LaserLight Mini clock laser light LL350MCL User manual

Mini clock laser light
User manual
Please read this manual carefully before use!

Mini clock laser user manual
- - 1 - -
Contents
Introduction & Caution----------------------------------------------------------------P2
Silkscreen --------------------------------------------------------------------------------P3
Safety instruction/Installation instruction--------------------------------------P4
Function instruction--------------------------------------------------------------------P5
IR Remote control/Time setting --------------------------------------------------------P6
Keyboard function/Rigging--------------------------------------------------------------P7
Product size-------------------------------------------------------------------------------P8
Clearing and Maintenance/caution-------------------------------------------------P8
Warranty card------------------------------------------------------------------------------P8

Mini clock laser user manual
- - 2 - -
Introduction
Thank you for your patronage. We are confident that our excellent products and service can satisfy you. For
your own safety, please read this user manual carefully before installing the device. And please keep the
manual carefully for future reference.
The moving head with good human nature and perfect combination of industrial design, perfect construction.
Body with lead alloy and high temperature resistance of engineering plastics, good for heat sink. Electron
positioning technology of moving construction. Good meet CE stand, with internal DMX512 signal control.
Widely using in disco, TV station,dancing hall,nightclub, indoor and outdoor performance and so on.
Following spare parts are included with the fixture:
Caution
Please make sure above attachments is complete and there are no obvious transport damages. Should you
notice any damages on the A/C connection cable or on the casing, do not take the device into operation and
immediately consult your local dealer.
Parts
Qty
Units
Device
1
pcs
User manual
1
pcs
Power adapter
1
pcs
USB connector of keyboard
1
pcs
USB transfer PS2 connector
1
pcs
Wireless remote control
1
pcs
Key
1
pcs
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!

Mini clock laser user manual
- - 3 - -
Symbol Instruction On The Device
-------------------------------------------------------------------------------CE Certificate
-------------------------------------------------------------------Only indoor using
-----------------------------------------------------------------------Environmental protection
-----------------------------------------The minimum distance from lighted objects(meter)
------------------------------------------------------------Max ambient Temp
---------------------------------------------------Max housing Temp
------------------------------------------------------------------------- Safety caution
-------------------------------------------------------------------------Be careful of burn
------------------------------------------------------------------------Danger high voltage
------------------------Not allow installation directly on the surface of ordinary combustible materials
Warning!
Damages caused by the disregard of this user manual are not subject to warranty.
The dealer will not accept liability for any resulting defects or problems.

Mini clock laser user manual
- - 4 - -
Safety instruction
Once after received this product , please take and put carefully. And check cautiously that whether the
product was damaged or not during the transportation, if yes, please not use this fixture and contact local
dealers or manufacturers as soon as possible.
The applicable temperature for the lighting is below 40°C. Do not use the lighting above the
temperature.ta=40℃
The fixture applicable widely, it must keeping clean, Please do not in overheat or dusty environment use
the device. Do not touching Chemical liquid.
Should be paid attention to the use of this product: fire, heat, electric shock, loss caused by severe or fatal
injury, in electricity or to read the instructions before installation, follow the safety instruction and pay
attention to the manual and warning signs on the equipment, if you have any other questions about how safe
operating equipment, please contact the dealer or manufacturer as soon as possible.
According to the procedures described in this operating instructions, please do not open by yourself. Any
break, please contact professionals, and must by the professional and technical personnel for repair.
Do not power in and open before installation. Let have a rest when continuous work for eight hours. It will
longer the device using lift.
Fixed installation, to prevent the strong vibration or impact of the device.
The distance between the device and the projectile to keep at least 1 meter.
Never look directly into the light source,as sensitive persons may suffer an epileptic shock(especially meant
for epileptics)!
When light output position of the device of dustproof glass breakage, cracks or other visible
damage, user should replace the new glass to continue to use.
Installation
When install this equipment please make sure there's no flammable surfaces (decorated things, etc) and
minimum distance of 0.5M from the equipment to the flammable.
The installation of the effect has to be built and constructed in a way that it can hold 10 times the weight
and without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. an appropriate safety
rope.Never stand directly below the device when mounting, removing or servicing the fixture.
Description of the Device
1. Input voltage: In AC100V~240V OUT DC12V 2A 50/60Hz
2. Input power：DC12V
3. Total power:20W
4. Light source：R：150mw/650nm，G：50mw/532nm, B:150mw/450nm
5. Control mode: Auto/Sound/Clock display/ keyboard/remote control
6. Scanning system：10K scanner

