Lanner HTCA-6310S User manual

HTCA-6310S User Manual
1
HTCA-6310S
User Manual
Version: 1.0
Date of Release:2020-02-14
Telecom Datacenter Appliances
Innovative Platforms for Next Generation Network Infrastructure

2
About this Document
This manual describes the overview of the various functionalities of this product and the information you
need to get it ready for operation. It is intended for those who are:
-responsible for installing, administering and troubleshooting this system or information technology
professionals.
-assumed to be qualified in the servicing of computer equipment, such as professional system
integrators, or service personnel and technicians.
The latest version of this document can be found on Lanner’s official website, available either through the
product page or through the Lanner Download Center page with a login account and password.
Conventions & Icons
This document utilizes different font types and icons in order to make selected text more transparent and
explicable to users. This document contains the following conventions:
Font Conventions
Example Convention Usage
iptables –F Monospace, shaded A command to be entered at a shell
command-line
Setup page Bold A title of a dialog box or a page
<Enter> Between a pair of inequality signs A physical keyboard button
“Menu”Between a pair of quotation marks A menu option or a software button to be
clicked
Readme.txt In Italic A filename or a file path
IPMI User Guide Underlined The name of another document or a chapter
in this document
Icon Descriptions
Icon Usage
This mark indicates that there is something you should pay special
attention to while using the product.
This mark indicates that there is a caution
or warning and it is
something that could damage your property or product.
Note or Information
Warning or Important

HTCA-6310S User Manual
3
Online Resources
To obtain additional documentation resources and software updates for your system, please visit the
Lanner Download Center. As certain categories of documents are only available to users who are logged in,
please be registered for a Lanner Account at http://www.lannerinc.com/ to access published documents
and downloadable resources.
For troubleshooting the issues with your system, please visit the Lanner Q&A page for diagnostic
procedures and troubleshooting steps.
Technical Support
In addition to contacting your distributor or sales representative, you could submit a request to our Lanner
Technical Support at http://www.lannerinc.com/technical-support where you can fill in a support ticket to
our technical support department.
Copyright and Trademarks
This document is copyrighted © 2020 by Lanner Electronics Inc. All rights are reserved. The original
manufacturer reserves the right to make improvements to the products described in this manual at any
time without notice.
No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means
without the prior written permission of the original manufacturer.
Information provided in this manual is intended to be accurate and reliable. However, the original
manufacturer assumes no responsibility for its use, nor for any infringements upon the rights of third
parties that may result from such use.
Documentation Feedback
Your feedback is valuable to us, as it will help us continue to provide you with more accurate and relevant
documentation. To provide any feedback, comments or to report an error, please email to
[e-mail]. Thank you for your time.

4
Contact Information
Aknowledgments
Intel, Intel logo, Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries
in the United States and other countries.
Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Taiwan Corporate Headquarters
Lanner Electronics Inc.
7F, No.173, Sec.2, Datong Rd. Xizhi District,
New Taipei City 22184, Taiwan
立端科技股份有限公司
221 新北市汐止區
大同路二段 173 號7樓
T: [phone]
F: [phone]
E: [e-mail]
China
Beijing L&S Lancom Platform Tech. Co., Ltd.
Guodong LOFT 9 Layer
No. 9 Huinan Road,
Huilongguan Town, Changping District, Beijing
102208 China
T: [phone]
F: [phone]
E: [e-mail]
USA
Lanner Electronics Inc.
47790 Westinghouse Drive Fremont, CA 94539
T: [phone]
F: [phone]
E: [e-mail]
Canada
LEI Technology Canada Ltd
3160A Orlando Drive Mississauga, ON L4V 1R5
Canada
T: [phone]
F: [phone]
E: [e-mail]

HTCA-6310S User Manual
5
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Note
1. An unshielded-type power cord is required in order to meet FCC emission limits and also to prevent interference
to the nearby radio and television reception. It is essential that only the supplied power cord be used.
2. Use only shielded cables to connect I/O devices to this equipment.
3. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Important
1. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
2. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules.

