
ULTRASCULPT MINI
DEVICE MODES
03
BRIGHTEN SKIN MODE
Uses LED Red Light and RF technology. The LED light activates the skin cells. Promoting cell metabolism,
evening skin tones, and tightening the skin. A perfect environment for the RF heat to maximize its fat
burning and body shaping magic.
Note: This mode is the default mode when booting on the machine. It has three levels of intensity.
Slow bursts, rapid succession bursts, and lastly an always on option. Adjust based on your sensitivity.
Uses LED Red Light, RF technology, and mechanical Vibration. Using all three of these methods you
take advantage of the cell metabolism and skin tightening from the LED lights in tandem with the
Mechanical vibrations and RF heat gives the best environment to sculpt away those stubborn deposits
Note: This mode has three levels of intensity. Fast short bursts of light and vibrations, Slow bursts of LED
with long intermittent vibrations, and lastly constant LED lights with long intermittent mechanical vibrations.
Adjust based on your sensitivity.
Utilizes both mechanical vibration and ultrasonic CV. Takes advantage of both technologies to loosen fat
deposits and sculpt and tighten skin.
Note: This mode has three levels of intensity. Intermittent mechanical short vibrations. Intermittent mechanical
long vibrations and mechanical long vibrations.
FAT BURNING MODE
This utilizes both LED Red Light and Ultrasonic cavitation to loosen stubborn fat pockets, improve skin
color and elasticity. Both LED and CV promote cell metabolism giving your skin the perfect push in the
right direction! This mode only has one level of intensity.
DEVICE MODES
HIGH BURST FAT MODE
SHAPING MODE
Each treatment mode has a max time limit of fifteen minutes