www.lambario.comwww.lambario.com
MANUAL PËRDORIMI
AL Udhëzimet e përdorimit
Technical parameters
● Working temperature: -20-60 ℃
● Voltage supply: 12V-24V
● Output: 3 channels
● Connecting mode: common anode
● Net weight: 50g
Function model:20 models.
● Static power consumption: <1 W
● Output current: <2 A (each channel)
● Output power: 72W
Direction for use
1. Connect the load wire at first, following by the power wire; Please ensure short circuit can’t occur between
connecting wire before you turn on the power;
2. Standard color changes as follows:
Brightness +( 16 in all )
Brightness-( 16 in all )
Off
On
Static red Static green
Static blue
Static white
Static orange
Static pea green
Static dark blue
7 color jumpy change/7
color fade change
Static dark yellow
Static cyan
Static brown
White color shrobe
flash
Static yellow
Static light blue
Static pink
All color fade change
Static straw yellow
Static sky blue
Static purple 3 base color jumpy
change/ 3color fade
change
Direction: ①When switching to dynamic modes the button of “Brightness +”/ “Brightness -” means the speed of light
change is up/ down, there are 100 step in all.
②The FADE and SMOOTH all have two modes, which are “3 base colors jumpy/7 colors jumpy” and “3
base colors fade/7 colors fade”, you can press one more time to change it.
③when press FADE and SMOOTH, the “FLASH” and “STROBE” key are invalid.
④When in the static modes, press the “FLASH” /“STROBE” key, the mode will change to be “ the single
color Stroboflash/ Gradual changing”.
Model No: LY-
Model Name: LAMBARIO-IR-RGB CONTROLLER