Mini clock laser user manual
- - 5 - -
7. Built-in pattern: 40 Static patterns, 60 dynamic patterns
8. Surface temp: Tb=35ºC ( this data testing when the environment temp is 25ºC)
9. Modulation: TTL
10. N.W：1.2KG G.W：2.2KG
11. Product size:：208 X 179 X 162mm
12. Inner packing size:：36 X 23 X 17cm
13. Outer packing size:：74 X 48 X 38cm(8pcs）
Function Instruction
Front plate
【A】Microphone, to receiving the sound signal with in sound mode.
【B】Single potentiometer, to adjust the microphone sensitivity, from left to right.
【C】Blue LED，the indicator light to learn the remote control code；
【D】Red and Green LED，the indicator light which show the light is on work, details as below:
Mode
Light
Red light
status
Green light
power
Auto
Quick flicker
open
Sound
Follow sound flicker
open
Simulation clock mode
open
open
Digital clock mode
open
open
Keyboard mode
Slow flicker
open
Standby
Close
open
【E】Key switch，the button to learn the remote control code；
Bank panel
A
B
C
D
E

Mini clock laser user manual
- - 6 - -
【F】Safety Lock，control the laser. The light open when at ON status, closed when at OFF.
【G】Interconnection switch, to turn on or off the laser by long-distance.
【H】Key switch，change the control mode: Auto—Sound-- Analog Clock-- Digital clock-- keyboard
【I】Keyboard connection,USB and PS2 interface connection；
【J】Potentiometer to adjust the pattern size, the right the bigger；
【K】DC outlet: DC12V；
【L】Fan，size：5x5x1mm、DC12V 0.11A；
Note！！！No occlusions behind the fan when on work.
The remote control function
The remote control diagram:
【A】Change the control mode；
【B】Laser On/Off；
【C】Select the Static pattern，long press to select color；
【D】Select Dynamic pattern, long press to running the pattern；
Remote control code learning operation
Note！！！We have settle down before delivery！
1、Remove the code：long press【E】（ for 5S）， the blue LED【D】in front plate will be light up,When it off
is done；
2、Learning remote control code：press key switch【E】， blue LED【C】flash，and press any button you want
to learn, blue LED【C】flash 4 times is done.
Clock setting
Press【A】， Set to clock mode；Press【D】to edit；Press【B】or【C】to modify time, press【B】to modify
the hour，press【C】to modify the minute；
Press【D】to save and exit. The【B】and【C】invalid if not press【D】.

Mini clock laser user manual
- - 7 - -
Keyboard function
Press F1, select mode: Auto—Sound-- Analog Clock-- Digital clock-- text editing
PressF2, 7 color to selectable.
When editing text, press ESC to delete the text.
When editing text, press (Back Space) to last step.
Caps Lock for text Transform
F3：zoom / F4：rotation / F5：X-axis rotation / F6：Y-axis rotation / F7：X-axis translation / F8：Y-axis
translation
F9：Wave
Rigging and installation:
1 Hook clamp
2 Handle
1. The light can work properly when the ambient temperature is -25~40℃, do not use the light when the
ambient temperature is over 40℃or under -25℃.
2. The installation has to be built and constructed in a proper way that the rigging can hold 10 times of the
SPACE KEY

Mini clock laser user manual
- - 8 - -
light weight .
3. Don't stand under the light when installing, disassembling, repairing or maintaining the light.
4. Please use safety chain to ensure good installation.
5. Fix the M8 screw of the hook clamp in ￠12.5mm hole of the light handle.
Lighting dimension
Cleaning and maintenance
Cleaning should be performed every 15-day period, by using a sponge which is dipped with alcohol,
rather than wet cloth or other chemical liquid, to clean the mirror.
Attention
Do not see directly light source when open the light, and make sure power off before do any installation
or maintenance.
Warranty Card
We will provide 1 year warranty under the condition that user has operated the light
Cut off power before cleaning and maintenance!
CAUTION
Wires connection must be professional person!
CAUTION

Mini clock laser user manual
- - 9 - -
normally and lifetime service. We won't provide warranty if the damage is caused by
artificial or force majeasure event. Please cut this warranty card and shipped it along
with the product to our factory when applying for warranty.
Product：Purchasing date：Code of invoice：
Warranty date: From To
User’s name：Add：
Company：Tel：