LaserLine LR1050DD User manual

LaserLine Manufacturing, Inc.
LR1050DD DIGITAL
LASER THEODOLITE
Long Range Alignment Laser
OWNER’S MANUAL
1810 SE First Street, Suite H, Redmond, OR 97756



©2011 LaserLine Manufacturing, Inc.
LR1050DD OWNER’S MANUAL
Long Range Alignment Laser
TABLE OF CONTENTS
Section I Introduction
 
Section II Laser Safety
 
 
Section III Operator’s Manual
 
 
 
 
 
 
1

PRODUCT DESCRIPTION
2
FEATURES
 


 

 
 
 
 



Fan Lens 2000-0035





Verte
246°
site
60°

3
WClass IIIa













LASER SAFETY
1). WARNING PLACARD
2). OPERATORS CARD
       
LASER SAFETY
When operating Class IIIa lasers with an output of less than 0.005 watts (5mW):
1. Operators and crewmembers shall read this manual and become familiar with all-operating
procedures and Safety considerations on the vehicle.
2. Post at least one 10” X 7” Laser warning placard (Item 1) at each laser location.
3. Turn the laser off when it is not required or if left unattended.
4. Don’t look directly into the laser or at the Laser Spot on a reflective surface. DO NOT point the laser
at another person.
5. Set the laser up well above the heads of employees when possible. Otherwise, set it up well below.
6. Have “Laser Operator Training and Qualification” card (Wallet size) (Item 2) in the possession of
individual responsible for laser operation.
1). Warning Placard
THIS PROGRESSIVE CONTRACTOR IS USING A
LASER
AVOID DIRECT EYE EXPOSURE
Laserline Manufacturing, Inc.
1810 SE First Street, Suite H, Redmond, Or. 97756
Phone: [phone] Fax: [phone] E-mail: [email protected]
2). Operators Card
Front Back
iii
Laser Safety Considerations
When operation laser with an output power of less than 0.005 watts (5 mW)
1. Post at least one LaserLine laser warning placard at each laser location.
2. Tun the laser off when it is not required or is left unattended for a substantial
period of time.
3. Do not look directly into the laser or point the laser at another person unless
a fan lens is in use and the viewer is at least 500 feet away.
4. Set the laser up well above the heads of employees when possible:
otherwise, set it up well below.
LASER OPERATOR TRAINING AND QUALIFICATION CARD
By signing below, __________________________________________
indicates that he is familiar with the laser safety consideration on the reverse
side of this card and is qualified to operate Laserline Manufacturing, Inc. laser
with a power output of less than 0.005 watts. (5 mW)
__________________________________ ____________________
Operator’s Signature Date
This card must be kept in the laser operator’s possession
1810 SE 1
st
St., Suite H
Laserline MFG., INC
Redmond, OR 97756
Ph. 541-548-0882
LASER SAFETY
When operating Class IIIa lasers with an output of less than 0.005 watts (5mW):
1. Operators and crewmembers shall read this manual and become familiar with all-operating
procedures and Safety considerations on the vehicle.
2. Post at least one 10” X 7” Laser warning placard (Item 1) at each laser location.
3. Turn the laser off when it is not required or if left unattended.
4. Don’t look directly into the laser or at the Laser Spot on a reflective surface. DO NOT point the laser
at another person.
5. Set the laser up well above the heads of employees when possible. Otherwise, set it up well below.
6. Have “Laser Operator Training and Qualification” card (Wallet size) (Item 2) in the possession of
individual responsible for laser operation.
1). Warning Placard
THIS PROGRESSIVE CONTRACTOR IS USING A
LASER
AVOID DIRECT EYE EXPOSURE
Laserline Manufacturing, Inc.
1810 SE First Street, Suite H, Redmond, Or. 97756
Phone: [phone] Fax: [phone] E-mail: [e-mail]
2). Operators Card
Front Back
iii
Laser Safety Considerations
When operation laser with an output power of less than 0.005 watts (5 mW)
1. Post at least one LaserLine laser warning placard at each laser location.
2. Tun the laser off when it is not required or is left unattended for a substantial
period of time.
3. Do not look directly into the laser or point the laser at another person unless
a fan lens is in use and the viewer is at least 500 feet away.
4. Set the laser up well above the heads of employees when possible:
otherwise, set it up well below.
LASER OPERATOR TRAINING AND QUALIFICATION CARD
By signing below, __________________________________________
indicates that he is familiar with the laser safety consideration on the reverse
side of this card and is qualified to operate Laserline Manufacturing, Inc. laser
with a power output of less than 0.005 watts. (5 mW)
__________________________________ ____________________
Operator’s Signature Date
This card must be kept in the laser operator’s possession
1810 SE 1st St., Suite H
Laserline MFG., INC Redmond, OR 97756
Ph. 541-548-0882
LASER SAFETY
When operating Class IIIa lasers with an output of less than 0.005 watts (5mW):
1. Operators and crewmembers shall read this manual and become familiar with all-operating
procedures and Safety considerations on the vehicle.
2. Post at least one 10” X 7” Laser warning placard (Item 1) at each laser location.
3. Turn the laser off when it is not required or if left unattended.
4. Don’t look directly into the laser or at the Laser Spot on a reflective surface. DO NOT point the laser
at another person.
5. Set the laser up well above the heads of employees when possible. Otherwise, set it up well below.
6. Have “Laser Operator Training and Qualification” card (Wallet size) (Item 2) in the possession of
individual responsible for laser operation.
1). Warning Placard
THIS PROGRESSIVE CONTRACTOR IS USING A
LASER
AVOID DIRECT EYE EXPOSURE
Laserline Manufacturing, Inc.
1810 SE First Street, Suite H, Redmond, Or. 97756
Phone: [phone] Fax: [phone] E-mail: [e-mail]
2). Operators Card
Front Back
iii
Laser Safety Considerations
When operation laser with an output power of less than 0.005 watts (5 mW)
1. Post at least one LaserLine laser warning placard at each laser location.
2. Tun the laser off when it is not required or is left unattended for a substantial
period of time.
3. Do not look directly into the laser or point the laser at another person unless
a fan lens is in use and the viewer is at least 500 feet away.
4. Set the laser up well above the heads of employees when possible:
otherwise, set it up well below.
LASER OPERATOR TRAINING AND QUALIFICATION CARD
By signing below, __________________________________________
indicates that he is familiar with the laser safety consideration on the reverse
side of this card and is qualified to operate Laserline Manufacturing, Inc. laser
with a power output of less than 0.005 watts. (5 mW)
__________________________________ ____________________
Operator’s Signature Date
This card must be kept in the laser operator’s possession
1810 SE 1st St., Suite H
Laserline MFG., INC Redmond, OR 97756
Ph. 541-548-0882

