Laserco CSH-WTRCTRLR User manual

Manual
Smart Solar Powered Water Controller
(CSH-WTRCTRLR / LSH-WTRCTRLR)
1GET THE APP
2REGISTER OR
LOGIN TO APP
TAP
HERE
3RECOMMENDED APP SETTINGS
LOGIN
existing
account
REGISTER
no
account
QR Codes for
Downloading Apps

4POWERING THE
WATER CONTROLLER
Undo the screw at the bottom and
insert 2 x AA rechargeable batteries
into the Water Controller.
In strong direct sunlight the
Solar Panel on the front of
the Water Controller is able
to power the device and
recharge the batteries
5POWERING
THE GATEWAY
Undo Screw
Insert 2 x AA
Rechargeable Batteries Solar Panel
Connect the Gateway to a USB Power
Adapter using a Micro USB Cable.

6CONNECTING GATEWAY TO APP
Press and HOLD pairing button
on the Gateway for approx
20 seconds until the LED
light starts flashing RED
Flashing
RED Light
TIP
If device
not found
please check
Only 2.4G Wi-Fi
networks are supported

7CONNECTING GATEWAY
TO WATER CONTROLLER
With Batteries installed
Double Tap the Button on
the side of the Water Controller

8USING THE WATER CONTROLLER
Settings
Setup Timer
or Countdown
Control Valve
Open Position
Check
Usage
Battery Level

For more
helpful guides
visit us at
LASER
www.youtube.com/LasercoAu
CONNECT
www.youtube.com/channel/UCCYzBiADapJN55Zzp3yfvLQ
WARRANTY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have
the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
www.laserco.com.au www.connectsmarthome.com.au
• The Water Controller needs the Gateway to work.
The Gateway needs to be connected to the App
first then the Water Controller to the Gateway.
• Please check your Wifi username and password
are correct and you are only using 2.4Ghz Wifi
connections as the 5Ghz band is not supported.
1. The Water Controller is not
Connecting to App
• The Water Controller needs 2 x AA batteries to work.
• If you want the Solar Panel to recharge the battery then
2 x AA rechargeable batteries need to be installed.
• The Solar Panel can recharge the batteries approx
2 - 5% everycouple of hours with strong direct sunlight.
2. The Solar Panel is not Working or the
Water Controller has no Power
TROUBLESHOOTING
9CREATING A TIMER SCHEDULE
Save
Schedule
Set End
Time
Set Start
Time
Set Day
Reoccuring
Set Valve
Open Position