6
Safety Guidelines
Follow these guidelines to ensure general safety:
Keep the chassis area clear and dust-free during and after installation.
Do not wear loose clothing or jewelry that could get caught in the chassis. Fasten your tie or scarf and
roll up your sleeves.
Wear safety glasses if you are working under any conditions that might be hazardous to your eyes.
Do not perform any action that creates a potential hazard to people or makes the equipment unsafe.
Disconnect all power by turning off the power and unplugging the power cord before installing or
removing a chassis or working near power supplies
Do not work alone if potentially hazardous conditions exist.
Never assume that power is disconnected from a circuit; always check the circuit.
Consignes de sécurité
Suivez ces consignes pour assurer la sécurité générale :
Laissez la zone du châssis propre et sans poussière pendant et après l’installation.
Ne portez pas de vêtements amples ou de bijoux qui pourraient être pris dans le châssis. Attachez votre
cravate ou écharpe et remontez vos manches.
Portez des lunettes de sécurité pour protéger vos yeux.
N’effectuez aucune action qui pourrait créer un danger pour d’autres ou rendre l’équipement
dangereux.
Coupez complètement l’alimentation en éteignant l’alimentation et en débranchant le cordon
d’alimentation avant d’installer ou de retirer un châssis ou de travailler à proximité de sources
d’alimentation.
Ne travaillez pas seul si des conditions dangereuses sont présentes.
Ne considérez jamais que l’alimentation est coupée d’un circuit, vérifiez toujours le circuit. Cet appareil
génère, utilise et émet une énergie radiofréquence et, s’il n’est pas installé et utilisé conformément aux
instructions des fournisseurs de composants sans fil, il risque de provoquer des interférences dans les
communications radio.
Lithium Battery Caution
There is risk of explosion if the battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Installation should be conducted only by a trained electrician or only by an electrically trained person
who knows all installation procedures and device specifications which are to be applied.
Do not carry the handle of power supplies when moving to another place.
Please conform to your local laws and regulations regarding safe disposal of lithium battery.
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery can result in
an explosion.

HTCA-6310S User Manual
7
Leaving a battery in an extremely high temperature environment can result in an explosion or the
leakage of flammable liquid or gas.
A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable
liquid or gas.
Avertissement concernant la pile au lithium
Risque d’explosion si la pile est remplacée par une autre d’un mauvais type.
Jetez les piles usagées conformément aux instructions.
L’installation doit être effectuée par un électricien formé ou une personne formée à l’électricité
connaissant toutes les spécifications d’installation et d’appareil du produit.
Ne transportez pas l’unité en la tenant par le câble d’alimentation lorsque vous déplacez l’appareil.
Operating Safety
Electrical equipment generates heat. Ambient air temperature may not be adequate to cool equipment
to acceptable operating temperatures without adequate circulation. Be sure that the room in which you
choose to operate your system has adequate air circulation.
Ensure that the chassis cover is secure. The chassis design allows cooling air to circulate effectively. An
open chassis permits air leaks, which may interrupt and redirect the flow of cooling air from internal
components.
Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. ESD damage occurs
when electronic components are improperly handled and can result in complete or intermittent failures.
Be sure to follow ESD-prevention procedures when removing and replacing components to avoid these
problems.
Wear an ESD-preventive wrist strap, ensuring that it makes good skin contact. If no wrist strap is
available, ground yourself by touching the metal part of the chassis.
Periodically check the resistance value of the antistatic strap, which should be between 1 and 10
megohms (Mohms).
Sécurité de fonctionnement
L’équipement électrique génère de la chaleur. La température ambiante peut ne pas être adéquate pour
refroidir l’équipement à une température de fonctionnement acceptable sans circulation adaptée.
Vérifiez que votre site propose une circulation d’air adéquate.
Vérifiez que le couvercle du châssis est bien fixé. La conception du châssis permet à l’air de
refroidissement de bien circuler. Un châssis ouvert laisse l’air s’échapper, ce qui peut interrompre et
rediriger le flux d’air frais destiné aux composants internes.
Les décharges électrostatiques (ESD) peuvent endommager l’équipement et gêner les circuits
électriques. Des dégâts d’ESD surviennent lorsque des composants électroniques sont mal manipulés et
peuvent causer des pannes totales ou intermittentes. Suivez les procédures de prévention d’ESD lors du

