Lafalink LF-AC300 User manual

Wireless LAN Controller
AP AP AP
Operation Mode
LF-AC300 can be using as gateway mode with one WAN portand 4 LAN ports, it can
recongnize the APs connect to the gateway, and then managed AP form PC.
Gateway Mode

10.1
10
Gateway
AP AP AP
Without changing the existing network infrastructure, easy deployment,
LF-AC300 can be using as Centralized WLAN management by pass, o the Gateway mode
of the device with all 5 LAN ports.
Gateway Mode
10.1

A. Single AP’s Setting
Device List: Current management of the equipment list, to manage the connection
to the equipment management platform
Device Group: The creation and management of wireless equipment grouping wireless
parameters, the same group of devices of the same, can carry on the
management to the wreless device in a packet.
Device Log: Display trace settings for wireless device.
Address Server: Provide address service for the wireless AP to access the wireless
management platform, automatically assigned IP address.
Intelligent Gateway: Advanced setting for wirelessmanagement platform.
LF-AC300 can discovery Access Point auto, select the for one AP, here we can
setting the location and name of APs
click the Button, you can get the
windows of setting as the picture right.
- Device Status
- Device Network
- Wireless Basic
- Wireless Advanced.
- Device Network
- Wireless Basic
Here change the IP Setting of AP, DHCP means get the IP addres form LF-AC300,
Static IP means setting the IP manully.
Click the wireless basic item, here we can setting the SSID and security of AP, which
AP support 4 SSIDs, and you can also type in the VLAN ID, which means binding with SSID.

B. Multiple APs’ Setting
Batch Set: Batch set selected AP channel and transmit power
- Wireless Advanced
Wireless advanced setting of output power, Coverage Threshold or Max Station limit.
- Channel Setting and Output Power
Select one AP, click the Batch Set below, change the channel and output power
Device Group: The creation and management of wireless equipment grouping wireless
parameters, the same group of devices of the same, can carry on the
management to the wreless device in a packet.
1. Click New Button to establish a new group, then setting the Group Name, SSID, secruty
and wireless parameters of this group.
2. Click Plus Button to add the AP into the Group, then the APs will setting to same with
the group setting below.

Address Server: Provide address service for the wireless AP to access the wireless
management platform, automatically assigned IP address.
Setting the server IP Address of LF-AC300, and DHCP Address Pool. This IP
address is dierent with LAN IP address of LF-AC300.
Intelligent Gateway: Advanced setting for wirelessmanagement platform.
You can change the WAN setting of devices, disable or PPPoE adsl type.