Rotary Cutters, Folding Deck
Features and Benefits
Designs, specifications, features and information are subject to change without notice.
74
RCR3515 & RCRM3515 Models
Features Benefits
Surpassed rugged
industry standards All Land Pride Rotary Cutters have been designed and tested and meet rigorous
voluntary testing procedures specified by ANSI.
Mostly factory assembled Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.
5 Year gearbox warranty Shows confidence in gearbox integrity.
Gearbox seal protection Gearbox bottom seal protection for longer bearing life.
160 HP splitter gearbox High gearbox rating for handling jobs suited for this Rotary Cutter.
110 HP center & wing gearboxes High gearbox rating for 2" cutting capacity.
540 or 1000 RPM PTO speed Fits wide variety of tractors in the 50 to 160 HP range.
4 Gearboxes vs. 3 Spreads overall weight out and evenly disburses horsepower to each spindle.
Low tongue weight Ideal for smaller HP tractors by reducing the amount of weight on the drawbar.
Narrow tongue construction Allows for a tighter turning radius.
Round back design Allows for more efficient handling and dispersing of material.
Input Driveline: Cat. 5 CV Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint
allows for 80 degree turns without doing damage to the driveline.
Wing driveline:
Cat. 4 with slip-clutch Driveline is sized right for the intended cutting capacity. Slip-clutch will slip under load
instead of twisting the driveline. (Optional Cat. 5 driveline is available.)
Slip-clutch drivelines Slip-clutches are designed to slip to minimize twist damage to the driveline profiles.
High Blade tip speed
(See Specifications for actual FPM) Allows clean cutting of material.
6” Blade overlap Eliminates skipping during turns.
Left wing rotates clockwise Better discharge of material. Picks up tractor tracks.
2” to 14” Cutting Height Cover a wide range of cutting conditions.
3/16” Round stump jumper Standard thick stump jumper material keeps damage to a minimum.
1/4” Sidewall thickness Increased thickness reduces damage from objects being thrown into deck sidewalls.
Replaceable skid shoes Skid shoes protect deck in uneven terrain. Can be easily replaced if damaged or worn
out.
Self-leveling hitch Reduces drawbar wear by keeping hitch level while going through ditches.
Hinged wing sections Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches and
hollows can cause uneven cutting.
1” Solid hinge rods Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in
the hinge area itself.
Wing transport locks Wing transport locks securely hold the wings in the folded position in case of hydraulic
failure.
Enclosed front to rear dual leveling
rods Dual leveling rods enable the cutter to pull equally on the rear axle during travel over
rough terrain.
5-Bolt hubs 5-Bolt hubs makes the wheel assembly more durable and longer lasting.
4 or 6 Wheels Choice of laminated tires for eliminating flats, used aircraft tires for cushioning during
field and road use or bare rims for suppling your own automotive tires.
Spring cushioned center-axle Protects unit from bumps and ground shock.
Replaceable wheel spindles Wheel spindles can be replaced when damaged without replacing the entire axle
assembly.
318-301F continue on next page
6/28/11