8
retrait et du remplacement de composants.
Portez un bracelet anti-ESD et veillez à ce qu’il soit bien au contact de la peau. Si aucun bracelet n’est
disponible, reliez votre corps à la terre en touchant la partie métallique du châssis.
Vérifiez régulièrement la valeur de résistance du bracelet antistatique, qui doit être comprise entre 1 et
10 mégohms (Mohms).
Mounting Installation Precautions
The following should be put into consideration for rack-mount or similar mounting installations:
Do not install and/or operate this unit in any place that flammable objects are stored or used in.
The installation of this product must be performed by trained specialists; otherwise, a non-specialist
might create the risk of the system’s falling to the ground or other damages.
Lanner Electronics Inc. shall not be held liable for any losses resulting from insufficient strength for
supporting the system or use of inappropriate installation components.
Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient
temperature of the rack environment may be greater than room ambient. Therefore, consideration
should be given to installing the equipment in an environment compatible with the maximum ambient
temperature (Tma) specified by the manufacturer.
Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of airflow
required for safe operation of the equipment is not compromised.
Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition
is not achieved due to uneven mechanical loading.
Circuit Overloading - Consideration should be given to the connection of the equipment to the supply
circuit and the effect that overloading of the circuits might have on overcurrent protection and supply
wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this
concern.
Reliable Grounding - Reliable grounding of rack mounted equipment should be maintained. Particular
attention should be given to supply connections other than direct connections to the branch circuit (e.g.
use of power strips).

HTCA-6310S User Manual
9
Electrical Safety Instructions
Before turning on the device, ground the grounding cable of the equipment. Proper grounding
(grounding) is very important to protect the equipment against the harmful effects of external noise and to
reduce the risk of electrocution in the event of a lightning strike. To uninstall the equipment, disconnect
the ground wire after turning off the power. A ground wire is required and the part connecting the
conductor must be greater than 4 mm2 or 12 AWG.
Consignes de sécurité électrique
Avant d’allumer l’appareil, reliez le câble de mise à la terre de l’équipement à la terre.
Une bonne mise à la terre (connexion à la terre) est très importante pour protéger l’équipement contre
les effets néfastes du bruit externe et réduire les risques d’électrocution en cas de foudre.
Pour désinstaller l’équipement, débranchez le câble de mise à la terre après avoir éteint l’appareil.
Un câble de mise à la terre est requis et la zone reliant les sections du conducteur doit faire plus de 4
mm2 ou 12 AWG.
Grounding Procedure for DC Power Source
Loosen the screw of the earthing point.
Connect the grounding cable to the ground.
The protection device for the DC power source must provide 30
A current.
This protection device must be connected to the power source
before DC power.
Procédure de mise à la terre pour source
d’alimentation CC
Desserrez la vis du terminal de mise à la terre.
Branchez le câble de mise à la terre à la terre.
L’appareil de protection pour la source d’alimentation CC
doit fournir 30 A de courant.
Cet appareil de protection doit être branché à la source
d’alimentation avant l’alimentation CC.

10
This equipment must be grounded. The power cord for product should be connected to a socket-outlet
with earthing connection.
Cet équipement doit être mis à la terre. La fiche d'alimentation doit être connectée à une prise de terre
correctement câblée
Suitable for installation in Information Technology Rooms in accordance with Article 645 of the National
Electrical Code and NFPA 75.
Peut être installé dans des salles de matériel de traitement de l'information conformément à l'article 645
du National Electrical Code et à la NFPA 75.
The machine can only be used in a restricted access location and has installation instructions by a skilled
person.
Les matériels sont destinés à être installés dans des EMPLACEMENTS À ACCÈS RESTREINT.
Instruction for the installation of the conductor to building earth by a skilled person.

