
USER MANUAL
LASER SAFETY AND OPERATING INSTRUCTIONS
STOP AND READ ALL LASER SAFETY DATA
Laser Light is different from any other light source with which you may be familiar. The light
from this product can potentially cause eye injury if not set up and used properly.
Laser light is thousands of times more concentrated than light from any other kind of light
source. This concentration of light power can cause instant eye injuries, primarily by
burning t he retina (the l ight sensitive portion at the back of t he e ye). Even if you c annot
feel “ heat” from a l aser bea m, i t can still potentially injure or bl ind y ou or y our audi ence.
Even v ery s mall a mounts of l aser l ight ar e pot entially haz ardous ev en at l ong di stances.
Laser eye injuries can happen quicker than you can blink.
It i s i ncorrect t o think t hat bec ause t hese l aser ent ertainment pr oducts split t he l aser i nto
hundreds of bea ms or l aser beam i s s canned out i n hi gh speed, that an i ndividual l aser
beam is safe for eye exposure. This laser product uses dozens of mini Watts of laser power
(Class 3B levels internally). Many of the individual beams are potentially hazardous to the
eyes.
It is also incorrect to assume that because the laser light is moving, it is safe. This is not true.
Nor, do the laser beams always move. Since eye injuries can occur instantly, it is critical to
prevent t he pos sibility of any direct ey e ex posure. In t he laser s afety regulation, it i s n ot
legal to aim Class 3B lasers in areas which people can get exposed. This is true even if it is
aimed below people’s faces, such as on a dance floor.
Do not operate laser without first reading and understanding all safety and
technical data in this manual
Always set up and install all laser effects so that all laser light is at least 3
meters (9.8 feet) above the floor on which people can s tand. See “Proper
Laser Set-up & Usage” section later in this manual
After set up, and prior to public use test laser to ensure proper function. Do
not use if any defect is detected. Do not use if laser emits only one or two
laser beams rather than dozens/hundreds, as this could indicate damage to
the diffraction grating optic, and could allow emission of higher laser levels.