Lancom 1783VAW User manual

Power
When connecting the
cable to the device, turn
the bayonet connector
90° clockwise until it
clicks into place.
Use only the supplied
power adapter.
4
Please observe the
following when setting
up the device
aFor devices to be
operated on the
desktop, please attach
the adhesive rubber
footpads
aDo not rest any objects
on top of the device and
do not stack multiple
devices
aKeep the ventilation
slots on the side of
the device clear of
obstruction
aIn case of wall
mounting, use the
drilling template as
suppliedn
aRack installation with
the optional LANCOM
Rack Mount (not
supplied)
LANCOM1681V
Power
VDSL
Online ETH1
ETH2 VPN ETH3 ETH4
ISDNStatus
VDSL / ADSL interface
Use the supplied DSL cable
for the IP-based line to
connect the VDSL / ADSL
interface and the provider’s
telephone socket. For more
information, please contact
your Internet service
provider.
LANCOM, LANCOM Systems and LCOS are registeredtrademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice. No liability for technical errors and/or omissions. 111634/0617
TECHNICAL DETAILS
Hardware
Power supply 12 V DC, external power adapter (230 V); bayonet connector to secure against disconnection
Power consumption Max. ca. 14 W
Environment Temperature range 0–35 °C, humidity 0–95 %; non-condensing
Housing Robust synthetic housing, rear connectors, ready for wall mounting, Kensington lock;
measures 210 x 45 x 140 mm (W x H x D)
Number of fans None; fanless design, no rotating parts, high MTBF
Interfaces LANCOM 1783VAW over ISDN / over POTS
WAN: VDSL2 AVDSL2 as per ITU G.993.2; proles 8a, 8b, 8c, 8d, 12a, 12b, 17a
ACompatible to VDSL2 from Deutsche Telekom AG (only over ISDN)
AADSL conformity according to:
ADSL2+ over ISDN as per ITU G.992.5 Annex B/J with DPBO (POTS: Annex A/Annex M),
ADSL2 over ISDN as per ITU G.992.3 Annex B (POTS: Annex A/L),
ADSL over ISDN as per ITU G.992.1 Annex B (POTS: Annex A)
ASupports just one virtual connection at a time in ATM (VPI-VCI pair)
Wi-Fi AFrequency band: 2400-2483.5 MHz (ISM) or 5150-5825 MHz (restrictions vary between countries)
ARadio channels 2.4 GHz: Up to 13 channels, max. 3 non-overlapping (2.4-GHz band)
ARadio channels 5 GHz: Up to 26 non-overlapping channels (channels available vary according to
country regulations; DFS for automatic dynamic channel selection required)
ETH 4 individual ports, 10 / 100 / 1000 Mbps Gigabit Ethernet, by default set to switch mode.
Up to 3 ports can be operated as additional WAN ports. Ethernet ports can be electrically disabled in
the LCOS conguration.
USB USB 2.0 hi-speed host port for connecting USB printers (USB print server), serial devices (COM-port
server) or USB drives (FAT le system)
ISDN 1 / ISDN 2 ISDN 1: Internal (NT) or external (TE) ISDN bus. This feature is controlled by LCOS. According to the
settings, connect the light-blue ISDN cable either to the NTBA or the ISDN terminal device.
ISDN 2: Internal (NT) ISDN bus. Use the light-blue ISDN cable to connect the ISDN device to the ISDN
interface;
Analog 1 / Analog 2 Usethe cable of your analog devices to connect them with the analog interfaces. If necessary, use the
enclosed adapter.
Cong (Com) / V.24 Serial conguration interface / COM-port (8-pin mini-DIN): 9,600 - 115,200 baud, suitable for optio-
nal connection of analog/GPRS modems. Supports internal COM-port server and provides transparent
asynchronous serial-data transfer via TCP.
