Laser Corporation Pty DAB-DG108 User manual

DAB-DG108 USER MANUAL
1
Please read carefully before use

DAB-DG108 USER MANUAL
2
IMPORTANT SAFETY INSTRUCTIONS AND PRECAUTIONS
- Read all instructions carefully before use.
- Retain manuals for future reference.
- Use this product only in the manner described.
- Only use a water-dampened soft-cloth to clean the surface of this product.
- The following will damage this product: any liquid such as water or moisture, extreme
heat; cold; humidity, dusty or sandy environments.
- This product has re-moveable batteries, remove them before long periods of in-active use.
Removing the batteries prevents damage due to leakage. Always insert batteries
according to the + and - signs and replace both batteries with the same type at the
same time.
- Thereare no user serviceable parts in this product.
- Un-authorized attempts to dismantle or repair this product will void product warranty and
may result in dangerous electric shock.
- Remove any power or data cords by pulling them from the plug and not the cord.
- Do not use this product in electrical storms.
TABLE OF CONTENTS
Important Safety Instructions and Precautions.................................................................................. 2
DAB+ mode.......................................................................................................................................4
FMmode...........................................................................................................................................4
Setting uppreset stations..................................................................................................................4
Browse station information...............................................................................................................5
Factory reset.....................................................................................................................................5
Whats inthe box...............................................................................................................................5
Trouble Shooting / Q& A................................................................................................................... 6

DAB-DG108 USER MANUAL
3
PRODUCT CONNECTIONS AND USE
BUTTON
COMMAN
DS
(for DAB+ mode, FM mode or
both)
DAB+
FM
DAB+/FM Press to change mode between DAB+ and FM modes
P
ress and hold to perform a factory reset
(then
p
ress
“
en
ter
”
when prompted
)
Info Press to scroll through radio station information
P
ress and hold to display software version
n/a
Preset
Press to recall a preset station
Press and hold to set a preset station
(the up/down and enter as prompted)
Enter
Press to confirm select
ion
Press to
toggle
between
auto
and
mono
audio modes
Press and hold to go to manual tuning
H
old to set the signal sensitivity
(
for
reception issues)
Scan Press to perform a full scan
Press to forward scan
to the
next available station
Press
to backwards scan f
or next available station
Up Press to go to the next station Press to increase frequency by 0.05MHz increments
Down
Press to go to
the
previous station
Press to decrease frequency by
0.05MHz
incremen
ts
Vol +
Press toincrease the volumelevel
Vol
-
Press to
decrease the volume level
Power
Press to turn on/off standby

DAB-DG108 USER MANUAL
4
DAB+ MODE
Press the DAB/FM button to set the device to DAB+ or FM radio mode
IMPORTANT: Perform a full station auto-scan before using your DG108 for the first time
Auto Scan:
1) Press the Scan button to perform a full scan.
IMPORTANT: DigitalRadio’s do notpick up new channels automatically. Whenmoving from one
location to another, it is recommended that you perform another full scan. You may be unaware of
new stations in your new location.
Manual Scan:
1) Hold the Enter button until the text “ Manual Time” is displayed
2) Using the Up and Down buttons, mov through the frequency to find your station
3) Press the Enter button twice to confirm the frequency and to exit
FM MODE
Press the DAB/FM button to set the device to FM mode
Auto Tuning:
1) To scan upwards, press the Scan button to tune to the next available station
2) To scan downwards, hold the Scan button to tune to the next available station
Manual / Fine Tuning:
1) Press the Up button to increase the frequency by 0.05MHz increments
2) Press the Down button to decrease the frequency by 0.05MHz increments
SETTING UP PRESET STATIONS
Your DG108 can store up to 10 DAB+ and 10 FM station presets (favourites) for quick access
Storing a station preset:
1) Tune your radio to the station you wish to store as a preset
2) Press and hold the Preset button until the text “Preset Empty 1” is shown