HTCA-6310S User Manual
11
Table of Contents
Chapter 1: Product Overview .......................................................... 12
Main Features............................................................................................................................. 12
Ordering Information ................................................................................................................. 12
Package Content......................................................................................................................... 13
System Specifications ................................................................................................................. 14
Front Panel ................................................................................................................................. 15
Rear Panel................................................................................................................................... 16
Motherboard Information.......................................................................................................... 17
Chapter 2: Hardware Setup............................................................. 26
Installing the CPU ....................................................................................................................... 26
Installing the System Memory.................................................................................................... 27
Chapter 3: Software Setup .............................................................. 29
Remote Server Management ..................................................................................................... 29
Installing Operating System........................................................................................................ 38
Appendix: Terms and Conditions ................................................... 39
Warranty Policy .......................................................................................................................... 39
RMA Service................................................................................................................................ 39
RMA Service Request Form ........................................................................................................ 40

Chapter 1: Product Overview
12
CHAPTER 1: PRODUCT OVERVIEW
HTCA-6310S can support up to 256GB of DDR4 2,400 MHz REG DIMM memory modules and comes with
sixteen SATA 3.5” hot-swappable disk drive bays. In addition, HTCA-6310S provides other I/O functionality
including one onboard CF slot, one NIC module slot compliant with 1/10/40/Fiber/Copper LAN connectivity,
one RJ-45 console, one IPMI port for remote management, and one double-width PCIe*16 socket for
graphic acceleration card and a PCIe *8 socket for RAID Card support of 16xBays SATA HDD. HTCA-6310S is
built with redundant design supporting 1 + 1 redundant power supply and removable fan module.
HTCA-6310S is optimal for telecommunication and data center applications such as IP surveillance, ISP &
cloud hosting, and TV/Media industry where performance and storage are critical.
Main Features
3U High Performance Storage Server Appliance
Support Intel® Xeon® E5-2600 v3/v4 Series CPUs and max. up to 8 x DDR4 R-DIMM
16 x hot swappable 3.5” storage bays by Avago MegaRAID SAS 9361-16i RAID Card.
Support Lanner NIC module on the rear
One Console RJ45, LOM port, MGT port, 2x USB, VGA port
Internal 1x PCIe by 16 slot for graphic acceleration card
1+1 redundant power and removable fan module
Ordering Information
SKU No. Main Features
HTCA-6310SA
HybridTCA™ high-performance chassis 3U storage server appliance with Intel® Xeon®
E5-2600 series v3/v4 processors + 16 bays 3.5” HDDs (by Avago MegaRAID SAS
9361-16i RAID Card)with 1x NIC module slot
HTCA-6310SB
HybridTCA™ high-performance chassis 3U storage server appliance with Intel® Xeon®
E5-2600 series v3/v4 processors + 16 bays 3.5” HDDs (by Avago MegaRAID SAS
9361-16i RAID Card)+ Riser for 1x PCIe by 16 with 1x NIC module slot

HTCA-6310S User Manual
13
Package Content
Your package contains the following items:
1x HTCA-6310S System
2x Power Cable (Based on region and power type)
1x Ear Rack mount kit with screws
1x Console cable (RJ45 to D-SUB9)
2x LAN Cable
Note
If you should find any components missing or damaged, please contact your dealer immediately for assistance.

Chapter 1: Product Overview
14
System Specifications
Compute Node
CPU Options
Intel® Xeon® processor E5-2600 v3/v4 Series
BIOS
AMI SPI Flash BIOS
Chipset
Intel C612 Chipset
Memory
Technology
DDR4 2400MHz (Registered)
Max. Capacity
256GB (Registered)
Socket
Up to 8 x 288-pin DIMM
Ethernet Port
Controller
2 x i210
Interface
1 x MGMT port, 1 x LAN port
Storage
Type
SATA III, 6Gb/s per port
Installation
1 X PCIe X8 Slot reserved for RAID Card to support 16x 3.5
”
Swappable Drive Bays
Type
CF
Installation
1 x CF socket
Rear IO
Reset Button
Yes
Console 1 x RJ45 (without LED)
Display VGA
USB 2x type A
IPMI
OPMA socket to support IPMI (IAC-AST2300)
Expansion
PCIe
2x by 8 (1 for RAID card, others for Lanner NIC module)
Cooling
Processor
CPU heatsinks with fan duct
System
3 x hot-swappable cooling fan sets with smart fan control
Environment
Operating/Storage
Temperature
0 ~ 40ºC /-20 ~ 70ºC
Relative Humidity
5%~90%, non-condensing
System Dimensions
LCD Module
N/A
Watchdog
Yes
Internal RTC with Li
Battery
Yes
Mechanical
Dimension (W x H x D)
442 x 132 x 736.6 mm
Weight
30 kg
Mounting
Rack mount
Power
Type / Watts
AC 1200 watt 1+1 Redundant /each
DC 1010 watt 1+1 Redundant /each
PM bus support, up to 2 PSU slots
Input
AC 100~240V
DC -36~-72V
OS Support
Linux
Linux Kernel 2.6 or above
Certification
EMC
CE Class A, FCC Class A