WAN protocols
VDSL, ADSL, Ethernet PPPoE, PPPoA, IPoA, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and IPoE (with or without DHCP), RIP-
1, RIP-2, VLAN, GRE, EoGRE, L2TPv2 (LAC or LNS), IPv6 over PPP (IPv6 and
IPv4/IPv6 dual stack session), IP(v6)oE (autoconguration, DHCPv6 or static)
ISDN DSS1 (Euro-ISDN), PPP, X75, HDLC, ML-PPP, V.110/GSM/HSCSD
Declaration of Conformity
Hereby, LANCOM Systems declares that this radioequipment is in compliance with Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address: www.lancom-systems.com/ce/
Package content
Manual Quick Reference Guide (DE/EN), Installation Guide (DE/EN)
Cable 1 Ethernet cable, 3 m (kiwi colored connectors); 1 DSL cable for an IP-based line, 4.25 m;
1 ISDN cable, 3 m (light-blue connectors)
Adapters 2 TAE adapters (RJ11 - TAE)
Power adapter External power supply adapter (230 V); NEST 12 V / 1.5 A DC/S; barrel connector 2.1 / 5.5 mm
bayonet; LANCOM Art.-Nr. 111301 (EU,230 V); LANCOM Art.-Nr. 111302 (UK, 230 V)
MOUNTING AND CONNECTING THE DEVICE
i VPN
Off VPN connection inactive
Green, permanently VPN connection active
Green, ashing VPN connecting
e ISDN
Off Interface deactivated
Green, permanently D-channel active
Green, ickering ISDN data transfer
Red, ickering ISDN transfer error
Red/orange, blinking ISDN hardware error
a Power
Off Device switched off
Green, permanently* Device operational, resp. device paired /
claimed and LANCOM Management Cloud
(LMC) accessible
Green/red, blinking No password set. Without a password
the conguration data in the device is
unprotected.
Red, blinking Charge or time limit reached
1x green inverse
blinking*
Connection to the LMC active, pairing OK,
device not claimed
2x green inverse
blinking*
Pairing error, resp. LMC activation code
not available
3x green inverse
blinking*
LMC not accessible, resp. communication
error
b Online
Off WAN connection inactive
Green, permanently WAN connection active
Red, permanently WAN connection error
c DSL
Off Interface deactivated
Green, permanently DSL connection active
Green, ickering DSL data transfer
Red, ickering DSL transfer error
Red/orange, blinking DSL hardware error
Orange, blinking DSL training
Orange, permanently DSL sync
Green, blinking DSL connecting
d Analog
Off Interface deactivated
Green, permanently Interface activated
Orange, blinking Incoming call
Green, blinking Connection active
h VoIP
Off No SIP accounts dened or VCM is off
Green, permanently All dened and active SIP accounts (outgoing)
were successfully registered
Red, permanently Not all of the dened and active SIP accounts
were registered (possibly still in process)
Red or green,
inverse ashing
Number of currently used lines
(connecting or connected)
f ETH
Off No networking device attached
Green, permanently Connection to network device operational,
no data trafc
Green, ickering Data transmission
g WLAN
Off No Wi-Fi network dened or Wi-Fi module
deactivated. The Wi-Fi module is not
transmitting beacons.
Green, permanently At least one Wi-Fi network is dened and
Wi-Fi module activated. The Wi-Fi module
is transmitting beacons.
Green, blinking DFS scanning or other scan procedure
j Reset
Reset switch Operated e.g. with a paper clip
short press > Restart the device
long press > Reset the device
Analog interface
Connect analog terminal
devices to the analog
interfaces either directly
via RJ11 or with the help
of the enclosed TAE
adapter.
Serial interface
Conguring the device
via the serial interface
requires a serial
conguration cable
(available as an
accessory).
ISDN interface
ISDN 1
Internal (NT) or
external (TE) ISDN bus.
This feature is controlled
by LCOS.
ISDN 2
Internal (NT) ISDN-bus.
A 100-Ohm resistor for
line termination is
switchable in LCOS.
USB interface
You can use the USB
interface to connect
a USB printer or a
USB drive.
Ethernet interface
Use the cable with
the green-colored
connectors to connect
one of the interfaces
ETH 1 to ETH 4 to your
PC or a LAN switch.
bcd e f g
a
LANCOM 1783VAW
Quick Reference Guide
Cloud-ready
LANCOM 1783VAW
DSL
ETH 2
Power
ETH 1 Online
ISDN 1
ETH 4 ETH 3 VPN
Analog 1 Analog 2 ISDN 2
WLAN
Reset
VoIP
a c eb gfd ih j
*) The additional power LED statuses are displayed in 5-seconds
rotation if the device is congured to be managed by the LANCOM
Management Cloud.
This product contains separate open-source software components which are subject to their own licenses, in particular the
General Public License (GPL). The license information for the device rmware (LCOS) is available on the device‘s WEBcong
interface under “Extras > License information“. If the respective license demands, the source les for the corresponding software
components will be made available on a download server upon request.
Gigabit Ethernet 10/100/1000
ISDN 1 ISDN 2
TE / NT NT
Analog 1Analog 2
VDSL / ADSL
a b c d e f g