styrene, which are
known to the State of California to cause cancer and birth
defects or other reproductive harm.
For more information, go to: www.P65Warnings.ca.gov
Follow La Crosse Technology on Facebook,
Instagram, YouTube, and Twitter.
Stay in Touch
Ask questions, watch setup videos, and provide
feedback on our social media outlets.
Having Trouble?
We’re here to help.
Use the links below to find additional
resources or reach out to our sta directly.
Self-Help: bit.ly/ltv-d2_support
Online: bit.ly/contact_techsupport
Phone: [phone]
Representatives are available Monday-Friday,
8am-6pm CST
Scan for more information:
Warranty
La Crosse Technology, Ltd. provides a 1-year limited time
warranty (from date of purchase) on this product, relating to
manufacturing defects in materials and workmanship.
For full warranty details, visit:
www.lacrossetechnology.com/support
La Crosse Technology, Ltd.
2830 S. 26th Street, La Crosse, Wisconsin 54601

FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set
forth for an uncontrolled environment and it also complies with
Part 15 of the FCC RF Rules. This equipment must be installed
and operated in accordance with provided instructions and the
antenna(s) used for this transmitter must be installed to provide
a separation distance of at least 20 cm from all persons and
must not be co-located or operating in conjunction with any
other antenna or transmitter. End-users and installers must be
provided with antenna installation instructions and consider
removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Caution: Any changes or modifications not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment.
Canada Statement
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
• Reorient or relocate the receiving antenna.
• Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician
for help.
The device meets the exemption from the routine
evaluation limits in section 2.5 of RSS 102 and compliance
with RSS-102 RF exposure, users can obtain Canadian
information on RF exposure and compliance. This transmitter
must not be co-located or operating in conjunction with
any other antenna or transmitter. This equipment should
be installed and operated with a minimum distance of
20 centimeters between the radiator and your body.