4
LASER SAFETY 







SAFETY CONSIDERATIONS:






CAUTION! The use of optical instruments with this prod-
uct will increase eye hazard.






CAUTION! Use of controls or adjustments or performance
of procedures other that those specified herein may result
in hazardous radiation exposure.
WARNING! Under no circumstances attempt to open or
disassemble Laser Housing. Doing so may cause exposure
to potentially hazardous levels of Laser Radiation.








NOTE: 



CAUTION! 









DESCRIPTION OF COMPLIANCE
LASER SAFETY 
5
1
5

6
2
4

6
GENERAL LR1050DD SETUP AND OPERATION
SETUP AND OPERATION
1. MOUNT



2. LASER POWER-UP



3. INSTRUMENT POWER-UP

4. ACTIVATE SCALE

5. SELECT VERTICAL SCALE

6. ALIGN

7. SELECT HORIZONTAL 

  
 





 

 





  





 















  
 
 
 
 
 
  
 
 
  
  
   
   
   
  
 
  
   
  

  



PRODUCT NOMENCLATURE
7
2
10 11
13
8
5
4
9
12
3
6
7
16
17
14
1
18
19
20
21 22
Vertical Angle
Display
Horizontal Angle
Display
Optional
23

PRODUCT SPECIFICATIONS





WARRANTY
FACTORY SERVICE CENTER


Redmond, OR 97756
FACTORY SERVICE: 
SERVICE WARRANTY: 
FOR ALL WARRANTY: Order Processing

NON-WARRANTY

8
DISTANCE
500’ (152 m)
1000’ (305 m)
1500’ (457 m)
2000’ (610 m)
2500’ (762 m)
5280’ (1609 m)
DIAMETER
0.8” (2.0 cm)
1.1” (2.8 cm)
1.4” (3.6 cm)
1.7” (4.3 cm)
2.0” (5.1 cm)
4.0” (10.2 cm)
LASER SPOT SIZE CHART
LR1050DD SPECIFICATIONS
LASER 635NM CLASS IIIA
POWER 5MW (NOMINAL)
BEAM DIAMETER .07” AT EXIT. SEE CHART FOR DISTANCE
POWER 10-14 VDC AT 0.1 AMPS PER HOUR
TELESCOPE 30X WITH STADIA (45MM DIAMETER)
OPTICAL PLUMMET 2.2X
LEVELING BASE 3 SCREW TRIBRACH
ACCURACY 5 OR 10 ARC SELECTABLE
HEIGHT 12
7
/8” (30.70 CM)
LENGTH 7
5
/16 ” (17.78 CM)
WIDTH 6
7
/16 ” (15.64 CM)
OPERATING TEMPERATURE 0° / 120° F (-18° / +50° C)
STORAGE TEMPERATURE -40° / +150° F (-40° / +65° C)
SHIPPING WEIGHT 29 LBS (13.2 KG)









1810 SE First Street, Suite H, Redmond, OR 97756






All content and images © 2011 LaserLine Mfg., Inc. All Rights Reserved.