L&S WIRED MODULE 2.0 C User manual

MANUAL
WIRED MODULE 2.0 C
L&S 2.111.0541.00.03.00
IP20
- Wired module 2.0C can match with Touch,
IR and PIR Sensor.
-12VDC and 24VDC independent two versions.
- 12V MAX: 60W
- 24V MAX:120W
- One module has 4 output for LED lamp.
- Sensors are sold separately.
TOUCH
φ20
＜1s
≥1s
short press
Long press dimming 20% 100%
ON/OFF
PIR 180S 16S
OFF 10%
IR
PIR 180S 16S
OFF 10%
IR
PIR 180S 16S
OFF 10%
IR
PIR 180S 16S
OFF 10%
IR
IR
Wooden door application Glass door application
φ20
PIR 180S 16S
OFF 10%
IR
PIR 180S 16S
OFF 10%
IR
32
12
27
15
φ17
R6
Fixing hole
Set the IR button with off state,
the light will off when the door is closed.
Set the IR button with 10% state
the light will keep 10% brightness
when the door is closed.
INPUT OUTPUT
78mm 16.5mm
75mm

L&S 2.111.0541.00.03.00
PIR 180S 16S
OFF 10%
IR
PIR 180S 16S
OFF 10%
IR
PIR 180S 16S
OFF 10%
IR
PIR 180S 16S
OFF 10%
IR
PIR 180S 16S
OFF 10%
IR
PIR 180S 16S
OFF 10%
IR
IR (surface mounted)
󾙓
󾙔
The length of extension cable is 3000mm
One Sensor can only use one extension cable.
WIRED MODULE 2.0 C can be daisy chain when the load
is ≤ the maximun load of the LED driver. It is parallel
connection between each WIRED MODULE 2.0C, each
WIRED MODULE 2.0C can independent control its 4ways output.
PIR 180S 16S
OFF 10%
IR
Ø8
2mm
If you move in the direction of
the arrow, the sensing distance
is about 1.8 meters.
≈1.8M
PIR
<2.5M
When you move in the direction
of the arrow, the sensing
distance is < 0.5 meters.
<0.5M
PIR
Good sense: horizontal direction
Poor sense: vertical direction
Ø20mm
20-120mm
≈1m-2.5m
≥0.5m
PIR 180S 16S
OFF 10%
IR
PIR 180S 16S
OFF 10%
IR
The indicators will blink twice when you press the PIR and
IR buttons at the same time more than 3 seconds, after that
the brightness will be adjusted to 100%.
PIR
Time setting: 16S
Brightness Reset function
Extension cord About the shared power supply
Time setting: 180S
PIR 180S 16S
OFF 10%
IR
PIR 180S 16S
OFF 10%
IR
PIR 180S 16S
OFF 10%
IR
PIR 180S 16S
OFF 10%
IR
Set the IR button with off state,
the light will off when the door is closed.
Set the IR button with 10% state
the light will keep 10% brightness when
the door is closed.
180S 16S
PIR 180S 16S PIR
Set the PIR button with 16S statethe light will off
after 16 seconds after there is no detect object
Set the PIR button with 180S statethe light will off
after 180 seconds after there is no detect object
Wooden door application Glass door application
!!