La Crosse Technology WS-9066U-IT User manual

Model: WS-9066U-IT www.lacrossetechnology.com/support pg. 1
Model: WS-9066U-IT
Instruction Manual
DC: 051716
Wireless Weather Station with Moon Phase
Contents
Initial Setup..............................................................................................2
Moon Phase.............................................................................................2
Buttons.....................................................................................................2
LCD Features...........................................................................................3
Settings Menu..........................................................................................3
MIN/MAX Temperature Readings ..........................................................4
Position Outdoor Sensor........................................................................4
Care & Maintenance................................................................................4
Specifications..........................................................................................5
Warranty and Support Information .......................................................5
FCC Statement.........................................................................................6

Model: WS-9066U-IT www.lacrossetechnology.com/support pg. 2
Initial Setup
Step 1:Insert 2 AAA batteries into the TX45UTH-IT outdoor sensor.
Step 2:Insert 2 AAA batteries into the weather station.
Step 3:Wait 5 minutes for sensor to lock in. Place sensor outside in a
shaded location.
Note: If the outdoor temperature is not displayed after 3 minutes, remove
batteries from the sensor and the station for 15 minutes and start again
from step 1.
Moon Phase
The moon icon of the weather station will display all 8-moon phases.
A bar segment above the moon phase will indicate current moon phase.
Buttons
+
SET
Bar segment (moon
phase indicator)
New
Moon
Waning
Crescent
First
Quarter
Waxing
Gibbous
Waxing
Crescent
Last
Quarter
Full
Moon
Waning
Gibbous

Model: WS-9066U-IT www.lacrossetechnology.com/support pg. 3
LCD Features
1- Manual set
time 2- Month/Date 3- Moon
Phase
Indicator
4- Moon
Phase
5- Indoor
Temperature
6- Low
Battery-
Station 7-Indoor Icon 8- Indoor
Humidity
9- Outdoor
Temperature
10
- Low
Battery-
Sensor
11-Sensor
Reception
Icon
12-Outdoor
Humidity
Settings Menu
1. Hold the SET button for three seconds to enter setting mode.
2. Press and release the + button to change a value.
3. Press and release the SET button to confirm a setting and move to
the next item.
Setting order:
1. 12/24 hour time format
Note: Displays date/month (24h time display) or month/date (12h
time display)
2. Hours
3. Minutes
4. Year
1
2
4
3
6
7
8
9
10
11
12
5

Model: WS-9066U-IT www.lacrossetechnology.com/support pg. 4
5. Month
6. Date
7. Fahrenheit/Celsius
MIN/MAX Temperature Readings
The minimum and maximum temperatures are recorded from the power
up of the temperature station until you reset the values. Reset daily, if
you want a 24-hour MIN/MAX reading.
View: Press the MIN/MAX button to view:
Indoor minimum, indoor maximum, outdoor minimum and outdoor
maximum temperature readings.
Reset: Hold MIN/MAX button for three seconds to reset all the indoor
and outdoor temperature to current temperatures.
Position Outdoor Sensor
•Mount the Outdoor Sensor on a north-facing wall or in any well
shaded area. Under an eave or deck rail is preferred.
•The maximum wireless transmission range to the alarm clock is over
260 feet (80 meters) in open air, not including walls or floors.
•Be sure the outdoor sensor is mounted vertically.
Restart: When the outdoor readings show dashes:
1. Bring the sensor in the house five feet from the weather station.
2. Remove batteries from the sensor, and the batteries from the
weather station.
3. Press any button 20 times.
4. After 15 minutes insert batteries into the sensor, as well as batteries
into the weather station.
5. Wait 15 minutes to establish a strong connection. Place sensor
outside in shaded location.
Care & Maintenance
•Do not mix old and new batteries
•Do not mix Alkaline, Standard, Lithium or Rechargeable Batteries
•Always purchase the correct size and grade of battery most suitable
for intended use.
•Replace all batteries of a set at the same time.
•Clean the battery contacts and also those of the device prior to
battery installation.
•Ensure the batteries are installed with correct polarity (+and -).

Model: WS-9066U-IT www.lacrossetechnology.com/support pg. 5
•Remove batteries from equipment which is not to be used for an
extended period of time.
•Remove expired batteries promptly.
•The specifications of this product may change without prior notice.
•Improper use or unauthorized opening of housing voids warranty.
Specifications
Indoor Range: 14.1°F to +139.8°F (“OF.L” if outside this range)
Outdoor Range: -39.8°F to +139.8°F (“OF.L” if outside this range)
Indoor Humidity: 20% to 95%
Outdoor Humidity: 1% to 99%
Indoor Temp Update: every 16 seconds
Indoor Humidity Update: every 64 seconds
Outdoor Temp & Humidity: every 4 seconds
Transmission Range: up to 260 feet (80 meters) (open space)
Weather Station: 2-AAA,IEC LR3, 1.5V not included
TX45UTH-IT: 2-AAA, IEC LR3, 1.5V not included
Battery life: up to 12 months
Dimensions (W x D x H):
Weather Station: 3.22” W x 0.78” D x 5” H (81.8 x 20 x 127.1mm)
TX45UTH-IT: 1.41” W x 0.62”D x 4.03” H (36 x 16 x 102.6mm)
Warranty and Support Information
La Crosse Technology, Ltd. provides a 1-year limited time warranty (from
date of purchase) on this product relating to manufacturing defects in
materials & workmanship.
Before returning a product, please contact our friendly customer
support with questions or visit our online help (manuals and FAQS):
Phone: [phone]
Online Product Support: www.lacrossetechnology.com/support
Product Registration:
www.lacrossetechnology.com/support/register
View full warranty details online at:
www.lacrossetechnology.com/warranty_info.pdf
Warranty Address: Protected under U.S. Patents:
La Crosse Technology, Ltd 5,978,738 | 6,076,044 |RE43903
2830 S. 26th St.
La Crosse, WI 54601

Model: WS-9066U-IT www.lacrossetechnology.com/support pg. 6
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for
help.
This device must not be co-located or operating in conjunction with any
other antenna or transmitter.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV interference
caused by unauthorized modifications to this equipment. Such
modifications could void the user authority to operate the equipment.
All rights reserved. This manual may not be reproduced in any form,
even in part, or duplicated or processed using electronic, mechanical or
chemical process without the written permission of the publisher.
This booklet may contain errors or misprints. The information it contains
is regularly checked and corrections are included in subsequent editions.
We disclaim any responsibility for any technical error or printing error, or
their consequences.
All trademarks and patents are recognized.