DAB-DG108 USER MANUAL
5
3) Using the Up and Down buttons, select the preset number you wish to use and
press Enter to store the station into memory
Returning to a preset station :
1) Press the Preset button to show the preset screen
2) Using the Up and Down buttons, scroll through the station presets (1 thru 10)
3) Press the Enter button to select your preferred preset station
BROWSE STATION INFORMATION
Press the Info button repeatedly to scroll through information transmitted by the station in
either DAB+ or FM modes (where available):
DAB+ FM
1) Multiplexer name 1) * RDS Information
2) Signal Strength 2) Program Type
3) Time and Date 3) Signal Strength
4) * DLS Information 4) Time and Date
5) Program Type 5) Channel Frequency
6) Frequency 6) Audio Mode
* DLS (Dynamic Label Segment): Scrolling text information that may comprise of information
on song titles, sporting results or other details provided by the program broadcaster
* RDS (Radio Data System): Small amounts of digital data supplied by the broadcaster that
may provide song or station details and various news results etc
FACTORY RESET
if a factory reset is required:
1) Hold the DAB+/FM button,then
2) press the Enter button (when prompt) to complete the factory reset
Note: The radio will return to the DAB+ mode and perform a auto-scan on start-up. All
presets or settings will be permanently removed
WHATS IN THE BOX
1 x DAB-DG108, 1 x AC adaptor, 1 x User Manual

DAB-DG108 USER MANUAL
6
TROUBLE SHOOTING / Q & A
The reception is poor in my area. Will your
DG108 work ok? We recommend that you conduct a full
station scan upon first use. This will locate all
available stations in your area and check and
improve any weak signals.
Also you can visit www.digitalradioplus.com.au
to check the signal strength in yourarea
I experience alot of interference when
using digital radios. What could cause this? Other electronic/electrical devices may be
disrupting the supply of power to your
DG108. It is recommended that you trial the
unit on another power socket (circuit) to start
your trouble shooting procedures
How doI ensure that I am receiving the
strongest signal possible? Make sure the antenna is fully extended and free from any obstruction.
What other factors can affect signal
quality? Geographical obstructions such as being at
the bottom of a valley or behind large hills will
reduce your ability to receive a strong signal.
Does the DG108 have a better/stronger
signal receiving capabilities than other
brands on the market?
The technologies behind common DAB+
brands in the market are reasonably identical.
As such there is no real reception difference
between different brands in the market.
For further product information and instruction please visit our product
web page at www.laserco.net or email [e-mail]
Please note: As continual improvements are made to this product, slight operational
differences may occur. For the most up-to-date user manual, please visit our web site.

DAB-DG108 USER MANUAL
7
Warranty Against Defects
Laser Corporation Pty Ltd (“Laser”) warrants your new product to be free from defects in
materials and workmanship for 12 months, from the date of purchase, provided that the
product is used in accordance with accompanying recommendations or instructions where
provided. The benefit of this warranty is in addition to your rights under the Australian
Consumer Law and to other rights and remedies of the consumer under a law in relation to
the goods or services to which the warranty relates.
Through a network of retailers and resellers, Laser will provide you with your choice of a
refund, repair or exchange (where possible) for this product if it becomes defective within the
warranty period. This warranty will no longer apply where the defect is a result of alteration,
accident, misuse, abuse, normal wear and tear, neglect or improper storage.
Please retain your receipt as proof of purchase
How to make a product warranty claim:
Step 1: Find your receipt which proves the date of purchase. Where the date of purchase
cannot be verified, your place of purchase or Laser will make an assessment based on the
date of manufacture, the condition of the Laser Product and the type of defect.
Step 2a): Contact your place of purchase. They will assess the nature of the fault and
refund or replace the product as per their store refund or warranty policy.
Step 2b): If your place of purchase cannot be contacted, then you can contact Laser .
Customer Service with details of your defective Laser Product: Phone: [phone]; or
Email: [email protected]om.au or online www.laserco.net/support/warranty (click on
“Consumers (End Users)”). Our business address is at 1/6-8 Byfield Street, North Ryde,
NSW 2113
Step 3: Laser . will issue you with a Return Authorisation (RA) number within 48 hours.
When requested, send us the defective Product and a copy of your receipt. Laser will cover
the cost of the return delivery.
Step 4: Wait for us to contact you. Once we have received your defective Laser Product for
inspection, we will inform you of our assessment of your claim within 7 days. When we
contact you, we will firstly let you know whether you have a valid claim under this Warranty,
and if so, we will inform you whether your defective Laser Product will be replaced or
repaired, together with the number of days you can expect to wait to receive your replaced
or repaired Laser Product.
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and compensation for
any other reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure does not
amount to a major failure.