
Quick start
1. Power on: press the power on/off button, corresponding LED indicates the current
electricity consumption for 3 seconds.
2.Pairing: After power on, you can scan and search “BSK11B”
5. BSK11B can play music from your device.
Connection indication
3.5mm audio cable connection
Plug one end of the 3.5mm audio cable into speaker audio interface , the other end into
the device you want to connect.
Bluetooth wireless connection
1. Power on and Bluetooth is ready.
3.Search and pairing the equipment.
4. Please enter "0000 " if need to enter the PIN code.
5. Select and connect the “BSK11B”
6 Can start playing music after connected successful.
Remarks
1.Pairing mode will last 5 minutes.other mobile phone cannot search out the bluetooth
speaker.
2.Re-connecting automatically(includes two cases)
a. If the bluetooth speaker turned off, it will connected to the pre-set bluetooth speaker
automatically When turn on manually.
b.When the BSK11B disconnects to mobile phone owing to exceeding effective
range(normally Link loss if exceed 10M), the bluetooth speaker will re-connect to mobile
phone if back to effective range within about 10 minutes.
3.When no connection, bluetooth speaker will automatically shut down after 10 minutes ,
you will hear a tone , white lights flashes.
4. Low Battery Alarm : The white light will flashes 3 times when low voltage, there will has
an indication tone every 60 seconds , please charge the speaker.