HTCA-6310S User Manual
15
Front Panel
No. Description
F1 Power Button Push to power on/off the system
F2 Reset Button Software reset
F3 LED Indicators
F4 MGMT Port RJ-45 Management Port
F5 Console Port RJ45 Console Port
F6 USB Port 1x USB 2.0 Port
F7 HDD Tray 16x 3.5” Swappable HDD Tray
F4
F6
F5
F1
F3
F2
F7
System
Power
System
Status

Chapter 1: Product Overview
16
Rear Panel
No. Description
R1 LAN Port 1x RJ45 LAN Port
R2 USB Port 1x USB 2.0 Port
R3 VGA Port 1x DB15 VGA Port
R4 NIC Module Slot For 1x PCIe by 8 Lanner NIC module
R5 Cooling Fan 3x cooling fans per CPU blade
R6 Redundant Power
Supply
AC:1200 Watt N+1 Redundant /each, 85~264 V
DC:1010 Watt N+1 Redundant /each, -36 ~ -72 V
R4
R6
R1
R3
R2
R5

HTCA-6310S User Manual
17
Motherboard Information
Block Diagram
The block diagram indicates how data flows among components on the motherboard. Please refer to the
following figure for your motherboard’s layout design.

Chapter 1: Product Overview
18
The motherboard layout shows the connectors and jumpers on the board. Refer to the following picture as
a reference of the pin assignments and the internal connectors.
JSPIROM1
USB1
JSATA2
JOPMA1
SW3
CONN1
CONN2
J27
JFAN1-5
ATX4
ATX1
CONN3
DDR4 Socket
J80PORT1
ATX2&3
MGT1
CF1
JRISER1
OPEN2
SW1
JCMOS1

HTCA-6310S User Manual
19
Internal Jumpers
The pin headers on the motherboard are often associated with important functions. With the shunt (Jumper)
pushed down on the designated pins (the pin numbers are printed on the circuit board, surrounding the
pin header), certain feature can be enabled or disabled. While changing the jumpers, make sure your
system is turned off.
To short the designated pins, push the jumper down on them so that they become SHORT. To make the
pins setting OPEN, simply remove the jumper cap.
2-pin Header 3-pin Header 4-pin Header
Open Short Open (1-2) Jumped Open (1-2) Jumped
J27: Software reset
Select SW3 reset option
OPEN2: Management Port select Pin header
JCMOS1:Clear CMOS Jumper
You may set jumper pins to clear CMOS
Pin Description
1-2 Hardware Reset
2-3 Software Reset
Pin Description
Close IPMI card
Open On board I210
Pin Description
1-2 Normal (Default)
2-3 Clear CMOS
1 2 1 2 3
4
1 3
2
1 2

Chapter 1: Product Overview
20
Internal Connectors
MGT1: 2x6 pin header for RJ-45 LAN management port (rear side).
ATX1~ATX4: 8-pin ATX power connectors.
JSATA2: 7-pin SATA signal connector for SATA storage device.
Pin Description Pin Description
1 MGT2_MDIP_0 2 MGT2_MDIN_0
3 MGT2_MDIP_1 4 MGT2_MDIN_1
5 MGT2_MDIP_2 6 MGT2_MDIN_2
7 MGT2_MDIP_3 8 MGT2_MDIN_3
9 MGT_LAN2_100# 10 MGT_LAN2_ACT#
11 MGT_LAN2_1G# 12 P3V3_AUX
Pin Description
1 GND
2 +12V
3 GND
4 +12V
5 GND
6 +12V
7 GND
8 +12V
Pin Description
1 GND
2 TX_P
3 TX_N
4 GND
5 RX_N
6 RX_P
7 GND