Laser corporation pty Nav-actma20 User manual

Device Overview

How to wear your Q-Band HR+?

User Manual

Wear Q-Band HR+ on your wrist

1 2

4 5

Charge your Q-Band HR+

Fasten Q-Band HR+ with clasp 3Detecting your Heart Rate

Change the wristband

Put on the wristband with the screen facing up

and the band wrapped around your wrist. Slide

one band through the loop of the other band, and

align the clasp along the band to find the holes

where best fit the clasps.

Video Demo:

http://ww2.voiis.com/igotu-life/wear/Q-Band-HR-Plus

Please make sure the wristband is worn as tightly as

possible on the wrist without any discomfort, in order

to enhance the accuracy of heart rate signals that

are detected.

Wear the wristband three fingers away from your

wrist. When “-----“ text appears on the screen,

please stay still briefly for about 10 seconds to obtain

a heart rate reading.

Squeeze both clasps into the holes on the wristband

until you hear a click, indicating the band is securely

fastened.

Note: The wristbands are both replaceable and

reversible.

Remove the wristbands by sliding out both bands from the slots on both sides

of the core.

Insert the new bands into the slots on both sides of the core.

Important Notice:

Failure to follow the instructions above might cause damage to the device.

NAV-ACTMA20

Reversible Wristband Clasp

CoreTouch Button

Metallic contact for charging

Optical Sensor

Video Demo

Prior to charging Q-Band HR+, make sure it is securely placed inside the

charging box with the lid closed, and the USB connector is plugged in to a

computer or a power source via a power adapter.

Important Notice:

The product is shipped with the screen and keys locked, and will be unlocked once it is

charged via USB connection. Please make sure the "Charging" icon appears while it is

being charged, indicating the device is connected correctly and getting charged.

Video Demo:

http://ww2.voiis.com/igotu-life/charge/Q-Band-HR

4(1)Push

(2)Up

Charging icon

Get Started

Download i-gotU Life App

1 2

3 4

Start

5Screen Description

Set up

Features

User Manual

Download i-gotU Life app from Google Play or App Store on your

smartphone:

https://play.google.com/store/apps/details?id=com.mobileaction.ilife

http://appstore.com/igotulife

Apk download: http://global.mobileaction.com/download/apk

Your Q-Band HR+ can be configured directly on the i-gotU Life app.

First time setup:

Charge the device to unlock the key and screen.

Open the i-gotU Life app.

A Setup Wizard will be launched automatically.

Follow the on-screen instructions to proceed with more settings.

Set up a new device from Settings:

Open the i-gotU Life app.

Tap the app icon at the upper left corner to open function menu.

Choose Settings.

Tap Setup New Device under MORE DEVICE SETTINGS.

Follow the on-screen instructions to continue.

Note

Your personal information is used to calculate your Base Metabolic

Rate (BMR), which determines your calories burned.

1. Switch between different function modes

2. Change display information

3. Modes

1. Tap the button twice to wake up the device screen.

2. Long-press the button on the device until you see 4 icons

on the screen for mode selection.

3. Tap the button twice to switch mode.

4. You’ll be entering the selected mode in 3 seconds.

Information shown on the screen will vary as you press the

button on the Q-Band HR+ to toggle between screens.

Daily mode: Analyzes your daily data, including steps taken

and calories burned.

Sleep mode: Tracks your sleep pattern and quality.

Sports mode: Starts a workout and displays information

including duration, steps taken, calories burned, and distance

traveled during the workout.

Nap mode: Awakes you via vibration after a short nap.

Connecting

Disconnected

Alarm

Daily Mode

Date

Overall Progress

(the average of Calories + Steps)

Battery Status

Steps

Calories

Heart Rate

Aerobic (Zone 3 and above)

Duration

Distance

Silent Alarm

Notification

Silent alarm gives you a wake-up alert via soft vibrations. While in the

sleep mode, the alarm can be dismissed by long-pressing the button on

the device. By pressing the button once, the alarm will not be dismissed

but alert you again in 5 minutes. Alarm settings can be changed in: open

i-gotU Life app > Menu > Silent Alarm.

You will be notified with incoming calls, SMS, E-Mail, or alerts from the

social apps via vibration. Notification can be set up from: i-gotU Life App

Menu -> Notification.

Important Notice

1. Please make sure your device is fully charged when used for the first time. It takes about 2 hours

before it is fully charged.

2. Although the device is usable in the rain, its use under water is prohibited. Please avoid showering or

sauna/steam bathing because high temperature, steam and water jet may cause damage to the device.

3. Please do not use any corrosive chemical to clean the device.

4. The built-in Li-Polymer Battery might be damaged if it remains low voltage for a long time. It is

suggested that you charge the battery once every three months to prolong the battery's lifetime, even

though you don't use the device very often or do not plan to use it for a while.

1 3 5 2 4

NAV-ACTMA20

Warranty Against Defects

Laser Corporation Pty Ltd (“Laser”) warrants your new product to be free from defects in materials and workmanship for 12 months, from the date of purchase, provided that the product is used in accordance with accompanying recommendations

or instructions where provided. The benefit of this warranty is in addition to your rights under the Australian Consumer Law and to other rights and remedies of the consumer under a law in relation to the goods or services to which the warranty relates.

Through a network of retailers and resellers, Laser will provide you with your choice of a repair, exchange (where possible) or refund (within Dead on Arrival period) for this product if it becomes defective within the warranty period. This warranty will no

longer apply where the defect is a result of alteration, accident, misuse, abuse, normal wear and tear, neglect or improper storage. Please retain your receipt as proof of purchase. How to make a product warranty claim:

Step 1: Find your receipt which proves the date of purchase. Where the date of purchase cannot be verified, your place of purchase or Laser will make an assessment based on the date of manufacture, the condition of the Laser product

and the type of defect.

Step 2a): Contact your place of purchase. They will assess the nature of the fault and repair, replace or refund the product as per their store refund or warranty policy.

Step 2b): If your place of purchase cannot be contacted, then you can contact Laser Customer Service with details of your defective Laser Product Phone (02) 9870 3388; or Email: [email protected] or

online www.laserco.com.au/warranty (click on “Consumers (End Users)”). Our business address is: Unit 1/6-8 Byfield Street, North Ryde, NSW 2113

Step 3: Laser will issue you with a Return Authorisation (RA) number within 48 hours. When requested, send us the defective product and a copy of your receipt. Laser will cover the cost of the return delivery.

Step 4: Wait for us to contact you. Once we have received your defective Laser product for inspection, we will inform you of our assessment of your claim within 7 days. When we contact you, we will firstly let you know whether you have a valid claim

under this Warranty, and if so, we will inform you whether your defective Laser product will be replaced or repaired, together with the number of days you can expect to wait to receive your replaced or repaired Laser product.

Step 5: For further details on warranty cover and returns, please check Terms and Conditions for Warranty Returns section at www.laserco.com.au/warranty (Consumers Section).

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also