LAUNCH TECH TSAP-1 User manual

TSAP-1 GB VHL1-03-05
Quick reference guide
TSAP-1
Select 4 or 5 wheels then confirm
Low Bat
Pass
Fail
Tx
Low Bat
Pass
Fail
Tx

TSAP-1 GB VHL1-03-05
USB CONNECTOR / CHARGING THE BATTERY
The USB connection allows software updates to be installed
onto the tool using the WEB VT program.
TPM sensor results can also be printed using this program.
The USB connection allows to charge the internal battery.
The symbol is red during the charge.
The symbol becomes green when the charge is complete.
It can be done from a PC (14 hours) or with the wall
charger (5 hours).
LANGUAGE
SELECT the language then confirm (OK).
SELECT the language then confirm (OK).