Land Pride RTA10 Series User manual

Rotary Tillers, Standard Tine Rotation
Features and Benefits
Designs, specifications, features and information are subject to change without notice.
66
RTA10 Series
Features Benefits
Working widths 42”, 50”, 58” to meet a wide range of abdications and needs.
Gearbox Warranty 5 Years on housing, gears, seals, and bearings. shows our confidence in the product.
Tractor HP range 17-25 HP
Fits Land Pride
Quick-Hitch Allows for quick and easy one person hook-up. Does not offset with Quick-Hitch.
Formed and reinforced rear
deflector Keeps dirt in and leaves a level finish. Forming gives deflector additional strength. Adjustable deflector allows for various finish results.
Clevis hitch Provides additional strength and easy one person hook-up.
Adjustable lower hitches Offset unit to cover right tire track.
Skid shoes Control depth with seven adjustments.
6 1/2” Digging depth For deep soil penetration.
Adjustable Parking stand Easy hook-up and storage.
Plate steel hitch Plate steel is stronger than flat bar type hitch
4 ‘C’ shaped tines per flange ‘C’ Shaped tines require less HP to move through the ground.
Solid rotor shaft 1 3/4” Solid steel rotor shaft for strength.
15” Rotor swing diameter For deep tilling and turning the soil over faster.
#80 Drive chain enclosed in oil bath Heavy drive chain stretches less, and oil bath keeps wear to a minimum.
Stamped chain cover Stamped forming gives the chain cover strength.
Fully shielded shear pin or slip-
clutch driveline Protects the gearbox and rotor shaft upon hitting obstructions. Slip-clutch saves having to replace shear-pins.
American made Many tillers are imported. American made means better parts availability.
Double lip seal on rotor bearing Double lip seal helps keep the dirt out and the grease in.
42” width 16”-26” std. 13”-29” Maximum Right 23”-19” Maximum Left
Offset Dimensions 50” width 25”-25” std. 18”-32” Maximum Right 32”-18” Maximum Left
58” width 29”-29” std. 22”-36” Maximum Right 36”-22” Maximum Left
Rotary Tillers,
Standard Tine Rotation
311-252F continued on next page
4/08/08

Rotary Tillers, Standard Tine Rotation
Features and Benefits
Designs, specifications, features and information are subject to change without notice.
67
RTA15 Series
Features Benefits
Working widths 50”, 58” to meet specific customer needs.
Tractor HP range 17 - 35 HP
Gearbox warranty 5 Year on housing, gears, seals and bearings. Shows our confidence in the product.
Fits Land Pride Quick-Hitch Allows for quick and easy one person hook-up. Cannot be used with sideshift.
Sideshift capabilities Sideshift tiller to cover right tire track. Gearbox slides with tiller.
Sideshift dimensions 50” 25-25 Std.; 12-38 Max. right; 31-19 Max. left
Sideshift dimensions 58” 29-29 Std.; 12-46 Max. right; 35-12 Max. left
Formed and reinforced
rear deflector Forming gives deflector additional strength. Adjustable deflector allows for various finish results.
Clevis hitch Provides additional strength and easy one person hook-up.
Skid Shoes Control depth with various settings.
6 1/2” Digging depth For deep soil penetration.
Adjustable Parking Stand Easy hook-up and storage.
Plate steel hitch Plate steel is stronger than flat bar type hitch.
4 ‘C’ Shaped heat-treated
tines per flange ‘C’ Shaped tines require less HP to move through the ground.
Solid rotor shaft 1 3/4” Solid steel shaft for strength.
Cat. 3 Driveline Cat. 3 Driveline with heavy-duty shear-bolt or slip-clutch
15” Rotor swing diameter For deep tilling and turning the soil over faster.
Double lip seal on rotor bearing Double lip seal helps keep the dirt out and the grease in.
#80 Drive chain
enclosed in oil bath Heavy drive chain stretches less, and oil bath keeps wear to a minimum.
Stamped chain cover Stamped forming gives the chain cover strength.
Fully shielded shear pin
or slip-clutch driveline Protects the gearbox and rotor shaft upon hitting obstructions. Slip-clutch saves having to replace shear-pins.
311-252F end
4/08/08