Larson Electronics EXP-LED-HL-HC-LPDF User manual

Intrinsically Safe LED Headlamp - Five Modes, C1D1 Headlight - Spot/Flood Beam - Clip Mount
EXP-LED-HL-HC-LPDF
EXP-LED-HL-HC-LPDF Low Profile LED Headlamp Ratings/Approvals
Listing: United States - Canada Class I, Division 1 Groups A,B,C,D
Lamp Type: CREE LED Class II, III Groups E,F,G
Dimensions: 3.54"-L 1.58"-W 1.875"-D Class I Zone 0 IIC T4
Weight: 5.8 oz Class I Zone 20 IIIC T135ºC
Power: (3) AAA Alkaline Batteries Ex II 1 G Ex ia IIC T4 Ga
High Spotlight Lumens: 180 Ex ia IIC T4 Ga
Low Spotlight Lumens: 100 DEMKO 17 ATEX 1824
High Floodlight Lumens: 180 IECEx UL 17.0003
Low Floodlight Lumens: 100 Strapless Mounting
Dual-Light Lumens: 200
Candela: 2,800
Lamp Life: 50,000+ Hours
High Spotlight Runtime: 3.5 Hours
Low Spotlight Runtime: 10 Hours
High Floodlight Runtime: 3.5 Hours
Low Floodlight Runtime: 10 Hours
Dual-Light Runtime: 3 Hours
Waterproof: Yes- Rated to 1 Meter
Waterproof Rating: IP67 Special Orders- Requirements
Drop Rating: 2 Meters Contact us for special requirements
Switch Functions: Dual Switches - High/Low Spotlight, High/Low Floodlight, High/Low
Spotlight and Floodlight Combo Toll Free: 1-800-369-6671
Case Material: Glass-filled Nylon Polymer Intl: 1-903-270-1187
Mounting: Clip Mount Toll Free: 1-800-369-6671
Available Colors: Green E-mail: [email protected]
Made in the USA
The Larson Electronics EXP-LED-HL-HC-LPDF Intrinsically Safe LED Headlight
is ideal for a wide variety of uses including Industrial Safety, Public Works &
Utilities, Law Enforcement, Hardware/Tool, Automotive, Marine, Sporting
Goods and Consumer applications. Two high intensity CREE LED emitters
mounted within a lightweight housing provides up to 10 hours of useable light
and can be attached to a hard hat with the included stainless steel clip (no
tools needed).
***Note: Hard hat shown not included.***
The EXP-LED-HL-HC-LPDF instrinsically safe LED headlight produces an intense light
beam while providing up to 10 hours of illumination. Two high intensity CREE LEDs
mounted within an impact resistant housing is powered by 3 AAA batteries to produce a
long lived light beam of up to 180 lumens in output. Included with this explosion proof
1
Larson Electronics LLC
9419 E US HWY 175, Kemp, TX 75143
Phone: [phone]
www.LarsonElectronics.com
Email: [email protected]
Fax: [phone]

headlight is a stainless steel clip attachment for ease of operation when mounting on
hard hats.
Featuring a housing constructed of glass-filled nylon polymer that has been drop test
verified from 2 meters and an IP67 waterproof rating tested at 1 meter, this headlight
provides users with a highly convenient and safe light source that leaves their hands
free for work operations. This headlight features two high output CREE LED emitters for
up to five modes of illumination.
Two rubber dome push button switches allows easy operation between modes even
when wearing gloves. The right push button operates the spotlight, whereas the left
switches between high/low spotlight, high/low floodlight and high/low for spot and flood
combined. The full power spotlight produces 180 lumens and a beam reaching over 347
feet in distance with a 3.5-hour runtime. The half power spotlight produces 100 lumens
with a 10-hour runtime. The full power floodlight produces 180 lumens with a 3.5-hour
runtime. The half power floodlight produces 100 lumens with a 10-hour runtime. The
spot and flood combined produces 200 lumens with a 3-hour runtime.
Click Photos to Enlarge
LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs
have no filaments or fragile housings to break during operation and/or transportation.
Instead of heating a small filament or using a combination of gases to produce light,
light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric
current is applied, providing instant illumination with no warm up or cool down time
before re-striking. Because there is no warm up period, this light can be cycled on and
off with no reduction in lamp life.
LED lights run at significantly cooler temperatures than traditional metal halide and
high pressure sodium lights and contain no harmful gases, vapors, or mercury, making
them both safer and more energy efficient. No extra energy is wasted in cooling
enclosed work areas due to external heat emissions from bulb type lights, and the
operator risks associated with traditional lighting methods, such as accidental burns
and exposure to hazardous substances contained in the glass bulbs, are eliminated. In
addition, LEDs are also safer for the environment as they are 100% recyclable, which
eliminates the need for costly special disposal services required with traditional gas
burning and arc type lamps.
Mounting: The EXP-LED-HL-HC-LPDF mounts onto hard hats and other preferred
surfaces using a stainless steel clip attachment. This versatile mounting component
supports the LED headlamp without tools or loose-fitting straps.
Applications: Inspections, hazardous locations, flammable work sites, oil and gas,
chemical processing, repair, maintenance, confined spaces, detailed tasks, portable
lighting, monitoring and more.
At Larson Electronics, we do more than meet your lighting needs. We also provide
replacement, retrofit, and upgrade parts as well as industrial grade power accessories.
Our craftsmen can custom build any lighting system and/or accessories to fit the
unique demands of your operation. A commitment to honesty, quality, and
dependability has made Larson Electronics a leader in the lighting and electronics
business since 1973. Contact us today at 800-369-6671 or message
[email protected] for more information about our custom options tailored to
meet your specific industry needs.
2
Larson Electronics LLC
9419 E US HWY 175, Kemp, TX 75143
Phone: [phone]
www.LarsonElectronics.com
Email: [email protected]
Fax: [phone]

3
Larson Electronics LLC
9419 E US HWY 175, Kemp, TX 75143
Phone: [phone]
www.LarsonElectronics.com
Email: [email protected]
Fax: [phone]

4
Larson Electronics LLC
9419 E US HWY 175, Kemp, TX 75143
Phone: [phone]
www.LarsonElectronics.com
Email: [email protected]
Fax: [phone]

5
Larson Electronics LLC
9419 E US HWY 175, Kemp, TX 75143
Phone: [phone]
www.LarsonElectronics.com
Email: [email protected]
Fax: [phone]

6
Larson Electronics LLC
9419 E US HWY 175, Kemp, TX 75143
Phone: [phone]
www.LarsonElectronics.com
Email: [email protected]
Fax: [phone]

Links (Click on the below items to view):
- Addpic1large
- Addpic2large
- Addpic3large
- Addpic4large
- large
- Manual
- medium
- SpecSheetSpanish
- HigResPic1
- HigResPic2
- HigResPic3
- HigResPic4
- HigResPic5
- HigResPic6
- HigResPic7
- HigResPic8
- HigResPic9
7
Larson Electronics LLC
9419 E US HWY 175, Kemp, TX 75143
Phone: [phone]
www.LarsonElectronics.com
Email: [email protected]
Fax: [phone]